ROCKBROS Bike Tail Light Max (Model Q1MAX) User Manual

1. Introdución

Thank you for choosing the ROCKBROS Bike Tail Light Max. This manual provides essential information for the proper installation, operation, and maintenance of your new bike tail light. Designed for enhanced visibility and safety, this light features smart brake sensing, multiple lighting modes, and a durable, waterproof construction. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

2. Que hai na caixa

Verifica que todos os compoñentes estean presentes no paquete:

• Luz traseira para bicicleta (1 unidade)
• Cable de carga USB (1 unidade)
• Saddle Mount (1 unit)
• Seatpost Strap Mount (1 unit)
• Straps (2 units)
• Cable Ties (4 units)

3. Configuración e instalación

The ROCKBROS Bike Tail Light Max offers versatile mounting options for both seatpost and saddle rail installation. No tools are required for installation.

3.1. Seatpost Installation

1. Select the seatpost strap mount and two straps from the accessories.
2. Choose a suitable position on your bike's seatpost.
3. Secure the seatpost strap mount to the seatpost using the provided straps. Ensure it is tight and stable.
4. Align the tail light with the base, twist it in, and lock it into place until you hear a click.
5. Verify the light is securely attached and facing backward.

Image: Step-by-step guide for installing the tail light on a seatpost using the strap mount.

3.2. Saddle Rail Installation

1. Select the saddle mount and cable ties from the accessories.
2. Place the saddle-rail mount on top of your saddle rails.
3. Wrap the cable ties around the saddle rails and pull them tight to secure the bracket. Trim any excess cable tie length if needed.
4. Align the tail light with the base, twist it in, and lock it into place until you hear a click.
5. Verify the light is securely attached and facing backward.

Image: Step-by-step guide for installing the tail light on saddle rails using the saddle mount and cable ties.

3.3. Guía de vídeo de instalación

4. Instrucións de funcionamento

4.1. Acendido/apagado

Para acender a luz on or apagado, press and hold the power button located on the front of the light for approximately 2 seconds.

4.2. Cambio dos modos de iluminación

Once the light is on, short press the power button to cycle through the 5 available lighting modes:

• Red Normal Flash
• Red/Blue Alternating Flash
• Respiración colorida
• Dual Rapid Strobe
• Steady-On

Image: Illustration of the ROCKBROS Smart Tail Light showcasing its 7-color capability and 5 lighting modes.

4.3. Smart Brake Sensing (Max Exclusive)

The Max model features a smart brake sensing function. When deceleration is detected, the light will automatically switch to high brightness for 2.5 seconds to alert vehicles behind you. This feature enhances safety during sudden stops or braking.

Image: The bike tail light mounted on a bicycle, illustrating the 'Smart Brake Sensing' feature in action.

4.4. Auto Mode (Max Exclusive)

In Auto Mode, the built-in light and vibration sensors manage the light's operation automatically. The light will:

• Enter sleep mode after 30 seconds of stillness or under strong sunlight.
• Wake up automatically upon detecting vibration or low-light conditions (e.g., entering a tunnel, dusk).

This mode conserves battery life while ensuring you remain visible when needed.

4.5. Real-Time Battery Level Indicator

Four blue LED dots on the power button provide a clear indication of the remaining battery level, visible even in daylight. Each dot represents approximately 25% of the battery capacity:

• 4 puntos: 75% - 100% charge
• 3 puntos: 50% - 75% charge
• 2 puntos: 25% - 50% charge
• 1 dot: 0% - 25% charge (recharge soon)

In auto mode, these indicators remain active, allowing you to monitor battery status without interruption.

Image: A visual representation of the battery indicator with four blue LED dots, showing charge levels from 0% to 100%.

5. Instrucións de carga

The ROCKBROS Bike Tail Light Max is equipped with a rechargeable 300mAh battery and a Type-C charging port.

1. Locate the Type-C charging port on the light.
2. Connect the provided USB charging cable to the light's Type-C port.
3. Connect the other end of the USB cable to a standard USB power source (e.g., computer, wall adapter, power bank).
4. The battery indicator LEDs will show charging progress. A full charge typically takes approximately 2 hours.
5. Unha vez cargado por completo, desconecte o cable de carga.

Image: The bike tail light connected to a laptop via a Type-C USB cable, illustrating the charging process and battery indicator.

6. Mantemento e coidados

6.1. Limpeza

Wipe the light's surface with a soft, damp cloth to remove dirt and dust. Avoid using abrasive cleaners or solvents, as these can damage the finish or internal components.

6.2. Resistencia á auga

The light has an IPX5 water resistance rating, protecting it against rain, splashes, and dust. It is not designed for submersion. Avoid prolonged exposure to heavy rain or direct water jets.

Image: The bike tail light covered in water droplets, demonstrating its all-weather waterproof design.

6.3. Almacenamento

When not in use for extended periods, store the light in a cool, dry place. Ensure the battery is partially charged (around 50%) before storage to prolong its lifespan. Recharge every 3-6 months if stored for a long time.

6.4. Durabilidade

The light features a premium aluminum alloy construction, making it lightweight, scratch-resistant, and sturdy against drops and impacts.

7 Solución de problemas

• A luz non se acende: Ensure the battery is charged. Connect the light to a power source using the USB cable. If the issue persists, try resetting the light by holding the power button for 10 seconds.
• Light not responding to button presses: The battery might be critically low or depleted. Charge the light. If fully charged, attempt a reset as described above.
• Smart Brake Sensing or Auto Mode not working: Ensure the light is securely mounted and not obstructed. Clean any dirt or debris from the sensors. Verify the light is in Auto Mode if you expect automatic operation.
• Autonomía curta da batería: Check the selected lighting mode; brighter or constantly-on modes consume more power. Ensure the light is fully charged before each use. Battery performance can decrease in extremely cold temperatures.

8. Especificacións

9. Información da garantía

This ROCKBROS Bike Tail Light Max (Model Q1MAX) comes with a 1 ano de garantía do fabricante desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso normal. Non cobre danos causados ​​por mal uso, accidentes, modificacións non autorizadas ou desgaste normal. Conserve o comprobante de compra para reclamacións de garantía.

10. Atención ao cliente

For any questions, technical assistance, or warranty claims regarding your ROCKBROS Bike Tail Light Max, please contact ROCKBROS customer support through the retailer where the product was purchased or visit the official ROCKBROS websitio para información de contacto.