1. Instrucións de seguridade importantes
Lea atentamente todas as instrucións antes de usar este aparello e gárdeas para futuras consultas. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios ou lesións graves.
- Este electrodoméstico está destinado unicamente ao uso doméstico. Non o empregue no exterior nin en superficies molladas.
- Non permita que os nenos manexen o aspirador. É necesaria unha supervisión atenta cando se usa preto de nenos.
- Non colle líquidos inflamables ou combustibles, como gasolina, nin o use en zonas onde poidan estar presentes.
- Non coller nada que arde ou fume, como cigarros, mistos ou cinzas quentes.
- Non o use sen o vaso de po e/ou os filtros colocados.
- Turn off the appliance before connecting or disconnecting the motorized brush head, telescopic tube, or charging adapter.
- Use só o adaptador de carga subministrado polo fabricante.
- Non manipule o adaptador de carga nin o aparello con mans molladas.
- Almacene o aparello nun lugar fresco e seco.
2. Produto rematadoview & Compoñentes
Contido do paquete
- U10U Unit x1
- Adaptador de alimentación x1
- Soporte de parede x1
- Cepillo 2 en 1 x1
- Crevice Tool x1
- Manual de usuario x1
- HEPA Filters x2
Diagrama do produto

Figura 1: Máisview of the Ultenic U10U Cordless Stick Vacuum Cleaner and its included accessories, including the main unit, telescopic tube, floor brush, and various cleaning tools.

Figura 2: detallada view of all individual components of the Ultenic U10U, clearly labeled for identification and assembly.
3. Montaxe
Montaxe paso a paso
- Coloque a batería: Align the battery pack with the main unit's handle and slide it in until it clicks securely into place.
- Conecta o tubo telescópico: Insert the telescopic tube into the main unit's suction port until it locks.
- Fixar o cepillo para o chan: Conecte o cepillo para chans ao outro extremo do tubo telescópico, asegurándose de que oia un clic firme.
- Alternative Handheld Assembly: For handheld use, attach desired accessories (2-in-1 brush or crevice tool) directly to the main unit's suction port.
Cargando a batería
Before first use, fully charge the battery. The battery can be charged while attached to the main unit or separately.
- Conecte o adaptador de alimentación a unha toma de corrente.
- Plug the charging cable into the charging port on the battery pack (either on the main unit or detached).
- The charging indicator lights will illuminate to show charging status. A steady light indicates a full charge.
4. Instrucións de funcionamento
Modos de acendido/apagado e succión
- Encendido/apagado: Prema o botón de acendido da unidade principal para acender ou apagar o aspirador.
- Axustar o modo de succión: Press the 'MODE' button to cycle through the available suction power levels (Low, Mid, Max). The current mode will be displayed on the digital screen.
GreenEyE Technology

Figure 3: The GreenEyE Technology's LED lights on the floor brush highlight hidden dust and debris on various floor types, ensuring thorough cleaning.
The floor brush is equipped with GreenEyE Technology, which uses green LED lights to illuminate dust particles on the floor, making them more visible for effective cleaning. A built-in flashlight also helps to spot dirt in dark corners and under furniture.
Usando anexos

Figure 4: The Ultenic U10U with its versatile attachments, demonstrating its use for cleaning upholstery, tight spaces, and other surfaces.
- Pincel 2 en 1: Use the brush mode for dusting delicate surfaces like keyboards or curtains. Slide the brush back to use the nozzle for upholstery or car interiors.
- Ferramenta de fendas: Ideal for reaching narrow gaps, corners, and tight spaces, such as between sofa cushions or along baseboards.
5. Mantemento
Baleirando o vaso de po
Regularly empty the 1.5L dust cup to maintain optimal suction power.
- Asegúrate de que o aspirador estea apagado.
- Prema o botón de liberación do depósito de po para separalo da unidade principal.
- Hold the dust cup over a trash bin and press the bottom release latch to open and empty its contents.
- Close the latch and reattach the dust cup to the main unit until it clicks.
Limpeza de filtros

Figure 5: The advanced 5-layer filtration system, including stainless steel mesh, multi-cyclone, HEPA 10, and HEPA 11 filters, designed to trap fine dust.
The Ultenic U10U features an advanced 5-layer filtration system, including two HEPA filters. Clean these regularly for best performance.
- Retire o depósito de po como se describe arriba.
- Xire e tire o conxunto do filtro do depósito de po.
- Separate the HEPA filters and the metal mesh filter.
- Tap the filters gently to remove loose dust. For thorough cleaning, rinse the filters under cold running water.
- Ensure all filter components are completely dry before reassembling and placing them back into the vacuum. Allow at least 24 hours for air drying.
Cleaning the Anti-Tangle Brush

Figure 6: The upgraded anti-tangle brush design, preventing hair from wrapping around the roller during operation.
The anti-tangle brush is designed to minimize hair wrap, but occasional cleaning may be necessary.
- Apague o aspirador e retire o cepillo para o chan.
- Locate the release tab on the side of the brush head and open it to remove the brush roller.
- Remove any tangled hair or debris from the brush roller and the brush head cavity. A small cleaning tool (if provided) can assist.
- Reinsert the brush roller and close the release tab until it locks.
6 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O baleiro non se acende | A batería non está cargada ou non está instalada correctamente. | Cargue a batería completamente. Asegúrese de que a batería estea ben encaixada no seu lugar. |
| Baixo poder de succión | Dust cup is full, filters are clogged, or there is a blockage. | Empty the dust cup. Clean or replace filters. Check for blockages in the tube or brush head. |
| Brush roller not rotating | Hair or debris tangled in the brush, or the brush head is blocked. | Clean the brush roller and remove any obstructions. |
| Duración curta da batería | Battery not fully charged, or operating in Max mode continuously. | Ensure battery is fully charged. Use lower suction modes for longer runtime. |
7. Especificacións
| Característica | Especificación |
|---|---|
| Marca | Ulténico |
| Nome do modelo | U10U |
| Característica especial | Spotless Cleaning, Lightweight, Cordless, Self-standing, Rechargeable |
| Tipo de filtro | HEPA Filter (5-layer system) |
| Potencia de succión | 45 kPa |
| Potencia do motor | 500 W |
| Capacidade da copa de po | 1.5 litros |
| Duración da batería | Up to 40 minutes (on low mode) |
| Tempo de carga | 4 horas |
| Nivel de ruído | 60 decibeis |
| Peso do elemento | 4.29 libras |
| Dimensións do produto | 44.49 cm de longo x 10.04 cm de ancho x 8.27 cm de alto |
| Usos recomendados | Hardwood floor cleaning, Pet Hair Removal, Home Cleaning, Car cleaning |
8. Garantía e soporte
The Ultenic U10U Cordless Stick Vacuum Cleaner comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please refer to the warranty card included in your package for full terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact Ultenic customer service through the contact information provided in your user manual or visit the official Ultenic websitio.