GOWENIC 13-Inch Rivet Nut Tool Set M3-M12 Instruction Manual

Introdución

This instruction manual provides detailed guidance for the safe and effective use of your GOWENIC 13-inch Rivet Nut Tool Set. This tool is designed for installing rivet nuts (also known as blind rivet nuts or threaded inserts) into various materials, creating a strong, permanent thread for fasteners. Please read this manual thoroughly before operation and retain it for future reference.

Contido do paquete

Verify that all items listed below are present in your kit:

• 1 x GOWENIC 13-inch Rivet Nut Tool
• 7 x Mandrel Rods (M3, M4, M5, M6, M8, M10, M12)
• 7 x Rivet Nut Heads (corresponding to M3, M4, M5, M6, M8, M10, M12)
• 20 x M3 Rivet Nuts
• 20 x M4 Rivet Nuts
• 20 x M5 Rivet Nuts
• 20 x M6 Rivet Nuts
• 10 x M8 Rivet Nuts
• 10 x M10 Rivet Nuts
• 10 x M12 Rivet Nuts
• 1 x Wrench (for mandrel replacement)
• 1 x estuche de almacenamento
• 1 x Manual de instrucións (este documento)

Información de seguridade

Always follow basic safety precautions when using hand tools to reduce the risk of personal injury. Read and understand all instructions before operating this tool.

• Use protección ocular: Use sempre lentes de seguridade homologadas por ANSI ou lentes de seguridade con proteccións laterais.
• Protección para as mans: Use appropriate gloves to protect your hands.
• Manter limpa a zona de traballo: Cluttered work areas and benches invite injuries.
• Mantén os nenos lonxe: Do not let children handle the tool.
• Use a ferramenta correcta: Non forzar a ferramenta ou o accesorio para facer un traballo para o que non foi deseñado.
• Inspeccionar a ferramenta antes do uso: Comprobe se hai desalineamento ou atascamento das pezas móbiles, se hai pezas rotas e calquera outra condición que poida afectar o funcionamento da ferramenta. Se está danada, repáre a ferramenta antes de usala.
• Peza de traballo segura: Always secure the material you are working on to prevent movement during operation.

Setup and Mandrel Replacement

The GOWENIC rivet nut tool allows for quick and easy mandrel and nose end replacement without specialized tools, using the included wrench.

1. Select Correct Mandrel and Rivet Nut Head: Choose the mandrel and corresponding rivet nut head that matches the size of the rivet nut you intend to install (e.g., M6 mandrel for M6 rivet nuts).
2. Remove Existing Mandrel (if applicable):
   • Desenrosque o knurled knob at the front of the tool counter-clockwise to loosen the nose end.
   • Use the provided wrench to unscrew the mandrel rod from the tool.
   • Remove the existing rivet nut head.
3. Install New Mandrel and Rivet Nut Head:
   • Thread the desired rivet nut head onto the front of the tool.
   • Screw the selected mandrel rod into the tool clockwise until it is finger-tight.
   • Apretar o knurled knob clockwise to secure the nose end and mandrel. Ensure it is snug but do not overtighten.

Instrucións de funcionamento

Follow these steps to properly install a rivet nut:

1. Perforación: Drill a hole in the workpiece that matches the diameter of the rivet nut body. Ensure the hole is clean and free of burrs.
2. Thread Rivet Nut: Thread the selected rivet nut onto the mandrel of the tool until it is snug against the nose end.
3. Inserir a porca remachable: Insert the rivet nut into the pre-drilled hole in your workpiece.
4. Operate Tool: Firmly squeeze the handles of the rivet nut tool together. You will feel resistance as the rivet nut deforms and clamps onto the material. Continue squeezing until the rivet nut is fully set and you feel a distinct stop or a slight give.
5. Liberar e eliminar: Once the rivet nut is set, open the handles of the tool. The mandrel will retract, releasing from the now-installed rivet nut. Unscrew the tool from the installed rivet nut by rotating the knurled knob counter-clockwise.
6. Inspeccionar a instalación: Check the installed rivet nut to ensure it is securely fastened and flush with the material surface.

Mantemento

Proper maintenance ensures the longevity and reliable performance of your rivet nut tool.

• Limpeza: Despois de cada uso, limpe a ferramenta cun pano limpo e seco para eliminar o po, os residuos ou as virutas de metal.
• Lubricación: Periodically apply a light machine oil to the pivot points and threaded parts of the tool to ensure smooth operation and prevent rust.
• Almacenamento: Store the tool and all its components in the provided storage case in a dry, clean environment, away from direct sunlight and extreme temperatures.
• Inspección: Regularly inspect mandrels and rivet nut heads for wear or damage. Replace worn components to maintain optimal performance.

Resolución de problemas

Se tes problemas durante o funcionamento, consulta os seguintes problemas e solucións comúns:

Especificacións

Garantía e Soporte

For warranty information or technical support, please refer to the purchase documentation or contact GOWENIC customer service through the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.

For further assistance, you may visit the official GOWENIC store on Amazon: GOWENIC Store