JONR H2 PRO MAX Wet Dry Vacuum Cleaner User Manual

Introdución

Thank you for choosing the JONR H2 PRO MAX Wet Dry Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read this manual thoroughly before using the product and retain it for future reference.

Instrucións de seguridade importantes

ADVERTENCIA: Para reducir o risco de incendio, descarga eléctrica ou lesións, lea todas as instrucións antes de usar.

• Use sempre o aparello nunha superficie seca e nivelada.
• Non mergullo o aparello en auga ou outros líquidos.
• Manteña o cabelo, a roupa solta, os dedos e todas as partes do corpo lonxe das aberturas e das partes móbiles.
• Use só como se describe neste manual. Empregue só os accesorios recomendados polo fabricante.
• Non o empregue cun cable ou enchufe danados. Se o aparello non funciona como debería, se deixou caer, se danou, se deixou no exterior ou caeu na auga, devólvao a un centro de servizo.
• Non manipule o enchufe ou o aparello coas mans molladas.
• Non coloque ningún obxecto nas aberturas. Non use con ningunha abertura bloqueada; manteña libre de po, pelusa, cabelos e calquera cousa que poida reducir o fluxo de aire.
• Teña especial coidado ao limpar as escaleiras.
• Non o use para recoller líquidos inflamables ou combustibles, como a gasolina, nin o use en áreas onde poidan estar presentes.
• Non coller nada que arde ou fume, como cigarros, mistos ou cinzas quentes.
• Evitar o arranque involuntario. Asegúrese de que o interruptor estea na posición de apagado antes de conectar a batería, coller ou transportar o aparello.
• Recarga só co cargador especificado polo fabricante.
• En condicións abusivas, pódese expulsar líquido da batería; evitar o contacto. Se o contacto ocorre accidentalmente, lave con auga. Se o líquido entra en contacto cos ollos, tamén busque axuda médica.

Contido do paquete

Comprobe que todos os compoñentes estean presentes e en bo estado ao desembalar.

• JONR H2 PRO MAX Main Unit
• Montaxe de asa
• Base de carga
• Adaptador de alimentación
• Cleaning Solution (Starter Bottle)
• Cepillo de limpeza
• Titular de accesorios
• Manual de usuario

Image: JONR H2 PRO MAX Wet Dry Vacuum Cleaner and its included accessories. This image shows the main unit, handle, charging dock, and various cleaning tools.

Diagrama do produto

Familiarize yourself with the parts of your JONR H2 PRO MAX.

1. Tanque de auga limpa (CWT)
2. Depósito de auga sucia (DWT)
3. Botón de liberación de asa
4. Pantalla de visualización
5. Botón de encendido
6. Botón de selección de modo
7. Botón de autolimpeza
8. Brush Roll Cover
9. Rolo de pincel
10. Cargando contactos
11. Base de carga

Image: Labeled diagram illustrating the main parts of the JONR H2 PRO MAX Wet Dry Vacuum Cleaner, including tanks, buttons, and brush roll area.

Configuración

1. Montaxe de asa

1. Insert the handle assembly into the main unit until you hear a click, ensuring it is securely locked.
2. To disassemble, press the handle release button and pull the handle upwards.

2. Cargando a batería

• Place the main unit onto the charging dock, ensuring the charging contacts align.
• Conecta o adaptador de corrente á base de carga e conéctao a unha toma de corrente.
• The display screen will indicate charging status. A full charge takes approximately 4 hours.
• For optimal battery life, fully charge the unit before first use.

Image: The JONR H2 PRO MAX Wet Dry Vacuum Cleaner positioned on its charging dock, with the power adapter connected.

3. Filling the Clean Water Tank (CWT)

• Press the CWT release button and remove the tank.
• Open the tank cap and fill with clean tap water. For enhanced cleaning, add a small amount of JONR cleaning solution (do not exceed the MAX line).
• Close the cap securely and reinsert the CWT into the main unit until it clicks into place.

Instrucións de funcionamento

1. Acendido/apagado

• Press the Power Button to turn the unit on. The display screen will illuminate.
• Press the Power Button again to turn the unit off.

2. Selecting Cleaning Mode

The JONR H2 PRO MAX offers multiple cleaning modes:

• Modo automático: Default mode for general cleaning. The unit automatically adjusts suction and water flow based on floor dirt detection.
• Modo máximo: Ofrece a máxima succión e fluxo de auga para zonas moi sucias.
• Modo de succión: Para aspirar líquidos sen dispensar auga.

Press the Mode Selection Button to cycle through the available cleaning modes. The selected mode will be displayed on the screen.

3. Cleaning Your Floors

• Tilt the main unit back to engage the brush roll and start cleaning.
• Move the unit slowly forward and backward over the desired area.
• The unit will dispense water and cleaning solution, scrub the floor, and vacuum up dirty water simultaneously.
• The display screen provides real-time information such as battery level, current mode, and dirty water tank status.

Image: The JONR H2 PRO MAX Wet Dry Vacuum Cleaner actively cleaning a hard floor surface, demonstrating its wet and dry cleaning capabilities.

Mantemento

Regular maintenance ensures optimal performance and extends the lifespan of your JONR H2 PRO MAX.

1. Emptying and Cleaning the Dirty Water Tank (DWT)

• After each use, or when the DWT full indicator appears, remove the DWT.
• Open the DWT lid and carefully pour out the dirty water.
• Rinse the DWT thoroughly with clean water. Clean the filter inside the DWT if necessary.
• Deixe que o DWT e o filtro sequen completamente ao aire antes de volvelo montar.

2. Función de autolimpeza

• Place the unit on the charging dock. Ensure the CWT has sufficient clean water.
• Press the Self-Cleaning Button. The unit will perform an automatic cleaning cycle for the brush roll and internal pipes.
• After the self-cleaning cycle, empty and clean the DWT.
• The hot air drying function will then activate to dry the brush roll, preventing odors.

Image: The JONR H2 PRO MAX Wet Dry Vacuum Cleaner on its charging dock, with indicators suggesting the self-cleaning cycle is active.

3. Limpeza do rolo de cepillo

• Turn off the unit and remove it from the charging dock.
• Open the brush roll cover.
• Remove the brush roll. Use the provided cleaning brush to remove any hair, debris, or tangled material.
• Enxágüe o rolo de pincel baixo auga corrente.
• Allow the brush roll to air dry completely before reinstalling. Ensure it is properly aligned.

4. Limpeza do filtro

• The filter is located within the DWT. Remove it and rinse under clean water.
• Deixe que o filtro seque completamente ao aire antes de volvelo inserir.
• Replace the filter every 3-6 months, or as needed, for optimal performance.

Resolución de problemas

Consulta esta sección para ver os problemas comúns e as súas solucións.

Especificacións

Garantía e Soporte

JONR products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact JONR customer service.

Please visit the official JONR website or refer to your purchase documentation for specific warranty terms and contact details.

Nota: Garde o recibo de compra como xustificante de compra para reclamacións de garantía.