Huepar LP36A 12 Ft./3.7m Laser Tripod Telescoping Pole Instruction Manual

Introdución

The Huepar LP36A Laser Tripod Telescoping Pole is a versatile and essential tool designed to assist with precise leveling tasks using line or rotary lasers. Constructed from durable aluminum with a polyurethane coating, this multi-purpose support rod offers stability and ease of use for various applications, from leveling structures to preparing job sites. Its adjustable design allows for placement at any desired height between the floor and ceiling, making it an indispensable accessory for professionals and DIY enthusiasts alike.

Contido do paquete

Verifique que todos os elementos que se indican a continuación estean incluídos no seu paquete:

• 4 x Telescopic Rod Sections
• 1 x Tail Rod (with Spring-Loaded Base, Arbitrary Telescopic Rod Section, and Floor Skid Face)
• 1 x Top Ceiling Skid Plate
• 1 x Height Adjustable Bracket (with 1/4"-20 Male Thread)
• 1 x 5/8"-11 Screw Adapter
• 1 x Adjustable Stable Tripod
• 1 x Soft Carry Bag

Especificacións

Montaxe e configuración

1. Montar as seccións de poste: Connect the four telescopic rod sections together. Ensure they are securely fastened.
2. Attach the Tail Rod: Connect the tail rod, which includes the spring-loaded base and floor skid face, to the bottom of the assembled telescopic rod sections.
3. Attach the Top Ceiling Skid Plate: Secure the top ceiling skid plate to the uppermost end of the pole.
4. Fixar o trípode: Connect the adjustable stable tripod to the base of the pole. The tripod's two-section legs can be adjusted from 48cm to 84cm (18.89-33.07") to suit your needs. A small bubble level embedded in the tripod head helps ensure accurate setup.
5. Mount the Adjustable Bracket: Slide the height-adjustable bracket onto the pole. This bracket can be positioned at any desired height.
6. Asegure o soporte: Use o parafuso clamp on the side of the bracket to stabilize it and prevent shifting.
7. Attach Laser Level: The bracket features a 1/4"-20 male thread. If your laser level requires a 5/8"-11 thread, use the included screw adapter.

Instrucións de funcionamento

1. Positioning the Pole: Place the spring-loaded base of the tail rod on the floor and extend the pole upwards until the top ceiling skid plate makes firm contact with the ceiling. The 1cm powerful spring provides a stable and secure fit.
2. Axuste da altura do pau: The pole can reach a maximum height of 3.7m (12.18ft) when all sections are fully assembled. The arbitrary telescopic rod section on the tail rod can be extended by an additional 0-53cm (0-20.87") for fine adjustments.
3. Adjusting Bracket Height: Once the pole is stable, adjust the height-adjustable bracket to your desired working level. Use the Height Fine-tuning knob on the bracket to make precise adjustments within a 7cm range. Secure the adjusted height with the dedicated screw.
4. Adjusting Bracket Depth: The bracket can also be adjusted within 5cm in depth, allowing compatibility with various laser levels that measure 6.5-11.5cm from the back.
5. Mounting Your Laser: Attach your line or rotary laser to the 1/4"-20 male thread on the bracket. If necessary, use the 5/8"-11 screw adapter.
6. Garantir a estabilidade: The non-slip surfaces on the foot and head plates, combined with the spring-loaded base, ensure strong fixing. Sturdy foot pedals are provided to make operation easier and safer during setup and adjustment.

Mantemento

• Limpeza: Wipe down the pole and accessories with a clean, damp un pano despois de cada uso para eliminar o po e os residuos. Evite o uso de produtos químicos agresivos ou produtos de limpeza abrasivos.
• Almacenamento: When not in use, disassemble the pole and store all components in the provided soft carry bag. Store in a dry place away from extreme temperatures.
• Inspección: Periodically inspect all connections, screws, and the spring mechanism for any signs of wear or damage. Replace any worn parts to ensure continued safe operation.

Resolución de problemas

Problem: Pole is not stable.

Solución: Ensure all rod sections are securely connected. Verify that the spring-loaded base is firmly pressed against the floor and the top plate against the ceiling. Use the foot pedals to apply additional pressure if needed. Check that the screw clamp on the bracket is tightened.

Problem: Laser level does not fit the bracket.

Solución: The bracket has a 1/4"-20 male thread. If your laser level requires a 5/8"-11 thread, use the included screw adapter. Also, adjust the bracket's depth to accommodate your laser level's dimensions.

Problem: Difficulty in fine-tuning height.

Solución: Ensure the main screw clamp on the bracket is slightly loosened before using the fine-tuning knob. After adjustment, tighten the screw to secure the position.

Consellos para o usuario

• The tripod is made of aluminum, not plastic, providing robust support.
• Utilize the sturdy foot pedals for easier and safer operation, especially when extending the pole to its maximum height.
• The 1cm powerful spring in the base allows for a greater adjustable range and ensures a more stable fixed position.
• Always check the bubble level on the tripod head to ensure your setup is perfectly plumb for accurate measurements.

Garantía e Soporte

The Huepar LP36A Laser Tripod Telescoping Pole comes with a Garantía de dous anos, garantindo a tranquilidade en canto á calidade e o rendemento do produto.

For technical support, warranty claims, or any questions regarding your Huepar product, please contact Huepar Official Store customer service. Refer to your purchase documentation for specific contact details or visit the official Huepar websitio.