mGYDY Bafang 810S LCD eBike Display User Manual

1. Introdución

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Información de seguridade

• Asegúrate sempre de que a pantalla estea montada de forma segura antes de conducir.
• Non intente desmontar nin modificar a pantalla. Isto podería anular a garantía e causar danos.
• Keep the display away from extreme temperatures and direct sunlight for prolonged periods.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• Pay attention to your surroundings while riding. Do not become overly distracted by the display.

3. Contido do paquete

Verifica que todos os elementos estean presentes no paquete:

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. Produto rematadoview

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

Imaxe: Acabadoview of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

Características principais:

• Color VA LCD: Amplo viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• Visualización completa de datos: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltage por centotage).
• Brillo axustable: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• Modo de camiñada: Provides assistance when walking alongside your e-bike.
• Visualización do código de erro: Indicates system faults.
• Grao impermeable: IP65, resistant to rain and splashing water.

5. Especificacións

Imaxe: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. Configuración e instalación

Verificación de compatibilidade:

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the Protocolo de comunicación UART e a 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

Imaxe: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

Pasos de instalación:

1. Montar a pantalla: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. Conecte o cable: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. Xestión de cables Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. Acendido inicial: After installation, power on your e-bike to verify the display functions correctly.

7. Instrucións de funcionamento

The 810S display features an intuitive interface with an independent button for navigation and settings.

Funcións de visualización:

• Indicador de velocidade: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• Mileage Indicator: Displays Odometer (total distance), Trip distance, and Riding Time.
• Indicador de batería: Provides a 5-level power indicator and voltage por centotage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• Control de faro: Activate or deactivate your e-bike's headlight (if connected).
• Modo de camiñada: Engage for low-speed assistance when pushing the bike.
• Código de erro: Displays codes if a system fault is detected.

Imaxe: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

Axuste da configuración:

• Configuración de brillo: Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• Contrasinal de acendido: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

Imaxe: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. Mantemento

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• Limpeza: Use un suave, damp pano para limpar a pantalla. Evite produtos de limpeza abrasivos ou solventes que poidan danar a pantalla ou oasing.
• Resistencia á auga: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• Almacenamento: When not in use for extended periods, store the e-bike and display in a dry, cool place, away from direct sunlight and extreme temperatures.
• Comprobación de conexión: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

Imaxe: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9 Solución de problemas

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• A pantalla non se acende:
  • Check if the e-bike battery is charged and turned on.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• Código de erro mostrado:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• Lecturas inexactas:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

Se os problemas persisten, póñase en contacto co vendedor ou cun técnico cualificado de bicicletas eléctricas para obter axuda.

10. Garantía e soporte

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.