EOEOTWO 26" Fat Tire Electric Bike Model E01 User Manual

1. Introdución

Thank you for choosing the EOEOTWO 26" Fat Tire Electric Bike, Model E01. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your electric bicycle. Please read this manual thoroughly before your first ride and keep it for future reference.

2. Pautas de seguridade

Always prioritize safety when operating your electric bike. Failure to follow these guidelines may result in serious injury or damage to the bicycle.

• Wear a helmet and appropriate safety gear at all times.
• Familiarízate coas leis e regulamentos de tráfico locais.
• Realice unha inspección previa á condución antes de cada uso, comprobando os freos, os pneumáticos, a batería e todos os elementos de fixación.
• Non conduza baixo a influencia do alcol ou das drogas.
• Evite circular en condicións meteorolóxicas adversas ou por superficies esvaradías.
• Asegúrate de que a batería estea ben bloqueada antes de conducir.
• Do not modify the electrical system or motor.

3. Montaxe e Montaxe

The EOEOTWO E01 electric bike requires some assembly. Follow these steps carefully. It is recommended to have two people for unboxing and initial assembly.

3.1. Desembalaxe e identificación de compoñentes

Carefully open the packaging box and remove the bicycle. Identify all components and accessories. Refer to the video for visual guidance.

Image: The EOEOTWO 26 inch Fat Tire Electric Bike, Model E01, in yellow, fully assembled.

3.2. Instalación do manillar

1. Loosen the four screws from the bicycle stem.
2. Place the handlebar into the stem and adjust the angle of the stem to ensure the handlebar is level.
3. Aperte os catro parafusos con seguridade.

3.3. Instalación da roda dianteira

1. Remove the protective cover from the axle and unscrew the nuts on both sides of the axle.
2. Insert the front wheel into the fork, ensuring the screws on both sides of the axle are engaged in the slots.
3. Tighten the nuts on both sides of the axle.

3.4. Instalación do pedal

1. Identifica os pedais esquerdo (L) e dereito (R).
2. Insert the pedals into the corresponding circular slots on the crank arms.
3. Secure them with a wrench, ensuring they are tightly fastened.

3.5. Fender and Rear Rack Installation

1. Connect the rear fender to its connecting accessories using screws.
2. Move the fender above the rear wheel and align the hole at the connection with the hole on the rear frame.
3. Thread the screw into the hole at the connection and tighten it with a wrench.
4. Repeat similar steps for the front fender, aligning it with the holes on the front frame and headlight, and securing it with screws.

3.6. Instalación e carga da batería

1. The key is used to lock and unlock the battery. The battery can be removed after unlocking.
2. Plug in the charger to charge the battery. The light turns from green to red, indicating the start of charging.
3. After fully charging, place the battery back into the slot and lock it securely.

3.7. Protective Film Removal

Tear off the protective films from the LCD display and gear shifter for clear visibility.

3.8. Axuste do asento

Adjust the seat to the appropriate height for comfortable riding and lock it securely.

4. Instrucións de funcionamento

4.1. Mostrarview

Image: The EOEOTWO E01 LCD display, showing battery level, current speed, pedal assist level, trip mileage, odometer, maximum speed, and average speed.

A pantalla LCD ofrece información en tempo real sobre a túa viaxe:

• Nivel de batería: Indica a carga restante da batería.
• Velocidade: Velocidade actual de condución.
• Nivel do PAS (Sistema de asistencia ao pedaleo): Mostra o nivel actual de asistencia motora.
• VIAXE: Distance traveled on the current trip.
• ODO: Lectura total do odómetro.
• MÁX .: Maximum speed achieved.
• AVG: Velocidade media.

4.2. Speed Gears

Image: Close-up of the 7-speed gear shifter and the rear derailleur system on the EOEOTWO E01.

The E01 features a 7-speed gear system. Use the gear shifter on the handlebar to change gears according to terrain and desired effort. The plus (+) button increases gears, and the minus (-) button decreases gears.

4.3. Modos de conducción

Your EOEOTWO E01 electric bike offers five distinct riding modes:

1. Modo acelerador: Power is obtained by rotating the throttle without using foot pedals. This mode allows for speeds up to 33 MPH.
2. Modo de asistencia de pedal: Provides electric assistance when using the foot pedals. There is no response when simply turning the throttle in this mode. This mode offers assistance up to 30 MPH.
3. Modo normal de bicicleta: Functions like a regular bicycle, ridden solely with pedals and utilizing the 7-speed gears.
4. Modo de refuerzo: Press the button on the right control panel to activate this mode. It allows the ebike to travel at approximately 2 miles/h, making it easy to push uphill or walk alongside.
5. Modo cruceiro: To activate, turn the throttle to the bottom and hold it for about 12 seconds. Release the throttle, and the ebike will maintain that speed.

Image: Visual representation of the five riding modes available on the EOEOTWO E01 electric bike.

5. Mantemento

Regular maintenance ensures the longevity and safe operation of your EOEOTWO E01 electric bike.

5.1. Coidado da batería

• Charge the battery fully after each ride.
• Evite esgotar completamente a batería.
• Store the battery in a cool, dry place when not in use, and charge it periodically if stored for extended periods.
• Use só o cargador proporcionado.

5.2. Mantemento dos pneumáticos

Image: Close-up of the EOEOTWO E01's fat tires, highlighting their robust design and the dual disc brakes.

• Check tire pressure before each ride. Maintain pressure within the recommended range (typically indicated on the tire sidewall).
• Inspeccione os pneumáticos para detectar desgaste, cortes ou obxectos incrustados.

5.3. Sistema de freos

• Regularly check brake levers for proper tension and responsiveness.
• Inspeccione as pastillas de freo para ver se están desgastadas e substitúaas cando sexa necesario.
• Ensure brake cables are free from kinks or damage.

5.4. Chain and Drivetrain

• Manteña a cadea limpa e lubricada para garantir cambios de marcha suaves e evitar a oxidación.
• Check for any loose or damaged chain links.

5.5. Limpeza xeral

Clean your ebike regularly with a damp pano. Evite usar chorros de auga a alta presión directamente sobre os compoñentes eléctricos.

6 Solución de problemas

This section addresses common issues you might encounter with your EOEOTWO E01 electric bike.

Se atopa problemas que non aparecen na lista ou se as solucións suxeridas non resolven o problema, póñase en contacto co servizo de atención ao cliente.

7. Especificacións

8. Garantía

The EOEOTWO 26" Fat Tire Electric Bike Model E01 comes with a 1 ano de garantía limitada. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. The product meets strict U.S. safety standards.

For detailed warranty terms and conditions, please refer to the warranty card included with your product or contact customer support.

9. Atención ao cliente

If you have any questions, require assistance with assembly, operation, maintenance, or troubleshooting, please contact EOEOTWO customer support. You can typically find contact information on the product packaging, the official EOEOTWO websitio web ou a través do seu vendedor.

Please have your model number (E01) and purchase date ready when contacting support.