1. Introdución
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Wiltec Pool Pump, model 65829. This pump is designed for circulating and filtering water in pools ranging from 74 to 110 cubic meters, offering a high flow rate of 18,600 liters per hour and a maximum head of 13 meters. It is compatible with sand filter systems and features an integrated pre-filter for enhanced protection.
Figura 1: Wiltec Pool Pump 18600 L/h in a typical pool setup. This image shows the pump connected to a pool system, highlighting its compact design and connection points.
2. Información de seguridade
Read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.
- Desconecte sempre a bomba da fonte de alimentación antes de realizar calquera mantemento ou limpeza.
- Ensure the electrical installation complies with local regulations and is protected by a Residual Current Device (RCD) with a tripping current not exceeding 30 mA.
- Non faga funcionar a bomba se o cable de alimentación ou a ficha están danados.
- The pump must be installed on a stable, level surface, protected from direct sunlight and adverse weather conditions.
- Ensure adequate ventilation around the pump motor to prevent overheating.
- This pump is designed for fresh water only, with a liquid temperature range of 0-35°C. Do not use with corrosive, flammable, or explosive liquids.
For detailed safety guidelines, please refer to the official Safety Information PDF document: Información de seguridade (PDF)
3. Compoñentes e dimensións do produto
The Wiltec Pool Pump consists of a robust motor, a pump housing with an integrated pre-filter, and inlet/outlet connections. Understanding the dimensions is crucial for proper installation and space planning.
Figura 2: Product Dimensions. This diagram illustrates the pump's overall length (580 mm), width (242 mm), and height (367 mm), along with specific measurements for connections and components.
Os compoñentes clave inclúen:
- Pre-filter Basket: Located at the inlet, designed to capture debris larger than 3.9 mm.
- Motor: 750W copper-wound motor with thermal overload protection.
- Carcasa da bomba: Construción de plástico duradeiro.
- Entrada/Saída: Standard connections for pool hoses.
4. Configuración e instalación
Proper installation is vital for the pump's performance and longevity. It is recommended that installation be performed by a qualified technician.
- Colocación: Position the pump on a firm, level surface as close to the pool as possible to minimize suction lift. Ensure it is below the water level if possible for self-priming.
- Montaxe: Secure the pump to the surface using appropriate fasteners to prevent vibration and movement.
- Conexións de fontanería: Connect the pump's inlet to the pool skimmer/main drain line and the outlet to the sand filter and return lines. Ensure all connections are watertight using thread sealant tape or appropriate gaskets.
- Conexión eléctrica: Connect the pump to a dedicated, properly grounded electrical circuit protected by an RCD. Verify that the power supply voltage matches the pump's requirements (230V, 50Hz).
- Cebado: Before first use, fill the pre-filter housing with water to ensure the pump is primed. This prevents dry running and potential damage.
5. Instrucións de funcionamento
Once installed and primed, the pump is ready for operation.
- Arranque da bomba: Ensure all valves are open and the pre-filter is full of water. Connect the pump to the power supply. The pump will start circulating water.
- Seguimento do rendemento: Observe the water flow and pressure gauge (if installed on your filter system) to ensure optimal operation. The pump is designed for a maximum flow rate of 18,600 L/h and a maximum head of 13 meters.
- Rango de temperatura: The pump is designed to operate with liquid temperatures between 0°C and 35°C. Operating outside this range may damage the pump.
- Parar a bomba: Disconnect the pump from the power supply. Close any necessary valves to prevent water backflow.
Figura 3: Optimal Performance. This image highlights the pump's maximum head of 13 meters and maximum flow rate of 18,600 L/h, along with the recommended liquid temperature range of 0-35°C.
6. Mantemento
Regular maintenance ensures the longevity and efficient operation of your pool pump.
- Limpeza do prefiltro: The integrated pre-filter collects debris such as leaves, twigs, gravel, and hair. Regularly inspect and clean the pre-filter basket to maintain optimal flow and prevent pump strain. To clean, disconnect power, open the pre-filter lid, remove the basket, empty debris, and rinse thoroughly. Reassemble, ensuring the O-ring is properly seated and the lid is securely tightened.
- Inspección de motores: Periodically check the motor for any unusual noises or excessive heat. The copper-wound motor is designed for stable operation and includes thermal overload protection.
- Limpeza xeral: Manteña o exterior da bomba limpo e libre de sucidade e residuos.
- Invernización: In regions with freezing temperatures, drain the pump completely and store it in a dry, frost-free location during the off-season to prevent damage.
Figura 4: Pre-filter Function. This image demonstrates how the pump's pre-filter effectively captures various types of debris, such as leaves, twigs, gravel, and hair, protecting the pump's internal components.
Figura 5: Robust Motor Design. This image provides a view of the pump's copper-wound motor, emphasizing its stable operation and built-in protection against overheating and overload.
7 Solución de problemas
Se tes problemas coa bomba, consulta os seguintes problemas e solucións comúns:
| Problema | Causa posible | Solución |
|---|---|---|
| A bomba non arranca | No power; tripped circuit breaker; motor overload protection activated | Check power supply and connections; reset circuit breaker; allow motor to cool down if overheated. |
| Baixo caudal de auga | Clogged pre-filter basket; air leak in suction line; low water level in pool; clogged impeller | Clean pre-filter basket; check all suction line connections for leaks; ensure adequate pool water level; inspect impeller for blockages. |
| A bomba funciona pero non flúe auga | Pump not primed; air lock; closed valve in suction line | Prime the pump by filling the pre-filter with water; check for and release air locks; ensure all valves are open. |
| Ruído ou vibración inusual | Air in system; debris in impeller; loose mounting | Check for air leaks and prime pump; clean impeller; tighten mounting bolts. |
If problems persist after attempting these solutions, contact a qualified service technician or Wiltec customer support.
8. Especificacións
| Especificación | Valor |
|---|---|
| Fabricante | Wiltec |
| Número de modelo | 65829 |
| Caudal (máx.) | 18,600 l/h |
| Wattage | 750 W |
| Cabeza máxima | 13 metros |
| Volume de piscina recomendado | 74-110 m³ |
| Dimensións do produto (L x W x H) | 58 x 24.7 x 36.7 cm |
| Peso do elemento | 10.25 kg |
| Material | Plástico |
| Cor | Azul, Negro |
| Tipo de potencia | Con cordo |
| Rango de temperatura do líquido | 0-35 °C |
9. Garantía e soporte
Para obter información sobre a garantía, asistencia técnica ou consultas sobre o servizo, póñase en contacto co seu vendedor ou directamente co fabricante. Garde o recibo de compra como proba de compra.
A Certificate of Conformity is available for this product: Certificate of Conformity (PDF)