Aninerel 11000W 48V Hybrid Solar Inverter User Manual

1. Introdución

This manual provides essential information for the safe and efficient operation of your Aninerel 11000W 48V Hybrid Solar Inverter. This device is designed to convert 48V DC power from solar panels or batteries into 220V/230V AC power, suitable for various household and office applications. It features a built-in 160A MPPT solar controller and supports grid-tie functionality, allowing power to be fed into the mains. Please read this manual thoroughly before installation and use.

Figura 1: Aninerel 11000W 48V Hybrid Solar Inverter with WiFi module.

2. Instrucións de seguridade

Observe sempre as seguintes precaucións de seguridade para reducir o risco de lesións ou danos no inversor:

• A instalación debe ser realizada por persoal cualificado.
• Asegúrate de que todo o cableado teña o tamaño correcto e estea conectado correctamente.
• Non desmonte o inversor. Non hai pezas no seu interior que o usuario poida reparar.
• Manteña o inversor lonxe de materiais inflamables, humidade e luz solar directa.
• Asegúrese de que haxa unha ventilación axeitada arredor do inversor para evitar o sobrequecemento.
• Always disconnect all power sources (PV, battery, AC grid) before performing any maintenance or wiring.

3. Produto rematadoview

3.1 Características principais

• Saída de alta potencia: 11000W hybrid solar inverter, 48V DC to 220V/230V AC.
• Dual MPPT Controllers: Built-in 2 MPPT trackers (160A total charging current) for connecting two independent PV systems, each up to 5500W.
• Battery-Optional Operation: Can operate with or without batteries, powering loads directly from PV or AC grid.
• Saída de onda sinusoidal pura: Ofrece alimentación CA de alta calidade axeitada para electrónica sensible.
• Grid-Tie Capability: Can feed excess solar power into the mains grid.
• Integrated BMS Communication: Supports communication with compatible 48V 200AH/100AH batteries for optimized battery management.
• Protección integral: Includes short circuit, over-current, over-voltage, subvoltage, overload, charging, and over-temperature protection.
• Monitorización en tempo real: LCD display and 3 LED indicators for system status, plus built-in WiFi for mobile app monitoring.
• Flexible Charging & Output Modes: Multiple configurable modes for power priority (PV, grid, battery).

Figura 2: Key specifications including 11000W rated power, 230Vac output, 50/60Hz frequency, 5500W*2 Max. PV array power, 60-500Vdc PV array MPPT voltage range, and 160A Max. charge current.

Figura 3: The inverter features built-in WiFi for real-time monitoring via a mobile application, available on Google Play and App Store.

Figura 4: The inverter provides a pure sine wave output, ensuring high-quality AC power for sensitive devices like computers, refrigerators, TVs, and water heaters.

3.2 Compoñentes e indicadores

Familiarize yourself with the inverter's external components, display, and indicators for proper operation.

Figura 5: Front panel features an LCD display, status indicator, charging indicator, fault indicator, and function buttons (ESC, UP, DOWN, ENTER). The rear panel includes PV1 input, PV2 input, AC input, Main out, Second out, RS485 port, WiFi antenna port, dry contact port, grounding terminal, battery negative/positive outlet holes, and a power on/off switch.

• Pantalla LCD: Shows real-time system data and operating status.
• Indicador de estado: Indicates the inverter's operational status.
• Indicador de carga: Mostra o estado de carga da batería.
• Indicador de falla: Illuminates when an error occurs, often accompanied by an error code on the LCD.
• Botóns de función: Used for navigating menus and configuring settings.
• PV Inputs (PV1, PV2): Conexións para paneis solares.
• Entrada AC: Conexión para a rede eléctrica.
• Main Out / Second Out: AC output connections for loads.
• Terminais da batería: Conexións para o banco de baterías de 48 V.
• Porto de antena WiFi: For wireless monitoring.
• Porto RS485: For communication with external devices, including BMS.
• Porto de contacto seco: Para sinais de control externos.

4. Configuración e instalación

Proper installation is crucial for the inverter's performance and safety. Consult a qualified electrician for installation.

4.1 Localización de montaxe

• Mount the inverter vertically on a solid surface.
• Ensure sufficient clearance (at least 20 cm) around the inverter for proper airflow.
• Evitar a luz solar directa, as altas temperaturas e a humidade elevada.
• The installation environment should be free from corrosive gases and dust.

4.2 Conexións de cableado

Follow the wiring diagram carefully. All connections must be secure and correctly polarized.

Figura 6: Detailed wiring diagram showing connections for solar panels (PV array), utility grid, generator, 48V battery, 230V household load, and 220V household appliances. Note the maximum AC input voltage, AC output power, and maximum PV array power specifications.

• Conexión da matriz fotovoltaica: Connect solar panels to PV1 and PV2 inputs. Ensure the PV array voltage is within the 60-500V DC MPPT range and the open circuit voltage does not exceed 500V DC.
• Conexión da batería: Connect the 48V battery bank to the battery terminals. The inverter is compatible with various battery types including AGM, GEL, FLD, LI, SLD, and USER-defined settings.
• Conexión de entrada de CA: Connect the utility grid or a generator to the AC input.
• Conexión de saída de CA: Connect your household loads to the Main Out and Second Out terminals.
• Conexión a terra: Asegúrese de que o inversor estea debidamente conectado á terra.

Figura 7: The inverter is compatible with multiple battery types, including AGM, GEL, FLD, LI (Lithium), SLD, and user-defined settings, with a maximum battery charging current of 100A (AC + DC).

5. Modos de funcionamento

The Aninerel hybrid inverter offers flexible configuration options for charging and load priority.

5.1 Charging Priority Modes

These settings control how the battery bank is charged from different power sources.

• Prioridade solar: The inverter prioritizes solar power for charging. AC input will only charge the battery bank when solar power is no longer available.
• Solar and AC Input: The inverter will charge the battery bank from both solar and AC power simultaneously.
• Só solar: The inverter will only charge the battery bank from available solar power.

5.2 Load Priority Modes

These settings determine how your appliances receive power.

• PV Output Priority: The inverter will prioritize solar power to supply the loads first. If solar input is not enough, it will compensate from the AC input.
• National Network Output Priority (AC Priority): The inverter will redirect the AC input to power all loads and will only use DC inputs (battery/PV) when AC input power is not available.
• Battery Output Priority (DC Priority): The inverter will prioritize inverting from solar first. If solar is not enough, it will invert from battery power. Only when battery power is low will it switch to AC input.

Figura 8: Visual representation of charging priority (Solar Priority, Solar and AC input, Solar Only) and load priority (Solar Priority, AC Priority, DC Priority) settings, which can be configured via the inverter's display.

6. Mantemento

Un mantemento regular garante a lonxevidade e o rendemento óptimo do seu inversor.

• Limpeza: Limpa periodicamente o exterior do inversor cun pano seco. Asegúrate de que as aberturas de ventilación estean libres de po e residuos.
• Conexións: Comprobe anualmente todas as conexións eléctricas para comprobar se están ben apertadas e se presentan signos de corrosión.
• Ambiente: Asegúrese de que o ambiente de funcionamento se manteña dentro dos rangos de temperatura e humidade especificados.
• Saúde da batería: Se usas baterías, vixía o seu estado e asegúrate de que se manteñan axeitadamente segundo as instrucións do fabricante.

7 Solución de problemas

The inverter's LCD display will show error codes if a fault occurs. Refer to the specific error code in the full product manual (if available) for detailed troubleshooting steps. General troubleshooting tips include:

• Sen enerxía: Check all power connections (PV, battery, AC input). Ensure the power switch is ON.
• Sobrecarga: Reduce the connected load. The inverter has overload protection and may shut down.
• Sobrequecemento: Ensure adequate ventilation. Clean any dust from vents.
• Problemas de batería: Comprobar vol. bateríatage and connections. Ensure battery type settings are correct.
• Problemas coa entrada fotovoltaica: Verify solar panel connections and ensure sufficient sunlight. Check PV array voltage.

If the problem persists after basic troubleshooting, contact Aninerel customer support or a qualified technician.

8. Especificacións

9. Garantía e soporte

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer, Aninerel. Keep your purchase receipt and product model number (ANJ-HHS-11000W-48V-WIFI) readily available when seeking support.