Introdución
This manual provides essential information for the safe and efficient operation of your Donner DAM1000 10-Channel Analog Audio Mixer. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Keep this manual for future reference.
Información de seguridade
Always observe the following basic precautions to avoid electric shock, short-circuiting, damages, fire, or other hazards.
- Fonte de alimentación: Empregue só o adaptador de corrente especificado. Asegúrese de que o volumetage é o correcto para a túa rexión.
- Conexión a terra: Non derogue o propósito de seguridade do enchufe polarizado ou con conexión a terra.
- Humidade: Do not expose the unit to rain, moisture, or excessive humidity. Do not place containers with liquids on the unit.
- Ventilación: Asegúrese de que haxa unha ventilación axeitada. Non bloquee as aberturas de ventilación.
- Calor: Manteña a unidade lonxe de fontes de calor como radiadores, reixas de calor, estufas ou outros aparellos que produzan calor.
- Cables: Protexa os cables de alimentación de ser pisados ou pinchados.
- Servizo: Non intente atender este produto vostede mesmo. Remita todo o servizo a persoal de servizo cualificado.
- Poder fantasma: When using 48V phantom power, ensure microphones are compatible and connected correctly before activating.
Produto rematadoview
The Donner DAM1000 is a versatile 10-channel analog audio mixer designed for high-fidelity sound reproduction in recording, live streaming, and performance environments. It features premium LAXY-PRE microphone preamps, 48V phantom power, Bluetooth 5.3 connectivity, and a 48kHz/24-bit sample rate for professional-grade audio.
Image: The Donner DAM1000 audio mixer showcasing its key specifications including 48kHz/24bit sample rate, 10-channel input, 105dB signal-to-noise ratio, and 0.01% total harmonic distortion.
Imaxe: Detallada view of the four LAXY-PRE microphone preamps, highlighting their individual +48V phantom power switches and control knobs for gain, low cut, and channel level.
Image: The mixer's interface displaying the four discrete compressor knobs, which allow for precise, individualized dynamic control on each of the main input channels.
Image: A user operating the Donner DAM1000 mixer, with a smartphone displaying Bluetooth 5.3 connection settings, illustrating the mixer's wireless audio input capability.
Configuración
1. Desembalaxe e inspección
Retire con coidado a batedora da súa embalaxe. Inspeccione a unidade para detectar calquera signo de danos que puidesen producirse durante o transporte. Garde a embalaxe para futuros transportes ou almacenamentos.
2. Potencia de conexión
Connect the included power adapter to the 12V DC input on the rear panel of the DAM1000. Secure the connection if a screw-type connector is present. Plug the adapter into a suitable AC power outlet. Ensure the mixer's power switch is in the OFF position before connecting.
3. Connecting Microphones and Instruments
The DAM1000 features 4 LAXY-PRE microphone inputs (XLR/TRS combo jacks) and additional stereo line inputs.
- XLR Microphones: Connect XLR microphones to channels 1-4. If your microphone requires phantom power (e.g., condenser microphones), activate the individual +48V phantom power switch for that channel. Ensure the microphone is connected before activating phantom power.
- Line Instruments: Connect instruments or line-level devices (e.g., keyboards, guitar preamps) to the TRS inputs of channels 1-4 or the stereo line inputs (channels 5/6, 7/8, 9/10).
4. Conexión a un ordenador (USB)
The DAM1000 can connect to a computer via its USB-C port for recording and playback. Use a USB-C cable to connect the mixer to your computer.
- ASIO Driver: For Windows users, install the dedicated ASIO driver from the Donner website for low-latency performance. Mac users typically do not require a separate driver.
- Configuración de software: Select the DAM1000 as your audio input/output device in your Digital Audio Workstation (DAW) or recording software.
Image: A close-up of the rear panel of the Donner DAM1000, illustrating the 12V DC power input and the USB-C port for connecting to a computer for recording and playback.
5. Emparellamento Bluetooth
The DAM1000 supports Bluetooth 5.3 for wireless audio input.
- Activación: Press the Bluetooth button on the mixer. The indicator light will flash, indicating pairing mode.
- Emparejamento de dispositivos: On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available devices and select "Donner DAM1000".
- Conexión: Once paired, the Bluetooth indicator light on the mixer will become solid. You can now stream audio wirelessly to the mixer.
- Desconexión: To disconnect, press and hold the Bluetooth button until the light turns off, or disconnect from your device's Bluetooth settings.
En funcionamento
1. Basic Mixing Controls
Each input channel (1-4) and stereo input (5/6, 7/8, 9/10) features various controls:
- GAÑA: Adjusts the input sensitivity for the connected microphone or instrument. Set this to achieve a strong signal without clipping (indicated by the PEAK LED).
- BAIXO CORTE: Activa un filtro de paso alto para eliminar o estrondo de baixa frecuencia non desexado.
- EQ (alto, medio, baixo): Adjusts the tonal balance of the channel.
- FX: Sends a portion of the channel's signal to the internal digital effects processor.
- NIVEL: Controla o volume xeral do canal na mestura principal.
- PAN (Balance): Positions the channel's sound in the stereo field (left to right).
- MUTO: Silencia a canle.
2. Using Compressors
Channels 1-4 are equipped with independent compressors. The compressor knob adjusts the amount of compression applied to the input signal. Turn the knob clockwise to increase compression, which helps to smooth out dynamic peaks and add sustain. Monitor the PEAK LED to avoid over-compression.
3. Digital Effects (DSP)
The DAM1000 includes 24 types of DSP effects (e.g., reverb, delay). Use the FX section to select and apply effects.
- Botón de programa: Rotates to select different effect programs.
- Botón de parámetros: Adjusts a specific parameter of the selected effect (e.g., decay time for reverb, delay time for delay).
- Nivel FX: Controla o volume xeral do retorno dos efectos na mestura principal.
Imaxe: Unha detallada view of the mixer's EQ and high-pass filter controls for precise tone shaping, alongside the digital signal processing (DSP) section which offers 24 distinct effects.
4. Seguimento
Connect headphones to the PHONES jack for monitoring the main mix. The PHONES LEVEL knob controls the headphone volume. The main output level is controlled by the MAIN MIX fader.
5. Gravación
When connected to a computer via USB, the DAM1000 sends the main stereo mix to your recording software. Ensure your DAW is configured to receive audio from the mixer. Adjust channel levels and the main mix fader to achieve optimal recording levels.
Mantemento
1. Limpeza
Regularly clean the mixer with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the finish and internal components. Keep dust out of faders and knobs.
2. Almacenamento
When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures. If possible, use the original packaging for protection.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen saída de son | Power not connected; Main mix fader down; Channel level down; Mute engaged; Output cables disconnected or faulty. | Check power connection; Raise MAIN MIX fader; Raise channel LEVEL knobs; Disengage MUTE; Check all output cable connections. |
| Sen son dunha canle específica | Channel level down; Mute engaged; GAIN too low; Input cable faulty; Phantom power not activated (for condenser mics). | Raise channel LEVEL; Disengage MUTE; Increase GAIN; Check input cable and source; Activate +48V phantom power if needed. |
| Hum or noise in audio | Ground loop; Faulty cables; Nearby electrical interference; Improper gain staging. | Ensure all equipment is properly grounded; Try different cables; Move mixer away from power sources; Adjust GAIN levels to avoid clipping or excessively low signals. |
| Problemas de conexión Bluetooth | Mixer not in pairing mode; Device too far; Interference; Already connected to another device. | Ensure Bluetooth button is flashing; Move device closer; Avoid other wireless devices; Disconnect from other devices and try pairing again. |
| Severe background noise via USB to PC | Ground loop with PC; USB cable quality; Driver issues; PC power supply noise. | Try a different USB port or cable; Ensure PC is properly grounded; Install/reinstall ASIO driver; Consider a USB isolator if noise persists. |
| Effects not audible | FX knob on channel turned down; FX Level knob turned down; Incorrect effect program selected. | Increase FX knob on desired channel; Increase FX Level knob; Select a different effect program. |
Especificacións
- Modelo: DAM1000
- Número de canles: 10
- Entradas de audio: 10
- Tecnoloxía de conectividade: Bluetooth 5.3, USB
- SampTarifa: 48 kHz / 24 bits
- Relación sinal a ruído (SNR): 105 dB
- Distorsión harmónica total + ruído (THD+N): -80dB (Ultra-low)
- Micrófono Preamps: 4 x LAXY-PRE with 48V Phantom Power
- Compresores: 4 independent channel compressors
- Efectos dixitais: 24 types of DSP effects
- Chasis: Todo metálico
- Dimensións do paquete: 39.2 x 31.8 x 11.6 cm
- Peso: 2.8 kg
- País de orixe: China
Garantía e Soporte
Información da garantía
The Donner DAM1000 comes with a 1 anos de garantía do fabricanteConserva o comprobante de compra para reclamacións de garantía. Esta garantía cobre defectos de materiais e fabricación en condicións normais de uso.
Atención ao cliente
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Donner customer support through their official website or the retailer where the product was purchased. You can often find support contact information on the manufacturer's websitio: www.donnerdeal.com