1. Introdución
This manual provides essential information for the safe and efficient operation of your Anern 5000W 24V Hybrid Solar Inverter, Model AN-FGI-S5000. This all-in-one solar inverter integrates a 5000W pure sine wave inverter, a 160A MPPT solar charge controller, and a battery charger function into a single unit. It is designed for off-grid solar applications, converting 24V DC battery power to 220-240V AC for various loads. Please read this manual thoroughly before installation and use.
Image 1.1: Application Range. This image illustrates various applications for the Anern Hybrid Solar Inverter, including emergency electricity, home appliance power, yacht power, photovoltaic rooftop systems, agricultural electricity, and outdoor camping.
2. Instrucións de seguridade
- Read all instructions and warnings in this manual before installation and operation.
- A instalación debe ser realizada por persoal cualificado de acordo con todos os códigos eléctricos locais.
- Do not disassemble the inverter. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
- Garantir unha ventilación adecuada ao redor do inversor para evitar o sobreenriquecido.
- Connect the inverter only to a battery bank with the specified voltage (24 V CC).
- Always disconnect all power sources (PV, AC grid, battery) before performing any maintenance or wiring.
- Wear appropriate personal protective equipment (PPE), including insulated gloves and eye protection, during installation and maintenance.
- Manteña os nenos lonxe do inversor e das súas conexións.
3. Produto rematadoview
3.1 Características principais
- Deseño todo en un: Combines a 5000W pure sine wave inverter, 160A MPPT solar charge controller, and battery charger.
- Voltage Compatibilidade: 24V DC input to 220-240V AC output, compatible with 50Hz/60Hz.
- Entrada fotovoltaica alta: Maximum PV input power of 9000W, with an operating PV voltage range of 60V DC to 450V DC.
- Saída de CA dual: Features primary and secondary AC outputs for optimized energy management.
- Funcionamento sen batería: Capable of powering loads directly from PV/AC without a connected battery.
- Compatibilidade da batería: Supports various battery types, including lithium and lead-acid (recommended capacity ≥ 200Ah).
- Configuración configurable: LCD display allows configuration of input voltage range, battery charge current, and AC/solar charge priority.
- Protección integral: Includes overload, over-temperature, short-circuit, over-voltage, baixo voltage, over-current, and backfill protection.
- Reinicio automático: Automatically restarts when AC grid power is restored.
Image 3.1: Inverter Overview. This image highlights the key specifications and features of the Anern 5000W Off-Grid Solar Inverter, including its 24V DC to 220/230/240V AC conversion, pure sine wave output, 160A MPPT controller, 9000W max PV input, 450VDC max PV VOC, and 160A max charging current.
3.2 LCD Display and RGB Indicators
The hybrid inverter is equipped with an LCD screen that displays real-time system data and operational status. An RGB light indicator provides visual feedback on the inverter's current mode:
- Branco: Modo de espera
- Vermello: Battery Mode (operating from battery power)
- Azul: City Electric Mode (operating from grid power)
- Rango 0: Photovoltaic Mode (operating from solar power)
4. Configuración e instalación
4.1 Especificacións de cableado
Ensure all wiring is correctly sized and installed according to local electrical codes. The following cable sizes are recommended:
- Cable da batería: 2 AWG / 25 mm²
- Cable de saída de CA: 12 AWG / 4 mm²
- AC Input Cable: 10 AWG / 5.26 mm²
- Photovoltaic (PV) Cable: 10 AWG / 5.26 mm²
4.2 Compatibilidade da batería
The inverter is compatible with various 24V battery types. A minimum battery capacity of 200 Amp-hours is recommended for optimal performance.
Image 4.1: Battery Compatibility. This image shows the Anern Solar Inverter's compatibility with multiple battery types, including AGM, GEL, FLD, SLD, and LiFePO4 batteries.
4.3 Dual AC Output Configuration
The inverter features two AC output terminals: a primary output and a secondary output. Under normal operating conditions, both outputs are active. In scenarios where there is no PV or grid power, and the battery voltage is low, the primary output will shut down, and only the secondary output will remain active to conserve energy. The secondary output can be configured based on voltage, output duration, and battery State of Charge (SOC).
Image 4.2: Single PV Input Dual AC Output. This diagram illustrates the inverter's capability to provide dual AC outputs from a single PV input. It shows how the primary output can power larger appliances like an air conditioner and refrigerator, while the secondary output can power smaller devices like a laptop, especially when the battery is low.
4.4 Example Installation Scenario
Image 4.3: Application Scenarios. This image displays an example installation of multiple Anern inverters and battery units in a wall-mounted setup, demonstrating a typical application scenario for the hybrid solar inverter system.
5. Instrucións de funcionamento
5.1 Secuencia de inicio
Follow these steps to safely start the inverter system:
- Acende o interruptor da batería.
- Inicie o inversor.
- Turn on the photovoltaic (PV) switch.
- Turn on the AC grid switch (if connected).
- Turn on the load switches.
Nota: For electrical appliances with inductive loads (e.g., motors, refrigerators), the startup power requirement can be at least three times their nominal power. Ensure the inverter's capacity can handle these surge loads.
5.2 Secuencia de apagado
To safely shut down the inverter system, follow the startup sequence in reverse order:
- Turn off the load switches.
- Turn off the AC grid switch (if connected).
- Turn off the photovoltaic (PV) switch.
- Apague o inversor.
- Apague o interruptor da batería.
5.3 Axustes configurables
The inverter's LCD display allows configuration of various parameters to optimize performance for specific applications:
- Vol. De entradatagRango: Configurable for home appliances or personal computers.
- Corrente de carga da batería: Adjustable based on battery type and capacity.
- AC/Solar Charge Priority: Configurable to prioritize charging from solar or AC grid.
5.4 Operating Modes for Charging
The inverter supports different charging priority modes to maximize energy efficiency:
- Solar Primeiro: Solar energy is the primary source for charging the battery. Utility power will only charge the battery if solar energy is unavailable.
- Solar e servizos públicos: Both solar energy and utility power will charge the battery simultaneously.
- Only Solar Charging: Solar energy will be the sole charging source, regardless of utility availability.
Image 5.1: Cost-Efficient Energy Management. This image illustrates three operational modes for the inverter: 'Solar First' (solar energy prioritised for charging), 'Solar and Utility' (both sources charge simultaneously), and 'Only Solar Charging' (solar is the exclusive charging source).
5.5 Batteryless Mode
The inverter can operate in a batteryless mode, directly powering loads from photovoltaic (PV) or AC sources without requiring a connected battery. This feature simplifies installation and offers flexibility in certain applications.
Image 5.2: Support Batteryless Mode. This image explains that the inverter can power loads directly from PV or AC sources without a battery, highlighting 'No batteries required', 'Direct photovoltaic supply', and 'Plug and Play' benefits. It also contrasts simple plug-and-play wiring with complex, cumbersome maintenance wiring.
6. Mantemento
Un mantemento regular garante a lonxevidade e o rendemento óptimo do inversor. Desconecte sempre todas as fontes de alimentación antes de realizar calquera mantemento.
- Limpeza: Periodically clean the inverter's exterior with a dry, soft cloth. Ensure ventilation openings are free from dust and debris.
- Conexións: Check all electrical connections regularly for tightness and signs of corrosion. Tighten any loose connections.
- Ambiente: Ensure the inverter is operating within its specified temperature and humidity ranges. Avoid exposure to direct sunlight, moisture, and corrosive substances.
- Inspección da batería: If using batteries, regularly inspect them for any signs of damage, leakage, or swelling. Follow battery manufacturer's maintenance guidelines.
7 Solución de problemas
The inverter is equipped with multi-layered protection features to ensure safe operation. If an issue occurs, the LCD display may show an error code or the RGB indicator may signal a specific status. Refer to the following for common issues:
Image 7.1: Multi-layered Protection. This image highlights the comprehensive 360° protection features of the inverter, including short circuit, overload, under voltage, sobre voltage, over current, over temperature, backfill, and over charge protection.
| Problema | Causa posible | Solución |
|---|---|---|
| Sen potencia de saída | Inverter off, low battery, overload, short circuit | Check power switch, battery voltage, reduce load, check for short circuits. |
| Aviso/apagado de sobrecarga | A carga conectada supera a capacidade do inversor | Reduce the connected load. Ensure inductive loads do not exceed surge capacity. |
| Aviso de sobretemperatura | Insufficient ventilation, high ambient temperature | Ensure proper airflow, clear obstructions, move to a cooler environment if necessary. |
| A batería non se está cargando | PV input issue, AC input issue, battery fault, incorrect settings | Check PV connections, AC input, battery health, and charging priority settings on LCD. |
| O inversor non se acende | No battery connection, battery voltage too low, internal fault | Check battery connections, ensure battery is charged, contact support if issue persists. |
8. Especificacións
| Parámetro | Valor |
|---|---|
| Marca | Anern |
| Número de modelo | AN-FGI-S5000 |
| Potencia nominal | 5000 W |
| Potencia máxima de saída | 12000 W |
| Vol. De entrada CCtage | 24 V |
| Saída CA Voltage | 220-240 V |
| Forma de onda de saída | Pura Sine Wave |
| Frecuencia de saída | 50 Hz / 60 Hz (configurable) |
| Corrente do controlador de carga MPPT | 160 A |
| Potencia máxima de entrada PV | 9000 W |
| Vol. Operativo PVtage Alcance | 60-450 V CC |
| Max No-Load PV Voltage | 500 V DC |
| Capacidade de batería recomendada | ≥ 200 Ah (24V) |
| Usos recomendados | Office, Home, Vehicle |
| País de Orixe | China |
9. Garantía e soporte
Information regarding specific warranty terms and conditions for the Anern 5000W 24V Hybrid Solar Inverter is not available in the provided product details. For warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly through their official channels. Ensure you have your product model number (AN-FGI-S5000) and purchase details ready when contacting support.
10. Vídeos oficiais de produtos
No official seller videos were provided in the product data for this model. Please refer to the manufacturer's websitio web ou canles oficiais para ver os recursos de vídeo dispoñibles.