LBSA (Lithium Batteries SA) manufactures high-performance Lithium Iron Phosphate (LiFePO4) battery packs and energy storage solutions for residential and commercial solar applications.
LBSA (Lithium Batteries SA) is a premier manufacturer of energy storage solutions, specializing in Fosfato de ferro de litio (LiFePO4) technology. Designed for durability and efficiency, LBSA battery packs are engineered to meet the demands of residential solar systems and commercial backup power reliability.
Key products include 48V and 51.2V smart batteries featuring intelligent Battery Management Systems (BMS). These systems monitor health, manage charging cycles, and ensure safety through protection against over-current and temperature extremes. LBSA batteries are compatible with a wide range of inverters, including Victron, Goodwe, and Sunsynk, making them a versatile choice for modern energy independence.
Manuais máis recentes de manuals+ elaborado para esta marca.
Preguntas frecuentes sobre manuais, rexistro e asistencia técnica para esta marca.
LBSA batteries utilize CANbus communication and are compatible with major inverter brands including Victron, Growatt, Goodwe, Sunsynk, and Deye.
Most LBSA battery packs feature a RESET button. Hold the button for approximately 2 seconds to turn the battery pack on or restart the BMS.
The DIP switches (ADS Switch) are used to set the battery address for communication between the battery and the inverter, or between parallel battery packs. Refer to the specific user manual table for the correct High/Low (ON/OFF) configuration based on the number of packs connected.
A solid red ALARM light indicates the battery has entered protection mode due to a critical fault, such as abnormal temperature, over-current, or a short circuit. Disconnect the load and check the system immediately.
If storing the battery for a long period, ensure it is charged to at least 90% SOC. It is recommended to recharge the battery every six months to maintain cell health.