iMaihom 50W Motion Sensor Outdoor Light

Introdución

Thank you for choosing the iMaihom 50W Motion Sensor Outdoor Light. This hardwired LED floodlight provides 5000 lumens of 6500K daylight white light, enhancing security and visibility for your outdoor spaces. Featuring advanced motion detection and a dusk-to-dawn function, this IP65 waterproof light is designed for reliable performance in various weather conditions. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Información de seguridade

• Desconecte sempre a alimentación no disyuntor antes de instalar, realizar o mantemento ou limpar a instalación.
• Consulte a un electricista cualificado se non está seguro sobre o proceso de instalación.
• Asegúrese de que todas as conexións eléctricas se realicen segundo os códigos e as ordenanzas locais.
• Do not look directly into the LED light source when illuminated, as it may cause eye damage.
• This product is designed for outdoor use and is IP65 waterproof. However, ensure proper sealing during installation to maintain water resistance.
• Do not attempt to disassemble or modify the fixture, as this will void the warranty and may pose a safety risk.

Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• iMaihom 50W Motion Sensor Outdoor Light (1 unit)
• Mounting Bracket (1 unit)
• Wire Nuts (2 units)
• Screws and Expansion Rubber Plugs (various quantities for mounting)
• Gasket (1 unit)
• Manual de instrucións (este documento)

Figure 1: Included Parts List

Características do produto

• Iluminación brillante: Emits 5000 lumens of 6500K daylight white light for extensive coverage.
• Detección avanzada de movemento: Features a 180-degree detection angle and a 19–72 ft range, with adjustable lighting duration from 1–10 minutes.
• Dusk to Dawn Function: Built-in light sensor automatically turns the floodlight ON at dusk and OFF at dawn.
• Impermeable IP65: Designed to withstand harsh weather conditions, ensuring year-round reliability.
• Fácil instalación: Simple 3-step hardwired installation process.
• Cabezas axustables: Three light heads are 360° adjustable to direct light where needed.

Configuración e instalación

Before installation, ensure the power supply is turned off at the circuit breaker to prevent electrical shock.

1. Retirar o dispositivo antigo (se corresponde): Desconecte e retire con coidado calquera lámpada existente da caixa de conexións.
2. Instalar soporte de montaxe: Fixe o soporte de montaxe fornecido á caixa de conexións cos parafusos axeitados. Asegúrese de que estea firmemente fixado.
3. Conectar cableado: Connect the wires from the new iMaihom light to the household wiring using the included wire nuts. Match colors: black to black (hot), white to white (neutral), and green to ground (bare copper). Wrap electrical tape around wire nuts for added security.
4. Montar a luz: Align the light fixture with the mounting bracket and secure it with the long machine screw provided. Ensure the gasket is properly seated between the fixture and the mounting surface to prevent water intrusion.
5. Axustar os cabezales das luces: Loosen the Phillips screw on the main head to adjust its angle. The side LED heads can also be articulated to direct light as desired.

Figure 2: Hardwired Installation Steps

Figure 3: Wall Mounted and Soffit Mounted Options

Instrucións de funcionamento

The iMaihom motion sensor light offers multiple operating modes and adjustable settings located on the bottom of the motion sensor unit.

Diales de control:

• TEST Mode (Left Dial): Used for initial setup and testing. In this mode, the light will turn on for 5 seconds when motion is detected, regardless of ambient light.
• TIME (Middle Dial): Adjusts the duration the light stays on after motion is detected, ranging from 10 seconds to 10 minutes.
• SENSITIVITY (Right Dial): Controls the detection range of the motion sensor (L: 19-26.2ft, M: 26.2-39.3ft, H: 39.3-72ft). Adjust this to prevent false triggers from small animals or distant objects.

Modos de funcionamento:

• Modo sensor de movemento: The light activates only when motion is detected in dark conditions. The duration and sensitivity are set by the TIME and SENSITIVITY dials.
• Dusk to Dawn Mode (D2D): The built-in photocell sensor automatically turns the light ON when ambient light levels fall below a certain threshold (dusk) and OFF when light levels rise (dawn). Motion detection is typically overridden or integrated based on specific settings.

Figure 4: Control Dials for Settings

Figure 5: Dusk to Dawn Mode Operation

Mantemento

• Limpeza: Limpar o dispositivo cun suave, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Inspección: Inspeccione periodicamente a instalación para detectar calquera signo de danos, conexións soltas ou desgaste.
• Coidado das lentes: Manteña a lente do sensor de movemento limpa e libre de obstrucións (por exemplo, sucidade, arañaswebs) to ensure optimal performance.

Resolución de problemas

Especificacións

Garantía e Soporte

iMaihom products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official iMaihom websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.