1. Introdución
Thank you for choosing the Treeligo Portable Propane Water Heater. This device is designed to provide instant hot water for various outdoor activities such as camping, hiking, and cleaning. It features a compact design, a built-in rechargeable battery, and multiple safety protections to ensure a reliable and convenient experience.
Please read this manual thoroughly before operating the water heater to ensure proper use and to prevent potential hazards.
2. Información de seguridade
Your safety is paramount. Always follow these guidelines:
- Só para uso exterior: This water heater is designed for outdoor use in well-ventilated areas. Never operate it indoors or in enclosed spaces due to the risk of carbon monoxide poisoning.
- Seguridade do propano: Ensure all gas connections are secure and leak-free before operation. Use only approved propane cylinders and regulators. Store propane cylinders in a well-ventilated area away from ignition sources.
- Temperatura da auga: The unit can heat water up to 149°F (65°C). Exercise caution to avoid scalding. Always test water temperature before use, especially for children or individuals with sensitive skin.
- Fonte de auga: Use clean water only. Do not use the pump with flammable liquids or corrosive chemicals.
- Carga da batería: Charge the built-in 4500mAh battery using the provided charger. Do not use unapproved chargers. Ensure the battery is fully charged for optimal performance and health.
- 6-in-1 Safety Protection: The unit includes temperature control, windproof protection, pump running dry protection, tilt protection, overheat protection (automatic shut-off at 185°F/85°C), and circuit protection. Do not attempt to bypass or modify these safety features.
- Nenos e animais: Keep children and pets away from the operating water heater.
- Almacenamento: When not in use, disconnect the propane tank and store the unit in a dry, safe place.

Figura 1: Máisview of the 6-in-1 safety protection features.
3. Contido do paquete
Verifica que todos os elementos estean incluídos no teu paquete:
- 1 x Treeligo Portable Water Heater
- 1 x Submersible Pump Assembly (6.5 feet hose)
- 1 x Shower Head Set (5 feet hose)
- 1 x Water Inlet Connection
- 1 regulador de gas
- 1 x Charger (4 feet cable)
- 1 x Manual de usuario

Figure 2: All included components of the Treeligo Portable Water Heater.
4. Instrucións de configuración
Follow these steps to set up your portable water heater:
- Posicionar a unidade: Place the water heater on a stable, level surface in a well-ventilated outdoor area.
- Conectar a entrada de auga: Screw the blue water inlet connection securely into the designated port on the unit.
- Conectar a bomba: Plug the black power cable of the pump into the 'WATER PUMP INTERFACE' port. Connect the pump water hose to the water inlet connection.
- Bomba de mergullo: Place the submersible pump fully into a clean water source (e.g., a bucket or container). Ensure the pump is completely submerged before operation.
- Conectar a mangueira da ducha: Connect the shower hose to the red outlet port on the unit.
- Conectar o regulador de gas: Attach the gas regulator to your propane cylinder, then connect the other end of the regulator to the gas inlet at the back of the water heater. Ensure all gas connections are tight.
- Power On Main Switch: Locate the small black main power switch on the bottom of the machine and turn it to the 'ON' position.
- Power On Display Panel: Tap the power button on the display panel to turn on the unit. Check the battery level on the display. If the battery is low, connect the charger to the 'CHARGING INTERFACE' port on the front of the unit.

Figure 3: Step-by-step visual guide for initial setup.
Video 1: Official Treeligo guide on how to set up and use the outdoor campquentador de auga.
5. Instrucións de funcionamento
Once set up, operate your water heater as follows:
5.1 Panel de control rematadoview

Figure 4: Intelligent Real-Time Display and Control Panel.
- Nivel de batería: Indica a carga restante da batería.
- Temperatura da auga de entrada: Displays the temperature of the incoming water.
- Water Flow Status: Shows if water is flowing.
- Estado da bomba: Indicates if the pump is active.
- Interruptor ON / OFF: Main power button for the display panel.
- Output Water Temperature: Displays the temperature of the heated water.
- Batería Voltage: Mostra o volume actual da bateríatage.
- Burner Status: Indicates if the burner is active.
- Burner Switch: Activates or deactivates the propane burner.
- Interruptor da bomba: Activates or deactivates the water pump.
- Botón de control da temperatura da auga: Adjusts the desired output water temperature (Low to High).
5.2 Arranque do quentador de auga
- Ensure all setup steps are completed and connections are secure.
- Turn on the main power switch on the bottom of the unit.
- Press the ON/OFF switch on the display panel. The unit will automatically enter shower mode, and the showerhead icon will light up.
- Preme o Bomba On/Off button to start the water pump. Water will begin to flow.
- Axustar o Water Temperature Control Knob to your desired temperature. The burner will ignite automatically to heat the water.
- The display will show the inlet and output water temperatures in real-time.
5.3 Adjusting Water Flow Modes
The shower head offers three adjustable water flow modes:
- Jet Stream: A concentrated, powerful stream.
- Modo estándar: A balanced, everyday shower stream.
- Rainfall Mode: A gentle, wide spray.
Rotate the shower head nozzle to switch between these modes.

Figure 5: Three adjustable water flow modes on the shower head.
5.4 Funcionamento e carga da batería
The built-in 4500mAh battery provides up to 100 minutes of continuous use on a full charge. It charges to 80% in 90 minutes and 100% in 3 hours. The unit supports charging while in use. For optimal battery health, always charge to 100% when possible.
6. Mantemento
Regular maintenance ensures the longevity and safe operation of your Treeligo Portable Water Heater:
- Limpeza: After each use, drain any remaining water from the unit and hoses. Wipe down the exterior with a damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Almacenamento: Store the unit in a dry, protected area when not in use. Disconnect the propane tank and ensure all hoses are properly coiled.
- Coidado da batería: If storing for extended periods, charge the battery to approximately 50-70% and recharge every 3-6 months to prevent deep discharge.
- Inspeccionar conexións: Periodically check all water and gas connections for wear, damage, or leaks. Replace any damaged components immediately.
- Invernización: In freezing temperatures, ensure all water is completely drained from the unit and hoses to prevent damage from ice expansion.
7 Solución de problemas
Se tes algún problema, consulta os seguintes problemas e solucións comúns:
Q1: My water pump isn't working at all and isn't pumping any water. What should I do?
A:
- Power Switch Location: The small black switch on the bottom of the machine is the main power switch for the entire device. Ensure it is turned ON.
- Comprobar o nivel da batería: If the indicator light or screen on the control panel does not light up after pressing the power button, the built-in battery is low. Connect the power adapter to charge it first.
- Nota de carga: When the device is out of power, neither the water pump nor the heating function will start. This is the most common reason why the device does not work.

Figure 6: Main power switch and display panel for troubleshooting pump issues.
Q2: I can't tell which port is for charging and which is for power output. What should I do?
A: Refer to the image below for the correct wiring method.
- Plug the water pump's power cord into the port labeled "WATER PUMP INTERFACE."
- Connect the water inlet hose to the threaded fitting labeled "Water Inlet" at the bottom.
Nota importante: Never plug the pump's power cord into the charging port. The charging port is only for charging the device; the pump will not work at all if plugged in there.

Figure 7: Correct port identification for pump and charging.
Q3: I just received the unit, and the pump isn't working when I use it for the first time. Is this normal?
A: Ensure correct connections as follows:
- Plug the power adapter into the 'CHARGING INTERFACE' port on the device to charge.
- The red port labeled "Water output" or "Water pump port" is the power supply port for the water pump; do not plug a charger into it.
Nota importante:
- To charge the device: Plug into the 'CHARGING INTERFACE' on the front.
- To run the water pump: Plug into the 'WATER PUMP INTERFACE' on the side.
- To connect water hoses: Connect the hose to the 'Water output' (out) on the front and the 'Water inlet' (in) on the side.

Figure 8: Correct port usage for charging and pump operation.
Q4: The equipment is powered on and the wiring is correct, but the pump still won't start. What could be the problem?
A:
- Lenda da icona: When the showerhead icon is lit on the display, it indicates that the device is in "Shower Mode." Pressing the Bomba On/Off button at this time will activate the pump to supply water.
- How to turn on shower mode: First, press the power button on the far left to turn on the device. It will automatically enter shower mode, and the showerhead icon will light up. Then press the Bomba On/Off button to start the pump, and you can take a shower as usual.
- Additional tip: If the icon isn't lit, the pump won't start. You can check to see if the mode is set correctly or if the device is plugged in.

Figure 9: Shower mode icon on the display panel.
8. Especificacións
| Característica | Especificación |
|---|---|
| Nome do modelo | GWT000.04 |
| Dimensións do artigo (LxWxH) | 17.32 x 6.69 x 15.35 polgadas |
| Peso do elemento | 19.2 libras |
| Material | Metal |
| Cor | Negro |
| Capacidade da batería | 4500 mAh |
| Max Heating Output | 40,900 BTU |
| Temperatura máxima da auga | Ata 149 °F (65 °C) |
| Continuous Use Time (Battery) | Ata 100 minutos |
| Tempo de carga | 3 hours (80% in 90 minutes) |
| Características de seguridade | Temperature control, Windproof, Pump dry-run protection, Tilt protection, Overheat protection (185°F/85°C auto shut-off), Circuit protection |
| País de Orixe | China |
9. Garantía e soporte
Treeligo products are manufactured to high-quality standards. For warranty information, please refer to the specific warranty card included with your product or contact Treeligo customer support.
For technical assistance, troubleshooting, or to inquire about replacement parts, please visit the official Treeligo store or contact their customer service department. Keep your purchase receipt and model number (GWT000.04) handy when contacting support.
Treeligo Store: Visit the Treeligo Store on Amazon


