SHAD 4P System for KOVE 800 X Adventure Motorcycle

Produto rematadoview

The SHAD 4P System is a robust side case fitting kit specifically designed for the KOVE 800 X Adventure motorcycle. Developed and manufactured in Barcelona, this system provides a secure and stable platform for attaching SHAD side cases and bags. Its construction features a 20mm diameter steel structure, coated with high-hardness metallic paint, ensuring maximum firmness and resistance. The system is further reinforced with a crossbar, making it suitable for demanding off-road conditions.

Características principais:

• 100% Designed and manufactured in Barcelona.
• Provides secure fixings for mounting side cases on the motorcycle.
• Constructed from 20mm diameter steel for enhanced durability and stability.
• Reinforced with a crossbar for extreme conditions.
• Importante: Not compatible with SH23 side cases.

O que hai na caixa

Ao desembalar, comproba que estean presentes todos os compoñentes:

• SHAD 4P System fixing frames (left and right)
• Complete screw kit for installation
• Manual de instalación (este documento)

Image: SHAD 4P System installed on a KOVE 800 X Adventure motorcycle, showing the side cases mounted.

Configuración e instalación

This section provides general guidelines for installing the SHAD 4P System. For detailed, model-specific instructions, please refer to the graphical installation guide provided with your product or available on the official SHAD websitio.

1. Preparación: Ensure the motorcycle is on a stable surface (e.g., a center stand or paddock stand). Turn off the engine and allow any hot components to cool down. Gather all tools required (typically wrenches, Allen keys, and a torque wrench).
2. Eliminar compoñentes existentes: Depending on your motorcycle model, it may be necessary to remove certain existing components such as passenger grab handles, exhaust heat shields, or existing luggage racks to access the mounting points.
3. Identificar os puntos de montaxe: Locate the designated mounting points on the motorcycle frame, typically near the rear passenger footpegs and under the rear seat/fender.
4. Attach Main Brackets: Secure the main brackets of the 4P System to the motorcycle frame using the provided screws and hardware. Do not fully tighten the screws at this stage.
5. Instalar a barra transversal: Connect the crossbar between the left and right 4P System frames. This crossbar provides additional rigidity and stability.
6. Aliñar e axustar: Once all components are loosely fitted, ensure proper alignment of the frames. Then, progressively tighten all screws to the torque specifications provided in the detailed installation guide. Over-tightening can damage components, while under-tightening can lead to instability.
7. Verificación final: Verify that all components are securely fastened and that there is no interference with moving parts of the motorcycle (e.g., suspension, chain, wheels).

Imaxe: Lateral view of the SHAD 4P System frame mounted on the motorcycle, highlighting the robust steel construction.

Instrucións de funcionamento

The SHAD 4P System is designed for easy attachment and detachment of compatible SHAD side cases and soft bags.

Attaching Side Cases/Bags:

1. Aliñar: Position the side case or bag onto the 4P System frame, ensuring the mounting points on the case align with the system's pins.
2. Participar: Gently push the case onto the frame until it clicks into place. For hard cases, ensure the locking mechanism engages securely. For soft bags, secure all straps and buckles to the frame.
3. Verificar: Always double-check that the case or bag is firmly attached and cannot be easily removed without disengaging the locking mechanism.

Detaching Side Cases/Bags:

1. Desbloquear: For hard cases, use the key to unlock the case from the 4P System. For soft bags, unfasten all straps and buckles.
2. Lanzamento: Press the release button or lever (if applicable) and carefully lift the case or bag off the frame.

Image: Motorcycle equipped with the SHAD 4P System, demonstrating the capacity to carry hard side cases and a top case.

Mantemento

Regular maintenance ensures the longevity and safe operation of your SHAD 4P System.

• Limpeza: Clean the steel structure with a mild soap and water solution. Avoid abrasive cleaners or solvents that could damage the metallic paint finish. Rinse thoroughly and dry with a soft cloth.
• Inspección: Periodically inspect all mounting points, screws, and the crossbar for any signs of wear, corrosion, or loosening.
• Comprobación de estanqueidade: Re-check the tightness of all screws and bolts, especially after the first few hundred kilometers of use and before long trips. Refer to the original torque specifications.
• Lubricación: If applicable, lubricate any moving parts of the locking mechanisms on your side cases according to their specific instructions.
• Danos: In case of any damage to the frame, such as bends or cracks, discontinue use immediately and contact SHAD support for replacement parts or advice.

Resolución de problemas

This section addresses common issues you might encounter with the SHAD 4P System.

Issue: Side cases feel loose or rattle.

• Solución: Check all mounting bolts on the 4P System frame and ensure they are tightened to the correct torque. Verify that the side cases are properly engaged with the frame's locking mechanism.

Issue: Difficulty attaching or detaching side cases.

• Solución: Ensure the 4P System frames are correctly aligned and not bent. Check for any obstructions. For hard cases, ensure the locking mechanism is fully disengaged when detaching, and properly aligned when attaching. Lubricate the locking mechanism if necessary.

Issue: Visible corrosion on the frame.

• Solución: Clean the affected area thoroughly and apply a suitable rust-inhibiting paint or coating. Regular cleaning and drying, especially after exposure to rain or road salt, can prevent corrosion.

Especificacións

Información da garantía

The SHAD 4P System comes with a two-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accidents, misuse, neglect, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

For warranty service, please contact your authorized SHAD dealer or SHAD customer support with your product details and proof of purchase.

Atención ao cliente

If you have any questions, require technical assistance, or need to report an issue with your SHAD 4P System, please contact SHAD customer support:

• Websitio: Visit the official SHAD website for FAQs, detailed installation guides, and contact forms.
• Distribuidores autorizados: Contact your local authorized SHAD dealer for assistance and service.

When contacting support, please have your product model number (K0XD844P) and purchase information readily available.