Manual do usuario do pulverizador de mochila con batería FlowZone Zephyr FZSATJ-3

1. Carga e instalación da batería

1. Connect the 21V/1A charger to a standard electrical outlet.
2. Insert the 18V Li-Ion battery pack into the charger. The indicator light on the charger will show charging status.
3. Unha vez cargada por completo, desconecte a batería do cargador.
4. Open the battery compartment cover on the sprayer.
5. Insert the charged battery pack into the compartment, ensuring it clicks securely into place.
6. Pecha a tapa do compartimento da batería.

Image: The FlowZone Zephyr sprayer with its 18V battery and 21V/1A charger, illustrating the components included.

Imaxe: Primeiro plano view of the battery compartment on the FlowZone Zephyr sprayer, showing a battery properly inserted.

Image: A QuickSwap adapter with a Dewalt battery being inserted into the battery compartment of the FlowZone Zephyr sprayer, demonstrating compatibility.

2. Nozzle and Hose Connection

1. Attach the desired TeeJet-style nozzle to the spray wand. Ensure it is securely tightened to prevent leaks.
2. Connect the spray hose to the outlet port at the base of the sprayer. Hand-tighten until snug.

Image: The FlowZone Zephyr sprayer with an illustration of the four included TeeJet-style nozzles: 80˚ fan, 45˚ fan, 0˚ pin stream, and adjustable cone.

3. Enchendo o depósito

1. Ensure the sprayer is on a level surface.
2. Desenrosque a tapa do tanque e retírea.
3. Carefully pour the desired liquid (water, herbicide, pesticide, etc.) into the 4-gallon tank. Do not overfill.
4. Securely replace the tank cap, ensuring a tight seal.

1. Acendido e apagado

Locate the single pressure ON/OFF toggle switch on the side of the sprayer. Flip the switch to the 'ON' position to activate the pump. Flip to 'OFF' to deactivate.

Imaxe: Primeiro plano view of the red ON/OFF toggle switch located on the side of the FlowZone Zephyr sprayer.

2. Spraying Techniques and Nozzle Selection

The Zephyr sprayer offers optimized flow capabilities, with a minimum flow rate of 0.20 GPM, making it suitable for various applications.

• Boquilla axustable: Provides a versatile spray pattern from a fine mist to a solid stream. Rotate the nozzle head to adjust.
• Fan Nozzles (45˚ and 80˚): Ideal for broad coverage, such as general maintenance, weed control, or applying fertilizers.
• Pin Stream Nozzle (0˚): Delivers a concentrated stream for spot treatments or reaching distant targets up to 20 feet.

Image: A person operating the FlowZone Zephyr sprayer in a grassy area, demonstrating the effective 20-foot spray distance.

Image: A close-up shot of the sprayer nozzle producing a wide fan spray pattern.

Image: A close-up shot of the sprayer nozzle producing a fine mist spray pattern.

Image: A close-up shot of the sprayer nozzle producing a concentrated pin stream spray pattern.

Image: A close-up shot of the sprayer nozzle producing an adjustable cone spray pattern.

1. Limpeza despois do uso

To ensure longevity and prevent chemical residue buildup, flush the sprayer with clean water after every use. Do not leave solvents or chemicals in the tank for extended periods.

1. Empty any remaining chemical solution from the tank.
2. Enche o depósito con auga limpa.
3. Operate the sprayer for a few minutes, spraying the clean water through the wand and nozzle.
4. Repeat if necessary until all chemical traces are removed.
5. Limpar o exterior do pulverizador con anunciosamp pano.

2. Almacenamento

Store the sprayer in a cool, dry place, away from direct sunlight and freezing temperatures. Remove the battery pack if storing for an extended period.