SEEIRIR BT-8806 Digital Anemometer User Manual

Introdución

This manual provides comprehensive instructions for the safe and effective use of the SEEIRIR BT-8806 Digital Anemometer. This device is engineered for real-time measurement of wind speed, temperature, and air volume, delivering reliable data with rapid response.

It is suitable for a variety of applications, including air conditioning and ventilation system detection, outdoor sports wind speed monitoring, industrial safety inspections, and meteorological teaching experiments.

Información de seguridade

• Lea este manual detidamente antes de operar o dispositivo.
• Do not attempt to disassemble or modify the anemometer. This may cause damage and void the warranty.
• Keep the device away from water and high humidity to prevent electrical shock or damage.
• Empregue só o tipo de batería especificado e asegúrese de manter a polaridade correcta durante a instalación.
• Evite expoñer o dispositivo a temperaturas extremas ou á luz solar directa durante períodos prolongados.
• Manter fóra do alcance dos nenos.

Contido do paquete

Verifique que todos os elementos que se indican a continuación estean presentes no seu paquete:

• BT-8806 Digital Anemometer
• Mini Compass
• Acollador
• Desaparafusador
• Manual de usuario

Produto rematadoview

Familiarize yourself with the components of your BT-8806 Digital Anemometer:

• Wind Cup Sensor: Located at the top, this rotating sensor measures wind speed.
• Pantalla LCD: Shows real-time readings for wind speed, temperature, and other indicators.
• Botón UNIT: Changes wind speed measurement units.
• Botón MAX/MIN: Cycles through maximum, minimum, and average wind speed readings.
• Power / Backlight Button: Turns the device on/off and activates/deactivates the display backlight.
• Botón °F/°C: Cambia entre as unidades de temperatura Celsius e Fahrenheit.
• Botón HOLD: Freezes the current readings on the display.
• Compartimento de batería: Situado na parte traseira para a instalación da batería.
• Tripod Screw Mount: Located at the bottom for mounting on a tripod.

Configuración

Instalación de baterías

The BT-8806 Anemometer requires batteries for operation. To install:

1. Localiza a tapa do compartimento da batería na parte traseira do dispositivo.
2. Use the included screwdriver to open the battery compartment.
3. Insert the required batteries (not included) according to the polarity markings (+/-) inside the compartment.
4. Peche ben a tapa do compartimento da batería.

Fijación de cordón

Attach the included lanyard to the designated loop on the anemometer for secure handling and to prevent accidental drops.

Montaxe de trípode

For stable, hands-free operation, the device features a standard tripod screw mount at its base. Attach it to a compatible tripod as needed.

Operación

Encendido/apagado

Manteña premido o Poder button (red circle with line) for approximately 2 seconds to turn the device on or off.

Control de retroiluminación

Prema brevemente o Poder button to activate or deactivate the display backlight for improved visibility in low-light conditions.

Wind Speed Measurement

Hold the anemometer so that the wind cup sensor at the top faces the airflow. The current wind speed will be displayed prominently on the LCD.

Changing Wind Speed Units

Preme o UNIDADE button to cycle through the available wind speed units: meters per second (m/s), kilometers per hour (km/h), miles per hour (mph), and Knots.

Medición de temperatura

The current ambient temperature is displayed at the bottom section of the LCD simultaneously with wind speed readings.

Cambio de unidades de temperatura

Preme o °F/°C button to switch the temperature display between Celsius (°C) and Fahrenheit (°F).

MAX/MIN/AVG Function

Preme o MAX/MIN botón para view the maximum, minimum, and average wind speed readings recorded since the device was powered on or the function was reset. Press the button repeatedly to cycle through these modes.

Función de retención de datos

Preme o ATENCIÓN button to freeze the current readings on the display. This is useful for noting down measurements. Press the button again to release the hold and resume real-time measurements.

Mantemento

Limpeza

Wipe the device exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

Almacenamento

When not in use for extended periods, store the anemometer in a cool, dry place. Remove the batteries to prevent leakage and damage to the device.

Resolución de problemas

• O dispositivo non se acende: Check battery installation. Ensure batteries are inserted with correct polarity and are not depleted. Replace batteries if necessary.
• Inaccurate wind speed readings: Ensure the wind cup sensor is unobstructed and rotating freely. Avoid measuring in turbulent or obstructed airflow.
• Display is blank or shows erratic readings: Check battery level. If the issue persists after replacing batteries, contact customer support.
• A retroiluminación non funciona: Ensure the device is powered on. Briefly press the Power button to toggle the backlight.

Especificacións

• Modelo: BT-8806
• Unidades de medida: m/s, km/h, mph, Knots (for wind speed); °C, °F (for temperature)
• Características principais: Real-time wind speed and temperature measurement, MAX/MIN/AVG functions, Data Hold, Backlight, Tripod Screw Mount
• Fonte de enerxía: Pilas (non incluídas)
• Peso do artigo: 14.1 onzas
• Fabricante: SEEIRIR

Garantía e Soporte

For detailed warranty information, technical assistance, or customer support, please refer to the contact details provided with your original purchase documentation or visit the official SEEIRIR websitio.