1. Introdución
Thank you for choosing the POOLEX JETPOWER 120 Full Inverter Pool Heat Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your heat pump. Please read this manual thoroughly before installation and use, and keep it for future reference.
The JETPOWER 120 utilizes advanced Full Inverter technology to provide efficient and quiet heating and cooling for your pool, ensuring optimal water temperature from spring to autumn. Its integrated Wi-Fi connectivity allows for convenient control via a smartphone application.
Imaxe 1.1: Fronte view of the POOLEX JETPOWER 120 Full Inverter Pool Heat Pump, showcasino seu deseño e a súa marca.
2. Información de seguridade
Instrucións de seguridade importantes:
- Lea todas as instrucións antes de usar este aparello.
- Installation must be performed by a qualified professional in accordance with local and national electrical and plumbing codes.
- Ensure the power supply matches the specifications of the heat pump.
- Do not operate the heat pump if any part is damaged or malfunctioning.
- Manteña os nenos e as mascotas lonxe da unidade durante o funcionamento.
- Non bloquee as saídas de aire de entrada nin de escape.
- Always disconnect power before performing any maintenance or repairs.
3. Contido do paquete
Verifica que todos os elementos estean presentes no paquete:
- POOLEX JETPOWER 120 Heat Pump Unit
- Anti-vibration support kit
- PVC connectors Ø 50mm 1'' ½
- Mangueira de descarga de condensados
- Kit de mantemento
- Multi-language user manual (this document)
- Wired control extension (10m)
Image 3.1: Included accessories. From left to right: Heat pump on wooden pallet (for delivery), anti-vibration supports, PVC connectors, winter cover, condensate drain hose, and maintenance kit with manual.
4. Configuración e instalación
Proper installation is crucial for the performance and longevity of your heat pump. Consult a qualified professional for installation.
4.1. Selección do sitio
- Choose a well-ventilated outdoor location, away from direct sunlight and heat sources.
- Ensure sufficient clearance around the unit for proper airflow (refer to the diagram in the full manual for specific distances).
- Place the unit on a stable, level surface, using the provided anti-vibration supports.
4.2. Conexións de fontanería
The heat pump should be installed in the pool's filtration circuit, after the filter and before any chemical treatment systems.
- Connect the pool water inlet to the "IN" port and the outlet to the "OUT" port using the supplied PVC connectors (Ø 50mm 1'' ½).
- Asegúrate de que todas as conexións sexan estancas.
- Install the condensate drain hose to direct condensed water away from the unit's base.
Imaxe 4.1: Lateral view of the heat pump, illustrating the "IN" (inlet) and "OUT" (outlet) water connections. A pressure gauge is visible at the top left.
4.3. Conexións Eléctricas
- Connect the heat pump to a dedicated electrical circuit with appropriate protection (circuit breaker).
- Refer to the specifications section for power requirements.
- Use the wired control extension (10m) to position the LED control panel conveniently.
5. Instrucións de funcionamento
The POOLEX JETPOWER 120 is designed for user-friendly operation with its LED control panel and Wi-Fi connectivity.
5.1. Posta en marcha inicial
- Ensure the pool's filtration system is running and water is circulating through the heat pump.
- Turn on the electrical power to the heat pump.
- The LED control panel will illuminate. Follow the on-screen prompts to set the desired water temperature.
5.2. Full Inverter Technology
The Full Inverter technology allows the heat pump to continuously vary the speed of its compressor and fan. This results in:
- Eficiencia enerxética: Up to 35% energy savings compared to ON/OFF heat pumps by avoiding consumption peaks.
- Funcionamento silencioso: Reduced noise levels, especially when maintaining the set temperature.
- Quecemento rápido: The system can boost capacity for faster temperature increases when needed.
5.3. Reversible Heating/Cooling
The JETPOWER 120 can both heat and cool your pool water. This feature is particularly useful for smaller above-ground pools prone to overheating, which can encourage algae growth.
- Select the desired mode (heating or cooling) via the control panel or smartphone app.
5.4. Conectividade Wi-Fi
Control your heat pump remotely using the dedicated smartphone application. Refer to the separate Wi-Fi setup guide for detailed instructions on connecting your device.
- Download the POOLEX app from your device's app store.
- Follow the in-app instructions to pair your heat pump.
- Monitor and adjust settings from anywhere.
6. Mantemento
Regular maintenance ensures optimal performance and extends the lifespan of your heat pump.
6.1. Comprobacións de rutina
- Limpar a unidade: Periodically clean the exterior of the unit to remove dust and debris. Ensure air intake and exhaust vents are clear.
- Comprobar o fluxo de auga: Ensure adequate water flow through the heat pump. A reduced flow can impact efficiency.
- Drenaxe de condensado: Verify that the condensate drain hose is clear and draining properly.
6.2. Preparación para o inverno
Before winter or when temperatures drop below freezing, it is essential to properly winterize your heat pump:
- Desconecte a fonte de alimentación da unidade.
- Drain all water from the heat pump's plumbing.
- Disconnect the water inlet and outlet pipes.
- Cover the unit with the provided winter cover (or a suitable protective cover) to protect it from harsh weather.
7 Solución de problemas
Esta sección aborda problemas comúns cos que podes atoparte. Para problemas máis complexos, ponte en contacto co servizo de atención ao cliente.
| Problema | Causa posible | Solución |
|---|---|---|
| Heat pump does not start | No power supply; Circuit breaker tripped; Control panel error | Check power connection; Reset circuit breaker; Consult control panel manual for error codes. |
| Quecemento/refrixeración insuficiente | Low water flow; Dirty evaporator coils; Incorrect temperature setting; Ambient temperature too low/high | Check pool pump and filter; Clean coils; Verify settings; Operate within recommended temperature range. |
| Ruído insólito | Loose components; Fan obstruction; Compressor issue | Inspect for loose parts; Clear any obstructions from fan; If compressor issue, contact support. |
| Fuga de auga | Condensation (normal); Loose plumbing connections; Internal leak | Verify if it's condensation (normal during operation); Tighten connections; For internal leaks, contact support. |
8. Especificacións
Technical specifications for the POOLEX JETPOWER 120 heat pump:
| Característica | Especificación |
|---|---|
| Número de modelo | PC-SLP120N/BO |
| Fonte de enerxía | AC |
| Dimensións (L x W x H) | 86.5 x 37.5 x 65.6 cm |
| Peso | 26 kg |
| Volume de piscina recomendado | 45 to 65 m³ |
| COP (26°C Air / 26°C Water) | Ata 16 |
| Refrixerante | R32 |
| Funcionalidade | Calefacción / Refrixeración / Automático |
9. Garantía e soporte
POOLEX is committed to customer satisfaction. For warranty information, please refer to the warranty card included with your product or visit the official POOLEX websitio.
- Atención ao cliente: If you have any questions, require technical assistance, or need to report an issue, please visit the POOLEX websitio ou póñase en contacto co seu distribuidor local.
- Recambios: Information regarding spare parts availability is currently unavailable. Please contact customer support for specific part inquiries.
- Devolucións: This product is eligible for 30-day returns.
Note: The seller "eRobot Piscine" provides 30-day returns and legal guarantees.