Ergosolid G70 Gas Spring Articulated Monitor Arm Instruction Manual

1. Introdución

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Ergosolid G70 Gas Spring Articulated Monitor Arm. Please read this manual thoroughly before installation and retain it for future reference.

2. Información de seguridade

Observe as seguintes precaucións de seguridade durante a instalación e o uso:

• Asegúrese de que todos os compoñentes estean presentes e intactos antes da instalación. Non o use se falta algunha peza ou se está defectuosa.
• This product contains a high-pressure gas spring. Do not attempt to disassemble the gas spring unit.
• Do not exceed the maximum weight capacity of 12 kg (26.4 lbs) or the specified monitor size range of 22-35 inches.
• Install the monitor arm on a sturdy desk surface capable of supporting the combined weight of the arm and your monitor.
• Tighten all screws securely, but do not overtighten to avoid stripping threads or damaging components.
• Manteña os nenos e as mascotas afastados durante a instalación.

3. Contido do paquete

Verifique que todos os seguintes compoñentes estean incluídos no seu paquete:

• Conxunto do brazo do monitor
• Escritorio Clamp Base
• Base de montaxe con ilhós
• Prato VESA
• Kit de ferraxes (parafusos, arandelas, espazadores)
• Chaves hexagonais para axuste
• Manual de instrucións

4. Compatibilidade

The Ergosolid G70 monitor arm is designed for optimal performance with the following specifications:

• Tamaño do monitor: 22 a 35 polgadas (56 a 89 cm)
• Peso do monitor: 2 a 12 kg (4.4 a 26.4 libras)
• Compatibilidade VESA: 75x75 mm and 100x100 mm

5. Instalación

The monitor arm offers two installation methods: desk clamp and grommet mount.

5.1. Escolle o teu método de montaxe

5.1.1. Escritorio Clamp Instalación

1. Coloque o escritorio clamp da base ata a beira da túa mesa.
2. Apretar o clamp parafuso ata que a base estea fixada firmemente á mesa.
3. Insert the main pole of the monitor arm into the clamp base.

5.1.2. Grommet Mount Installation

1. If your desk has a grommet hole, insert the grommet mount base through the hole.
2. Secure the base from underneath the desk using the provided plate and nut.
3. Insira o poste principal do brazo do monitor na base do ilhó.

5.2. Conexión do monitor

1. Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the VESA plate is oriented correctly (usually with an "UP" indicator).
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
3. Secure the monitor to the arm by tightening the locking screw on the VESA head.

5.3. Xestión de cables

The monitor arm features an integrated cable management system. Route your monitor's power and video cables through the designated channels along the arm to maintain a tidy workspace.

6. Axustes e funcionamento

The Ergosolid G70 monitor arm offers a range of adjustments for optimal ergonomic positioning.

6.1. Axuste da tensión do resorte de gas

The gas spring tension needs to be adjusted to match your monitor's weight for smooth movement. Use the provided hex key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at any desired height without drifting up or down.

6.2. Axuste de altura

Once the gas spring tension is correctly set, you can effortlessly raise or lower your monitor by gently pushing or pulling the monitor to the desired height. The arm allows for a height adjustment range of up to 530 mm.

6.3. Axuste de inclinación

The monitor can be tilted from +85° (upwards) to -30° (downwards) to reduce glare and optimize viewing angles. Simply grasp the monitor and tilt it to your preferred angle.

6.4. Axuste do xiro

The arm allows for a 90° lateral rotation (swivel) to the left and right, enabling you to share your screen or adjust your viewing position easily.

6.5. Rotation (Pivot)

The monitor can be rotated 360° from landscape to portrait orientation without removing it from the arm.

6.6. Retraction/Extension

The articulated arm allows for extension and retraction, providing a maximum reach of 650 mm to position your monitor at the ideal distance from your eyes.

7. Mantemento

To ensure the longevity and optimal performance of your Ergosolid G70 monitor arm, follow these maintenance guidelines:

• Limpeza: Wipe the arm surfaces with a soft, damp pano. Evite produtos de limpeza abrasivos ou solventes que poidan danar o acabado.
• Comprobacións periódicas: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
• Resorte de gas: The gas spring is maintenance-free. Do not attempt to lubricate or disassemble it.

8 Solución de problemas

If you encounter any issues with your monitor arm, refer to the following common problems and solutions:

9. Especificacións

10. Garantía e soporte

For warranty information and customer support, please refer to the official Ergosolid website or contact your retailer. The return policy for this product, if purchased through Amazon, is typically 6 days for refund/replacement, fulfilled by Amazon. Specific warranty terms are provided by the manufacturer.

You can visit the Ergosolid brand store for additional information and support: Ergosolid Brand Store