LINOVISION POE-SWR410UR 8-Port UltraReach PoE Switch User Manual

1. Produto rematadoview

The LINOVISION POE-SWR410UR is an 8-port UltraReach PoE Switch designed for reliable power and data transmission over extended distances. It features 8 10/100Mbps IEEE802.3af/at compliant PoE ports and 2 Gigabit Ethernet uplinks. This switch is equipped with two High PoE+ ports providing 45W output, suitable for power-intensive devices like PTZ cameras. Its remote cloud management capabilities allow for flexible network control.

This manual provides detailed instructions for the installation, operation, and maintenance of your LINOVISION POE-SWR410UR 8-Port UltraReach PoE Switch. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Contido do paquete

Upon opening the package, verify that all the following items are included and in good condition:

• LINOVISION POE-SWR410UR 8-Port UltraReach PoE Switch
• Adaptador de alimentación
• User Manual (Quick Guide)
• Soportes e parafusos de montaxe

Figura 2.1: Contido do paquete

3. Product Interface and Features

The POE-SWR410UR switch features a clear layout of ports and indicators for easy setup and monitoring.

Figure 3.1: Front and Back Panel Interface

Características principais:

• 8 UltraReach PoE Ports: These ports extend PoE and data transmission up to 2,600ft (800 meters). Note that bandwidth will be lowered to 10Mbps after 984ft (300 meters).
• 2 High PoE+ Ports: The first two ports provide 45W High PoE+ output, suitable for powering large PTZ cameras or multi-imager cameras.
• 2 Gigabit Uplink Ports: For high-speed connection to your network backbone.
• Remote Cloud Management: Manage the switch via WEB GUI or RemoteMonit CLOUD, supporting VLAN, QoS, and PoE port management.
• Built-in 130W Power Supply: Integrated power for convenience and reliability.

4. Configuración e instalación

Follow these steps to set up your LINOVISION POE-SWR410UR switch:

1. Desembalar o Switch: Retire con coidado o interruptor e todos os accesorios da embalaxe.
2. Montaxe (opcional): Use the provided mounting brackets and screws to secure the switch to a wall or rack if desired.
3. Conectar enerxía: Connect the power adapter cable to the AC inlet on the back of the switch and then plug it into a standard AC power outlet. Ensure the ground terminal is properly connected for safety.
4. Conectar dispositivos de rede:
   • Connect your IP cameras, PTZ cameras, access points, or VoIP devices to the 8 UltraReach PoE ports (P1-P8).
   • For extended range beyond 984ft (300m) up to 2,600ft (800m), connect a POE-EXT3001LP (sold separately, ASIN: B0CTH7WNPK) at the remote end before the PoE device.
   • Connect your network router or main switch to the Gigabit Uplink ports (Uplink1, Uplink2) using standard Ethernet cables.
5. Encendido: Once all connections are secure, the switch will power on automatically. Observe the LED indicators for status.

Figure 4.1: UltraReach PoE Transmission Diagram

Nota importante:

• The POE-EXT3001LP works only with standard PoE devices. Non-PoE devices cannot be used in UltraReach transmission.
• The first two ports (P1, P2) are High PoE+ ports, providing up to 45W for high-power devices.

Figure 4.2: High PoE+ Output Capability

5. Instrucións de funcionamento

The LINOVISION POE-SWR410UR is a managed switch, offering advanced configuration options through its webinterface gráfica de usuario baseada enWEB GUI) or the RemoteMonit CLOUD platform.

Remote Cloud Management:

Access the switch's management interface to configure various network settings and PoE functions:

• PoE Port On/Off Control: Enable or disable PoE power for individual ports.
• Xestión do orzamento de enerxía: Allocate and monitor the power budget for connected PoE devices.
• Port Priority Settings: Assign priority levels to PoE ports to ensure critical devices receive power first during high demand.
• Configuración de VLAN: Create Virtual Local Area Networks for network segmentation and improved security.
• QoS (calidade de servizo): Priorizar o tráfico de rede para aplicacións ou dispositivos específicos para garantir un rendemento óptimo.
• Límite de velocidade do porto: Configure data transfer rates for individual ports.

Refer to the detailed online documentation or the quick guide for specific instructions on accessing and navigating the WEB GUI or RemoteMonit CLOUD interface.

Figure 5.1: Remote Cloud Management Interface

6. Mantemento

Proper maintenance ensures the longevity and optimal performance of your PoE switch.

• Limpeza: Regularly clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.
• Ventilación: Ensure adequate airflow around the switch. Do not block the ventilation holes. Operate the switch within its specified temperature range.
• Xestión de cables Keep network cables organized and free from kinks or excessive tension to prevent damage and ensure reliable connections.
• Actualizacións de firmware: Periodically check the LINOVISION official websitio para actualizacións de firmware. Manter o firmware actualizado pode mellorar o rendemento, engadir novas funcións e mellorar a seguridade.
• Fonte de alimentación: Use only the provided power adapter. Ensure the power source is stable and within the specified voltagrango.

7 Solución de problemas

If you encounter issues with your POE-SWR410UR switch, refer to the following common troubleshooting steps:

• Sen enerxía:
  • Check if the power adapter is securely connected to the switch and the power outlet.
  • Verifique que a toma de corrente funcione.
  • Ensure the PWR LED indicator on the switch is lit.
• Sen ligazón/actividade nun porto:
  • Ensure the Ethernet cable is properly connected to both the switch port and the connected device.
  • Try a different Ethernet cable to rule out cable failure.
  • Comproba o LED de enlace/actividade do porto específico. Se está apagado, non hai enlace.
  • Comprobe que o dispositivo conectado estea acendido e funcione correctamente.
• No PoE Output:
  • Check the PoE LED indicator for the specific port.
  • Ensure the connected device is a PoE-compatible device (IEEE802.3af/at standard).
  • Verify that the total power budget of the switch (130W) is not exceeded.
  • If using UltraReach PoE, ensure the POE-EXT3001LP is correctly installed and the remote device is PoE-compatible.
  • Access the cloud management interface to ensure PoE is enabled for the port and check power budget settings.
• Problemas de conectividade de rede:
  • Check the uplink connections to your router or main network.
  • If using cloud management, verify network settings like VLAN and QoS configurations.
• Restablecemento do interruptor: If issues persist, you can perform a factory reset by pressing and holding the 'Reset' button on the front panel for approximately 5-10 seconds until the LEDs flash. This will restore default settings.

8. Especificacións

9. Garantía

The LINOVISION POE-SWR410UR PoE Switch comes with a 3-year warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or detailed terms and conditions, please contact LINOVISION customer support or refer to the official product documentation.

10. Apoio

For further assistance, technical support, or product inquiries, please utilize the following resources:

• LINOVISION Official Websitio: Visit the official LINOVISION website for FAQs, updated manuals, and support contact information.
• Atención ao cliente: Contact LINOVISION customer service directly for personalized support.
• Tenda en liña: Tamén podes visitar o LINOVISION Store on Amazon para obter información sobre o produto e os accesorios relacionados.