1. Información importante de seguridade
Le todas as advertencias de seguridade, instrucións, ilustracións e especificacións que se proporcionan con este produto. O incumprimento de todas as instrucións que se indican a continuación pode producir descargas eléctricas, incendios e/ou lesións graves.
- Protección ocular: Always wear safety glasses when operating the jump starter or air compressor.
- Ventilación: Ensure adequate ventilation when operating in enclosed spaces.
- Spark-Proof Clamps: O intelixente clamps are designed to prevent sparks and reverse polarity. Always connect the red clamp ao terminal positivo (+) e ao cl negroamp ao terminal negativo (-).
- Nenos e animais: Manteña o dispositivo fóra do alcance dos nenos e das mascotas.
- Materiais inflamables: Non o opere preto de líquidos, gases ou po inflamables.
- Temperatura: Do not expose the device to extreme temperatures. Store in a cool, dry place.
- Danos: Do not use the device if it is damaged. Contact customer support for assistance.
- Cargando: Recharge the unit only with the provided USB-C cable.
2. Produto rematadoview
The EAFC 4000A 2-in-1 Car Jump Starter Power Pack with 150PSI Air Compressor is a versatile device designed for roadside emergencies. It combines a powerful jump starter for vehicles with up to 7.0L gas or 5.0L diesel engines and a 150 PSI air compressor for tire inflation.
Contido do paquete:
- 1 x Jump Starter with Air Compressor Unit
- 1 x cable de puente intelixente
- 1 x cable USB-C
- 1 x Waterproof Handbag
- 1 tubo de bomba
- 3 x Boquillas de aire
- 1 x Manual de usuario
Compoñentes do dispositivo:
While specific labels may vary, the unit typically includes:
- Porto de inicio de salto
- Air Hose Connection Port
- Digital Display/Control Panel
- Porto de entrada/saída USB-C
- Luz LED
- Botón de encendido
Image: The EAFC 4000A 2-in-1 Car Jump Starter Power Pack with 150PSI Air Compressor, showing its compact design and various ports.
3. Configuración e carga
Carga inicial:
- Before first use, fully charge the jump starter unit.
- Connect the provided USB-C cable to the unit's USB-C input port.
- Connect the other end of the USB-C cable to a suitable USB power adapter (not included) or a car charger/power bank.
- The digital display will indicate the charging status. Charge until the battery indicator shows full.
It is recommended to fully charge the unit every 3-6 months to maintain battery health, even if not in use.
4. Operating Instructions - Jump Starting a Vehicle
This unit is suitable for jump starting vehicles with up to 7.0L gas or 5.0L diesel engines.
- Preparar o vehículo: Turn off the vehicle's ignition and all accessories (lights, radio, air conditioning). Engage the parking brake.
- Connect Smart Clamps: Insert the smart jumper cable connector into the jump start port on the EAFC unit. Ensure a secure connection.
- Conectar á batería: Conecta o VERMELLO (+) clamp to the positive terminal of the vehicle's battery. Connect the NEGRO (-) clamp to the negative terminal of the vehicle's battery. The smart clamps will indicate a correct connection.
- Arrancar o vehículo: Unha vez que o clamps are correctly connected and the unit indicates readiness, start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds before attempting again. Do not crank for more than 3 seconds per attempt.
- Desconectar Clamps: Unha vez que o vehículo arranque, desconecte inmediatamente NEGRO (-) clamp from the vehicle battery, then disconnect the VERMELLO (+) clamp. Finally, remove the smart jumper cable from the EAFC unit.
Do not leave the unit connected to the vehicle battery for extended periods after the vehicle has started.
5. Operating Instructions - Using the Air Compressor
The built-in 150 PSI air compressor can inflate car, motorcycle, ATV, bicycle tires, and even air mattresses or sports gear using the included nozzles.
- Conectar a mangueira de aire: Screw the pump tube securely into the air hose connection port on the EAFC unit.
- Attach to Tire/Item: Attach the other end of the pump tube to the tire valve stem or the appropriate air nozzle for your item. Ensure a tight seal.
- Acendido e selección de modo: Turn on the EAFC unit. Use the control panel to select one of the four preset inflation modes: Car, Motorcycle, Bike, or Ball. The unit will automatically display the recommended PSI for the selected mode.
- Adjust Pressure (if needed): If a custom pressure is desired, use the +/- buttons on the control panel to set the target PSI.
- Inicio da inflación: Prema o botón de inicio para comezar o inflado. O compresor parará automaticamente unha vez que se alcance a presión preestablecida.
- Desconectar: Once inflation is complete, disconnect the pump tube from the tire valve/item and then from the EAFC unit.
Deixe que o compresor se arrefríe despois dun uso prolongado para evitar o sobreenriquecido.
6. Características adicionais
USB-C Power Bank Function:
The USB-C port can also function as a power bank to charge your electronic devices. Simply connect your device's charging cable to the USB-C port on the EAFC unit.
Luz LED:
The built-in LED light offers multiple modes for convenience and emergencies:
- Modo de lanterna: Ofrece unha iluminación estable.
- Modo estroboscópico: Para sinalizar ou chamar a atención.
- Modo SOS: Emits the international distress signal.
Press the light button repeatedly to cycle through the modes.
7. Mantemento e almacenamento
Limpeza:
Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are free of dust and debris.
Almacenamento:
- Garde a unidade nun lugar fresco e seco, lonxe da luz solar directa e da humidade.
- Keep the unit charged to at least 50% capacity when storing for extended periods. Recharge every 3-6 months.
- Store the unit and accessories in the provided waterproof handbag for protection.
8 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A unidade non se acende. | A batería está esgotada. | Cargue a unidade completamente usando o cable USB-C. |
| Vehicle does not start after jump. | Cl incorrectoamp connection; vehicle battery too low; vehicle engine issue. | Asegurar clamps are correctly connected (red to +, black to -). Check unit's battery level. If still no start, consult a mechanic. |
| O compresor de aire non se infla. | Hose not securely connected; target PSI not set; unit battery low. | Ensure pump tube is tightly screwed in. Verify target PSI is set. Charge the unit. |
| Mensaxe de erro na pantalla. | Overload, overheat, or other internal fault. | Turn off the unit, disconnect, and allow to cool. If error persists, contact customer support. |
9. Especificacións
| Característica | Especificación |
|---|---|
| Marca | EAFC |
| Modelo | JC11 |
| Pico de corrente de saída | 4000A |
| Compatibilidade do motor | Ata 7.0 l de gasolina / 5.0 l de diésel |
| Presión do compresor de aire | 150 PSI |
| Tipo de batería | Nickel Cobalt Manganese Lithium (NMC) |
| Capacidade da batería | 99 Amp Horario |
| Porto de carga | USB-C |
| Peso do elemento | 1.96 libras (aprox. 950 g) |
| Voltage | 12 voltios |
| Dimensións | 8.26 x 4.72 x 3.54 polgadas (21 x 12 x 9 cm) |
10. Garantía e soporte
The EAFC 4000A 2-in-1 Car Jump Starter Power Pack with 150PSI Air Compressor is backed by a 2 ano de garantía.
For technical assistance, warranty claims, or any product-related inquiries, please contact EAFC customer support. 24/7 customer support is available to assist you.
Garde o comprobante de compra para validar a garantía.