Produto rematadoview
The COOSPO BK9 is a versatile bike speed and cadence sensor designed for both indoor and outdoor cycling. It utilizes Bluetooth 5.0 and ANT+ wireless technology to provide accurate, real-time data to compatible cycling computers and applications. This sensor helps cyclists monitor their performance by tracking speed and pedal revolutions per minute (RPM).
The BK9 sensor is IP67 waterproof, ensuring reliable performance in various weather conditions, and features a long battery life of approximately 300 hours.
Contido do paquete
Ao abrir o paquete, comproba que estean presentes todos os compoñentes:
- COOSPO BK9C Cadence Sensor
- COOSPO BK9S Speed Sensor (if purchased as a set)
- Silicone mounting rings
- Field buckle mounts
- Manual de usuario
Image: Contents of the COOSPO BK9 sensor package, including the sensors, mounting accessories, and user manual.
Configuración e instalación
Instalación de baterías
The COOSPO BK9 sensors feature a tool-free battery replacement design. To install or replace the CR2032 coin cell battery:
- Locate the battery cover on the back of the sensor.
- Twist the cover counter-clockwise to open it.
- Insira a pila CR2032 co lado positivo (+) cara arriba.
- Align the cover and twist clockwise to secure it.
Image: Illustration of the tool-free battery replacement mechanism for the COOSPO BK9 sensor, showing how to open and close the battery compartment.
Sensor Mounting (No Magnets Required)
The BK9 sensors do not require magnets for operation, simplifying installation.
Cadence Sensor Installation:
- Attach the cadence sensor to the inside of your bike's crank arm using the provided silicone ring or field buckle. Ensure it is securely fastened and does not interfere with pedaling.
Instalación do sensor de velocidade:
- Attach the speed sensor to the hub of either the front or rear wheel using the provided silicone ring or field buckle. Ensure it is firmly attached and does not obstruct wheel rotation.
- Nota importante: If your bike has a dynamo hub, it is recommended to mount the speed sensor to the spokes near the rim for accurate readings, as dynamo hubs can interfere with hub-mounted sensors.
Image: Visual guide for installing the cadence sensor on the crank arm and the speed sensor on the wheel hub. The image shows the sensor being attached to the crank arm and the wheel hub.
Instrucións de funcionamento
Connecting to Cycling Computers and Apps
The COOSPO BK9 sensors support both Bluetooth 5.0 and ANT+ connectivity, allowing them to pair with a wide range of devices and applications.
- Activar o sensor: Gently shake or rotate the sensor to wake it up. A small LED indicator will flash to confirm it is active.
- Enable Bluetooth/ANT+: Ensure Bluetooth is enabled on your smartphone or ANT+ is active on your cycling computer.
- Open Application/Device: Launch your preferred cycling application (e.g., Rouvy, Peloton, Wahoo, CoospoRide) or turn on your GPS bike computer.
- Pair Sensor: Navigate to the sensor pairing or device connection section within your app or cycling computer settings.
- Seleccionar sensor: The sensor should appear in the list of available devices. Select it to pair. For cadence, it might appear as "BK9C" and for speed, "BK9S".
- Confirmar conexión: Once paired, the app or device will typically display a "connected" status.
Image: Display showing the COOSPO BK9 sensors connected to a smartphone app, illustrating compatibility with various fitness applications like CoospoRide, Rouvy, Peloton, Wahoo, and Zwift.
Image: Diagram illustrating the Bluetooth 5.0 and ANT+ technology of the COOSPO BK9 sensors, showing compatibility with fitness apps, GPS bike computers, and smartwatches.
Image: The COOSPO BK9 sensors displayed alongside two GPS bike computers, demonstrating their compatibility for displaying speed and cadence data.
Once connected, the sensors will transmit real-time speed and cadence data to your device, allowing you to monitor and analyze your cycling performance.
Image: A cyclist on a road bike with a display showing real-time speed and cadence data, highlighting how the COOSPO BK9 sensors improve ride performance tracking.
Mantemento
Limpeza e coidado
The COOSPO BK9 sensors are IP67 waterproof, meaning they are protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. However, to ensure longevity:
- Limpe os sensores con anuncioamp cloth after use, especially after riding in wet or dusty conditions.
- Avoid soaking the sensors in water or cleaning them with high-pressure water jets.
- Non empregue produtos químicos duros nin limpadores abrasivos.
Image: Two COOSPO BK9 sensors being splashed with water, demonstrating their IP67 waterproof rating. Note: Avoid soaking or high-pressure cleaning.
Duración e reposición da batería
The sensors are designed for a long battery life of approximately 300 hours. When the battery is low, the sensor's performance may become inconsistent or it may fail to connect. Replace the CR2032 battery as described in the "Battery Installation" section.
Image: Two COOSPO BK9 sensors with a graphic indicating a 300-hour battery life. This image highlights the extended operational time of the sensors.
Resolución de problemas
- O sensor non se conecta:
- Ensure the sensor battery is not depleted. Replace if necessary.
- Wake up the sensor by shaking or rotating it.
- Verify Bluetooth (for apps) or ANT+ (for cycling computers) is enabled on your device.
- Ensure the sensor is within range of your receiving device.
- Try restarting your smartphone or cycling computer.
- If using a smartphone app, ensure you are pairing within the app itself, not directly through the phone's Bluetooth settings.
- Lecturas de velocidade inexactas:
- If mounted on a dynamo hub, reposition the speed sensor to the spokes near the rim.
- Ensure the sensor is securely mounted and not shifting during rides.
- Wahoo App Connectivity:
- The Wahoo app may not allow pairing of two third-party cycling sensors simultaneously. If you are experiencing issues, try pairing one sensor at a time or use a different compatible application.
- General Connectivity Issues with Smartphone Apps:
Image: A visual guide demonstrating the correct and incorrect methods for connecting the COOSPO BK9 sensor to smartphone applications. The correct method involves pairing within the app, while the incorrect method shows attempting to pair directly via phone settings.
Always connect the sensor directly through the cycling application's pairing menu, not through your phone's general Bluetooth settings. Connecting via phone settings can prevent the app from recognizing the sensor.
Especificacións
| Modelo | BK9 |
| Marca | CooSpo |
| Conectividade | Bluetooth 5.0, ANT+ |
| Measurement Accuracy (Speed) | ± 0.1 km/h |
| Measurement Accuracy (Cadence) | ± 1 rpm |
| Clasificación impermeable | IP67 |
| Tipo de batería | Celda de moeda CR2032 |
| Duración da batería | Aprox. 300 horas |
| Peso do elemento | 0.04 quilogramos |
| Tipo de montaxe | Silicone Ring/Field Buckle |
Información da garantía
The COOSPO BK9 Speed/Cadence Sensor comes with a 12 meses de garantía desde a data de compra. Esta garantía cobre defectos de fabricación e avarías en condicións de uso normal. Non cobre danos causados por mal uso, accidentes, modificacións non autorizadas ou instalación incorrecta.
For warranty claims or service, please contact CooSpo customer support with your proof of purchase.
Atención ao cliente
If you encounter any issues or have questions regarding your COOSPO BK9 Speed/Cadence Sensor that are not addressed in this manual, please visit the official CooSpo websitio web ou póñase en contacto co seu equipo de atención ao cliente para obter axuda.
Podes atopar máis información e recursos de apoio en CooSpo Brand Store on Amazon.
