VEVOR C110 TPMS RV Tire Pressure Monitoring System

Información do produto

Especificacións

• Modelo: C110
• Voltage: DC 12 V
• Potencia: 0.03 W
• Test The Tire Pressure Range (Bar): 0.5-6
• Peso neto: 0.1 kg

Instrucións de uso do produto

Características

1. Monitor the pressure and temperature of your tyres
2. Modo de sono intelixente para aforro de enerxía

Estrutura

The product consists of a wrench, nut, sensor, and host.

Parameter Setting Reference

1. Before using the product, charge the display for 3-4 hours with the cigarette plug charger.
2. Configuración de parámetros predeterminados de fábrica:
   • Hl pressure alarm data: 3.0 Bar (0.6-6.0 Bar range)
   • Low-pressure alarm data: 2.0 Bar (0.5-5.9 Bar range)
   • Hl temperature alarm data: 68 (intervalo 50-99)
   • Nota: 1 Bar = 14.5 Psi

Instrución de operación

1. When the ACC is ON, the display will enter self-test mode for 2 seconds.
2. When the speed reaches 20 kilometers per hour, the sensor will activate and start detecting and sending pressure and temperature data.
3. Alarming instructions:
   • a) Over-pressure or leakage will trigger a warning.
   • b) High temperature will trigger an alarm with corresponding icons and sounds.
   • c) A low sensor battery will trigger a warning with icons and sounds.

INTRODUCIÓN

• Seguimos comprometidos en ofrecerche ferramentas a prezos competitivos.
• "Aforra a metade", "a metade de prezo" ou calquera outra expresión similar que empreguemos só representa unha estimación do aforro que poderías obter ao mercar determinadas ferramentas connosco en comparación coas principais marcas e non significa necesariamente que abarque todas as categorías de ferramentas que ofrecemos. Lembramos que comprobes coidadosamente, ao facer un pedido connosco, se realmente estás aforrando a metade en comparación coas principais marcas.
• Estas son as instrucións orixinais. Lea atentamente todas as instrucións do manual antes de utilizalo. VEVOR resérvase unha interpretación clara do noso manual de usuario.
• The appearance of the product shall be subject to the product you received. Please forgive us for not informing you again if there are any technological or software updates on our product.

LISTA DE PARÁMETROS

Modelo	C110
Voltage	DC 12 V
Poder	0.03 W
Test The Tire Pressure Range (Bar)	0.5-6
Peso neto (kg)	0.1

LISTA DE PARTES

FUNCIONAMENTO

CARACTERÍSTICAS

1. Monitor the pressure and temperature of your tyres
2. Modo de sono intelixente para aforro de enerxía
3. Tyre leaking warning
4. Visual and audible warning for abnormal tyre pressure and temperature
5. Displays up to 4 tyre temperatures and pressures at a glance
6. Can be set to Fixed Bar or PSI
7. Can be set to °C or °F temperature

Estrutura

1. Unidade de presión
2. Unidade de temperatura
3. Datos de presión
4. Datos de temperatura
5. Sensor battery indicator
6. Sinais de advertencia
7. Vol. De entradatage
8. SET”Button
9. (+) Botón
10. Porto USB

REFERENCIA DE CONFIGURACIÓN DE PARÁMETROS

1. Before using this product, please press any button on the display to turn it on, and charge the display for 3-4 hours with the cigarette plug charger.
2. Configuración de parámetros predeterminados de fábrica
   

   Configuración predeterminada de fábrica	Rango de configuración de parámetros
   Hl pressure alarm data: 3.0Bar	0.6-6.0 bar
   low-pressure alarm data:2.0Bar	0.5-5.9 bar
   Hl temperature alarm data: 68℃	50-99 ℃

3. 1Bar=14.5Psi

INSTRUCCIÓN DE FUNCIONAMENTO

1. When the ACC is ON, the display will get into self-test mode for 2 seconds. After 2 seconds, all icons will be displayed on the LCD screen and ready to receive the new data. When the ACC is OFF, the display will be OFF.
2. When the speed is up to 20 kilometers per hour, the sensor will be activated, and start to detect and send the Pressure and temperature data.
3. Alarming instruction
   • a) When tyre pressure is over the set range or the tyre is leaking, the corresponding tyre position icon, pressure data, and the alarm icon (!) will flash together, and the built-in buzzer will chirp as: Bi Bi ·.
   • Nota: Press any button can stop the buzzer, but all corresponding icons still flash, buzzer will chirp once per minute.
   • b) When tyre temperature is over the set data, the according tyre position icontemperature data, and high temperature alarm icon (!) will flash together, and the built-in buzzer will chirp as: Bi Bi.
   • c) When the sensor battery is low, the icon * of the corresponding tyre position, the sensor’s low battery icon will flash together, and the built-in buzzer will chirp as: Bi Bi.
   • Nota: To stop the buzzer, press the set buzzer.
   • Nota: all icons will still flash, buzzer will “Chirp” once per minute.

ESTADO DE ALARMA

Leaking or low tyre pressure alarm

• Ex.: L.R. tyre leaking or low tyre pressure alarm. The corresponding tyre position icon, pressure data, and the alarm icon (!) will flash together.

High tyre pressure alarm

• Definir intervalo: 1.7~3. 4Bar Ex.: L.R. tyre high-pressure alarm. The corresponding tyre position icon , pressure data, and the alarm icons (!) will flash together.

High tyre temperature alarm

• Configuración predeterminada de fábrica: 70°C. E.g.: L. R. tyre high temperature alarm. Temperature data and high high-temperature alarm icon (!) will flash together.

Sensor de batería baixa

• Sensor battery normal life: 3-5 years. E.g.: L.R. Tyre high temperature alarm. The tyre position icon sensor low battery icon parpadearán xuntos.

Sensor not work

• Ex.: L.R. tire sensor does not work for the corresponding tyre position icon , pressure data, and the temperature will disappear together

WORK PARAMETER SETTING OPERATION

1. Entra e sae do modo de configuración:
   • Press the “ SET ” button and hold on for 3 seconds, release the button after hearing 1 long chirp, the monitoring system will enter the setting mode. Press the “ SET ” button short time to recycle among the following settings: Bar-Psi, C >F, pressure Hl, pressure LO, alarm temperature HI. Press the (+) button to adjust the corresponding data. After finishing all settings, press the “ SET ” button and hold on for 3 seconds.
   • After hearing l short chirp, the system saves all set parameters and quits the setting mode.
   • (Nota: After entering the setting mode, if there is no operation within 3 minutes, the system will quit the mode and back to normal working mode automatically)
2. Tyre pressure HI setting:
   • Press and hold the “ SET ” button for 3 seconds, release the button after hearing 1 long chirp, will enter the setting mode.
   • Then press the (+) button one by one to get into tyre pressure HI setting mode. The pressure HI data flash, press the (+) button to adjust the data, then press the “ SET ” button and hold on for 3 seconds, release the button after hearing a short chirp, the system saves the set data and quit the mode.
   • (Nota: the set pressure HI data must be higher than the set pressure LO data. Pressure HI adjustable range: 0.6-6.0 Bar. Factory default setting: 3.0Bar)
3. Tyre pressure LO setting: Press and hold on the (+) button for 3 seconds.
   • Release the button after hearing a long chirp; the system enters the setting mode. Then press the “ SET ” button one by one to enter into tyre pressure LO setting status. The pressure LO data will flash press the (+) button to adjust the data, then press the “ SET ” button and hold for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode.
   • (Nota: the set pressure LO data must be lower than the set pressure HI data. Pressure LO adjustable range: 0.5-5.9 Bar, Factory default setting: 2.0Bar)
4. Release the button after hearing the long chirp, and the system enters the setting mode.
   • Then press the (+) button one by one to get into alarm temperature HI setting status, the icon will flash, press the RIGHT button to adjust the data, then press the button and hold on for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode.
   • (Nota: temperature HI adjustable range: 50 ℃ – 99 ℃ Factory default setting: 68 ℃ )
5. Configuración da unidade de presión: Press and hold on the (+) button for 3 seconds, release the button after hearing a long chirp. The system enters pressure unit setting mode. The Bar icon will flash, press the (+) button to adjust the unit, then press the set button and hold on for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode. (Factory default setting: Bar)
6. Configuración da unidade de temperatura: Press and hold the (+) button for 3 seconds, release the button after hearing a long chirp, and the system enters the setting mode. Then press the (+) button one by one to get into the temperature unit setting status. The C icon will flash. Press the button to adjust the data, then press the button and hold on for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode.
7. Tyre pressure code matching Long press the (+) button for 3 seconds and release it after hearing a long “Bi” to enter the tyre pressure code matching mode, the left front wheel icon and “_.” fash press the “ SET ” button to select the tyre to be matched, and the corresponding tyre after selection “_.” will flashing, at this time, inflate the corresponding tyre (The external sensor is directly screwed to the valve), after receiving the signal “_.” changes to the pressure value to indicate that the matching is successful, then short press the (+) button to jump to the next tyre. Follow the previous step to match other tyres. After matching, press and hold the (+) button for 3 seconds, save and exit. After a “Bi” (Entering the tyre matching mode without any action, the matching mode will automatically exit after 3 minutes)
   • (Nota: The sensor and receiver have been matched before leaving the factory, and the sensor or receiver needs to be re-matched to change the sensor or receiver.)

INTERNAL SENSOR INSTALLATION

1. Jack up the car and remove the tire.
2. Remove the original valve.
3. Tighten up screw
4. Install the tire from the left side of the valve clockwise direction, avoiding the tire bead from hitting the valve and sensor.
5. Montaxe do sensor
6. Tighten the valve by wrench and screw it (Torque value must be ≥ 4Nm)
7. Equilibra o pneumático.
8. Mount the tire in its position.

Instalación do sensor externo

1. Desenrosque a tapa da válvula.
2. Atornille a porca.
3. Screw in the sensor.
4. Lock the sensor with an anti-theft wrench.

Movement / Replacement of battery

1. Peel off the non-slip gasket
2. Unscrew the sensor with a wrench

Información da FCC

Este dispositivo cumpre coa Parte 15 das normas da FCC. O funcionamento está suxeito ás dúas condicións seguintes.

1. Este produto pode causar interferencias prexudiciais.
2. Este produto debe aceptar calquera interferencia recibida, incluídas as que poidan causar un funcionamento non desexado.

PRECAUCIÓN: Os cambios ou modificacións non aprobados expresamente pola parte responsable do cumprimento poderían anular a autoridade do usuario para utilizar o equipo.
AVISO: Cambios ou modificacións deste produto non aprobados expresamente pola parte. O responsable do cumprimento podería anular a autoridade do usuario para utilizar o produto.
Nota: Este produto foi probado e comprobouse que cumpre cos límites para un dispositivo dixital de Clase B segundo a Parte 15 das Normas da FCC. Estes límites están deseñados para proporcionar unha protección razoable contra interferencias daniñas nunha instalación residencial.
Este produto xera, usa e pode irradiar enerxía de radiofrecuencia e, se non se instala e usa segundo as instrucións, pode causar interferencias prexudiciais nas comunicacións por radio. Non obstante, non hai garantía de que non se produzan interferencias nunha instalación en particular. Se este produto causa interferencias prexudiciais na recepción de radio ou televisión, o que se pode determinar apagando e acendendo o produto, recoméndase ao usuario que intente corrixir as interferencias mediante unha ou máis das seguintes medidas.

• Reorienta ou reubica a antena receptora.
• Aumenta a distancia entre o produto e o receptor.
• Conecte o produto a unha toma dun circuíto diferente ao que está conectado o receptor.
• Consulte ao distribuidor ou a un técnico experimentado de radio/TV para obter asistencia.

ELIMINACIÓN CORRECTA

• Este produto está suxeito ás disposicións da Directiva europea 2012/19/UE. O símbolo que mostra un colector de lixo con rodas tachado indica que o produto require recollida selectiva de lixo na Unión Europea.
• This applies to the product and all marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling of electrical and electronic device accessories

ATENCIÓN AO CLIENTE

• Fabricante: Shanghaimuxinmuyeyouxiangongsi
• Enderezo: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.
• Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
• Importado a Estados Unidos: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
• YH CONSULTING LIMITADO.
• C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
• E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.

Certificado de garantía

• Soporte técnico e certificado de garantía electrónica www.vevor.com/support

Preguntas frecuentes

How do I stop the buzzer alarm?

To stop the buzzer, press the set buzzer; please note that all icons will still flash, and the buzzer will chirp once per minute.

Documentos/Recursos

VEVOR C110 TPMS RV Tire Pressure Monitoring System [pdfManual de instrucións C110, C110 TPMS RV Tire Pressure Monitoring System, TPMS RV Tire Pressure Monitoring System, Tire Pressure Monitoring System, Pressure Monitoring System, Monitoring System

Referencias

• Manual de usuario