DOUBLE E Jeep Licensed 1:14 Scale Pink Remote Control Car Instruction Manual

1. Información importante de seguridade

ADVERTENCIA: RISCO DE ATHOGACION - Pezas pequenas. Non para nenos menores de 3 anos.

• Please remove batteries if the vehicle will not be used for a long time.
• The battery terminals should never be short-circuited.
• The battery should only be charged under adult supervision.
• Never put the batteries near fire or any source of heat; do not place them in water or leave in direct sunlight.
• Non cargue pilas non recargables.
• Dispose of batteries according to local government regulations.
• Do not put the batteries together with daily trash.
• This product shall be charged for four to five hours. The supporting USB charger shall not be used for devices other than this product.
• Please note that rechargeable battery should be fully charged before first use.

Image: Close-up of the product packaging displaying battery warnings and general instructions.

2. Que hai na caixa

Your DOUBLE E Jeep Remote Control Car package includes the following items:

• 1 x Jeep Car (Pink)
• 1 x mando a distancia
• 1 x Rechargeable Battery Pack (for car)
• 1 x cable de carga USB
• 1 x Desaparafusador
• 1 x Manual do produto
• 2 x Sheets of DIY Stickers

Image: The DOUBLE E Jeep RC car, remote control, and two sheets of DIY stickers, indicating the contents of the package.

3. Instrucións de configuración

3.1. Cargar a batería do coche

1. Locate the rechargeable battery pack and the USB charging cable.
2. Conecte a batería ao cable de carga USB.
3. Plug the USB cable into a compatible USB power source (e.g., computer, USB wall adapter).
4. Allow the battery to charge for 4-5 hours for a full charge. The indicator light on the charger will typically change color or turn off when charging is complete.

3.2. Installing Batteries in the Car

1. Using the provided screwdriver, open the battery compartment cover on the underside of the car.
2. Insert the charged rechargeable battery pack, ensuring correct polarity.
3. Peche ben a tapa do compartimento da batería co destornillador.

3.3. Instalación das pilas no mando a distancia

1. Open the battery cover at the bottom of the remote controller.
2. Insert 2 x 1.5V AA batteries, ensuring correct polarity. (AA batteries are not included).
3. Pecha a tapa da batería.

3.4. Applying DIY Stickers

Personalize your Jeep with the included DIY stickers. Carefully peel and apply them to the car's body as desired.

Image: Illustration of the 3.7V rechargeable battery and its connection to a USB charging cable, highlighting the charging process.

4. Instrucións de funcionamento

4.1. Acendido e emparellamento

1. Acenda o interruptor de enerxía do coche.
2. Acenda o interruptor de alimentación do mando a distancia.
3. The indicator light on the remote controller will flash slowly, then stay solid once paired.
4. One remote controller can only match with one car. After successful matching, there is no interference.
5. If the car is idle for 1 minute, it will enter sleeping state (light off of the indicator). Press any key to activate.
6. To re-pair with other cars or remote controllers, turn off the power of both devices and repeat the pairing process.

4.2. Controis básicos

• Adiante/atrás: Use the trigger on the remote control to move the car forward or backward.
• Xiro: Use the steering wheel on the remote control to turn the car left or right.

4.3. Características e rendemento

• Tecnoloxía de 2.4 GHz: Allows multiple cars to be controlled simultaneously without interference, ideal for team play.
• Capacidade todoterreo: Equipped with strong motor drive, non-slip off-road tires, and independent suspension shocks for conquering various terrains.
• Luces LED: Simulated LED headlights automatically illuminate, enhancing the driving experience, especially in low-light conditions.
• Deseño duradeiro: Features crash bumpers and a high-toughness ABS shell for resistance against falls and bumps.

Image: Three girls playing with the pink DOUBLE E Jeep RC car on a sandy beach, demonstrating its off-road capability and 2.4GHz multi-car control.

Image: A child operating the remote control for the pink RC car, with arrows indicating forward, backward, left, and right steering movements.

5. Mantemento

• Limpeza: Wipe the car and remote control with a soft, dry cloth after each use to remove dust and dirt. Avoid using water or harsh chemicals.
• Coidado da batería: Always remove batteries from both the car and the remote control if they will not be used for an extended period. Store batteries in a cool, dry place.
• Almacenamento: Store the car and remote control in a dry environment, away from direct sunlight and extreme temperatures.
• Inspección: Periodically check for any loose parts, damaged wires, or worn tires. Replace or repair as necessary.

6 Solución de problemas

• O coche non responde:
  • Asegúrate de que tanto o coche como o mando a distancia estean acendidos.
  • Check if batteries are correctly installed and fully charged in both devices.
  • Re-pair the remote control with the car by turning both off and then on again.
• Autonomía curta da batería:
  • Ensure the car's rechargeable battery is fully charged (4-5 hours).
  • Replace AA batteries in the remote control if they are depleted.
• Poor performance/control:
  • Asegúrate de estar dentro do alcance efectivo do mando a distancia.
  • Check for any obstructions or debris in the wheels or suspension.
  • Verify that the steering trim on the remote control is properly adjusted.

7. Especificacións

Imaxe: Primeiro plano view of the pink RC car, pointing out its independent suspension shocks, stylish convertible top, simulated LED headlights, high-performance TPR off-road tires, and crash bumpers.

8. Garantía e soporte

For any questions, concerns, or support needs regarding your DOUBLE E Jeep Remote Control Car, please contact the manufacturer directly.

• Fabricante: DOBLE E
• Teléfono: 0754-85701666