1. Introdución
This manual provides detailed instructions for the installation, operation, and maintenance of your Fitop C&C-0511VS2 Bathroom Exhaust Fan with Light. This unit is designed to effectively remove moisture and odors from your bathroom, featuring a powerful 130 CFM fan and an integrated 1100LM LED light with adjustable color temperatures (3000K/4000K/5000K). Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
2. Información de seguridade
AVISO: Para reducir o risco de incendio, descarga eléctrica ou lesións ás persoas, observe o seguinte:
- Os traballos de instalación e cableado eléctrico deben ser realizados por persoas cualificadas de acordo con todos os códigos e normas aplicables, incluídos os códigos e normas de construción con clasificación contra incendios.
- Precísase aire suficiente para a combustión e a evacuación adecuada dos gases a través da cheminea (cheminea) dos equipos de combustión para evitar o retrotraxe. Siga as directrices do fabricante de equipos de calefacción e as normas de seguridade, como as publicadas pola Asociación Nacional de Protección contra Incendios (NFPA) e a Sociedade Americana de Enxeñeiros de Calefacción, Refrigeración e Aire Acondicionado (ASHRAE) e as autoridades de códigos locais.
- Ao cortar ou perforar a parede ou o teito, non dane o cableado eléctrico nin outras utilidades ocultas.
- Os ventiladores con conductos deben estar sempre ventilados ao aire libre.
- Non use este ventilador con ningún dispositivo de control de velocidade de estado sólido.
- Esta unidade debe estar conectada a terra.
- Desconecte sempre a alimentación no panel de servizo antes de realizar o mantemento ou a limpeza da unidade.
3. Contido do paquete
Comprobe que todos os compoñentes estean presentes e non estean danados:
- Bathroom Exhaust Fan Housing
- Panel de luz LED
- Duct Connector (4-inch diameter)
- Mounting Hardware (Hanger Bars, Screws)
- Manual de usuario
4. Especificacións
| Marca | Fitop |
| Nome do modelo | C&C-0511VS2 |
| Cor | Prata |
| Deseño de ventiladores eléctricos | Ventilador de escape |
| Fonte de enerxía | AC |
| Dimensións do produto (P x A x A) | 14.28" x 14.28" x 8.5" |
| Tipo de habitación | Baño |
| Características especiais | LED Light, High Air Flow, Quiet Operation |
| Tipo de montaxe | Montaxe no teito |
| Nivel de ruído | 1.5 Sons |
| Wattage | 47 vatios |
| Capacidade de caudal de aire | 130 pés cúbicos por minuto (CFM) |
| Voltage | 120 voltios (CA) |
| Uso interior/exterior | Interior |
| Método de control | Push Button, Touch (via wall switch) |
| Material | Acrylonitrile Butadiene Styrene, Metal, Polycarbonate |
| Compoñentes incluídos | Light Kit, Exhaust Fan |
5. Instalación
IMPORTANTE: Ensure power is disconnected at the service panel before beginning installation.
5.1 Consideracións previas á instalación
- The fan is designed for ceiling mount installation.
- Required ceiling opening size: 9.25 inches (L) x 9.25 inches (W) x 5.9 inches (H).
- The light cover measures 14.28 inches x 14.28 inches.
- Duct diameter required: 4 inches (duct not included).
Figure 1: Exhaust Fan Dimensions. The housing is 9"x9"x5.9", the light cover is 14.28"x14.28", and the duct diameter is 4".
Figure 2: Required Ceiling Opening Size. A 9.25 inch by 9.25 inch opening is needed.
5.2 Instalación paso a paso
- Measure and Cut Ceiling Opening: Measure and cut the ceiling opening to 9.25 inches x 9.25 inches. Ensure the opening is large enough to accommodate the fan housing.
- Place Fan Housing: Insert the fan housing through the existing hole in the ceiling. Bend the four ears to place the fan housing on the ceiling. The fan housing should be level and perpendicular to the joist.
- Mount with Hanger Bars: Engage the hanger bar with the channel on the product's casing. Adjust the hanger bar as necessary to mount the product between the framing. Align the hanger bar tab with the inner side of the framing. Using screws, install the product onto the framing through the holes. Attach the end tab of the hanger bar to the framing with screws. Attach the hanger bar onto the product's casing con parafusos.
- Attach Duct Connector: Attach the duct connector to the fan housing.
- Conecte cables: Connect the fan and house wires through the hole and into the junction box (not included). Use 120VAC house wiring from the wall switch to the fan as shown in the wiring diagram. 14AWG is the smallest conductor that shall be used for branch-circuit wiring. Push the wires back through the hole. Reattach the wiring box cover.
- Instalar conducto: Install a circular 4-inch duct (not included) and secure it with duct tape or clamps (nin incluído). Rematar o traballo do teito. O orificio do teito debe estar aliñado co bordo da carcasa do ventilador.
- Plug Fan and Light: Plug the motor assembly back into the power unit. Plug the LED light into the proper power units respectively as the label indicated.
- Install Light Panel: Attach the LED panel by pinching the mounting springs and inserting them into the narrow rectangular slots in the fan housing. Test the unit.
- Activar: Acende a luz.
Figure 3: Installation Steps 1-3. Shows measuring and cutting the ceiling, placing the fan housing, and mounting with hanger bars.
Figure 4: Installation Steps 4-6. Shows attaching the duct connector, connecting fan and house wires, and installing the duct.
Figure 5: Installation Steps 7-9. Shows plugging in the fan and light, installing the light panel, and switching on the light.
5.3 Opcións de cableado
The fan and light can be wired in two configurations:
- One Switch Control: Both lighting and fan are controlled simultaneously by a single ON/OFF switch.
- Two Switch Control: The lighting and fan are controlled independently by two separate ON/OFF switches.
Figure 6: Wiring Options. Left shows one switch controlling both fan and light. Right shows two switches controlling fan and light separately.
5.4 Special Note for Installation
If access to the ceiling attic is not possible, you can choose a fixed bracket installation method. Put the fan into the open hole, insert the bracket into the guide groove of the fan, extend the bracket to both sides, and then fix it with screws. The purpose of the bracket unfolding is to ensure the safe operation of the fan. Locate the 4 screw holes on the side of the exhaust fan and drive the 4 screws vertically into the solid wood side panel at the ceiling opening and make sure the fan is secured to the side panel to reconfirm firmness.
Figure 7: Alternative Installation Method. Shows how to install the fan using a fixed bracket when attic access is limited.
6. Instrucións de funcionamento
6.1 Funcionamento do ventilador
Once installed and wired, the exhaust fan will operate when the corresponding wall switch is turned ON. The fan provides 130 CFM airflow to effectively remove moisture and odors from your bathroom.
Figure 8: Fan Airflow. The fan draws air upwards to ventilate the room.
Figure 9: Quiet Operation. The fan operates at a low noise level of 1.5 sones.
6.2 Light Operation and Color Temperature Adjustment
The integrated LED light provides 1100 lumens of illumination and offers three selectable color temperatures: 3000K (soft white), 4000K (bright white), and 5000K (daylight).
To change the color temperature, simply toggle the light switch (ON-OFF-ON) quickly. Each quick toggle will cycle through the available color temperatures. The light features a memory function: if the light is turned off for more than 10 seconds, it will automatically save the last selected color temperature and resume that setting when turned back on.
Figure 10: Customizable Lighting. Choose between 3000K, 4000K, and 5000K light settings.
7. Mantemento
Un mantemento regular garante un rendemento óptimo e unha maior lonxevidade do extractor. Desconecte sempre a alimentación no panel de servizo antes de realizar calquera mantemento.
7.1 Cleaning the Light Cover and Fan Grille
- Gently remove the LED light panel by pinching the mounting springs.
- Wipe the light cover and the visible fan grille with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Ensure all parts are completely dry before reattaching the light panel.
7.2 Mantemento do motor
The fan motor is permanently lubricated and requires no additional oiling or maintenance.
8 Solución de problemas
If you experience issues with your exhaust fan, refer to the following troubleshooting guide:
| Problema | Causa posible | Solución |
|---|---|---|
| O ventilador non funciona | No power to the unit; Loose wiring; Motor malfunction. | Check circuit breaker/fuse; Verify wiring connections (consult a qualified electrician); Contact customer support if motor is faulty. |
| A luz non se acende | No power to the unit; Loose wiring; LED panel malfunction. | Check circuit breaker/fuse; Verify wiring connections (consult a qualified electrician); Ensure LED panel is properly plugged in; Contact customer support if LED panel is faulty. |
| Light color temperature does not change | Incorrect toggling of the switch; Faulty switch or LED driver. | Toggle the light switch OFF and ON quickly to cycle through colors; If issue persists, consult a qualified electrician to check the switch and wiring. |
| Fan is excessively noisy | Loose mounting; Obstruction in fan blades; Damaged motor. | Ensure fan housing is securely mounted; Check for debris in the fan blades (with power off); Contact customer support if motor is damaged. |
| Poor ventilation/steam removal | Ductwork obstruction; Improper duct installation; Fan malfunction. | Check ductwork for blockages or kinks; Ensure duct is properly sealed and vented outdoors; Contact customer support if fan performance is low. |
9. Garantía e soporte
Fitop is committed to providing high-quality products. This product is manufactured and certified to meet regional, national, and international industry standards. For any questions, concerns, or warranty claims, please contact Fitop customer support. Please refer to your purchase documentation for specific warranty terms and contact information.