Manual do usuario do módulo reductor BEC de 5-12 V HGLRC

1. Introdución

The HGLRC 5-12V BEC Step-down Module is a versatile power management component designed for RC FPV drones and similar applications. It efficiently converts a wide input voltage range (8.4V-28V) into stable 5V or 12V outputs, supporting a working current of up to 2A. This module offers flexible connection options, including direct soldering or wiring terminal connections, and features remote control channel support for switching the module on and off.

HGLRC 5-12V BEC step-down module supporting two-mode voltage conmutación — Figure 1: HGLRC 5-12V BEC Step-down Module overview, highlighting its two-mode voltage switching capability.

2. Características do produto

Supports welding or wiring terminal connection for installation flexibility.
Vol. De entrada amplatagRango e: 8.4 V a 28 V.
Dual output voltage modes: 5V and 12V.
High working current: Up to 2A for stable performance.
Remote control channel support for BEC module ON/OFF control.

3. Que hai na caixa

Por favor, comproba o contido do teu paquete:

HGLRC 5-12V BEC Module ×1
Output cable ×1

Contents of the HGLRC 5-12V BEC package, showing the module and an output cable. — Figure 2: Product List - HGLRC 5-12V BEC module and included output cable.

4. Configuración e instalación

4.1 Opcións de conexión

The HGLRC 5-12V BEC module offers two primary methods for connection:

Soldadura: Direct soldering to the designated pads on the module.
Conexión do terminal de cableado: Using the provided wiring terminals for a plug-and-play solution.

Comparison of soldering and wiring terminal connection methods for the BEC module. — Figure 3: Connection Methods - The module supports both direct soldering and wiring terminal connections.

4.2 Diagrama de cableado

Refer to the following diagram for proper wiring of the BEC module. Ensure correct polarity when connecting power inputs and outputs.

Detailed wiring diagram for the HGLRC 5-12V BEC module, showing input, output, and control connections. — Figure 4: Wiring Diagram. Connect BAT (8.4-28V) to the positive power input and GND to the negative power input. OUT+ and OUT- provide the regulated voltage. RX is for flight control LED/TX connection.

BAT (Positive Power Input): Connect your main battery (8.4V-28V, typically 2-6S LiPo) here.
GND (Negative Power Input): Connect the negative terminal of your battery here.
OUT+ (Positive Output): Provides the regulated 5V or 12V output. Connect to your electrical appliances (e.g., COB light strips).
OUT- (Negative Output): Connect the negative terminal of your electrical appliances here.
RX (Flight Control LED / TX): This pin is used for remote control channel integration to switch the BEC module on/off.

4.3 Saída Voltage Selection (5V / 12V Mode Switch)

The module supports switching between 5V and 12V output modes:

Default (Disconnected): When the solder joint (labeled "12V" on the board, near RX pin) is disconnected, the output voltage é 5V.
12V Output (Connected): When the solder joint is connected (bridged with solder), the output voltage é 12V.

Asegúrese sempre do volume correctotage is selected for your connected devices to prevent damage.

Diagram illustrating the wide voltage input and dual voltage output modes (5V and 12V) of the BEC module, along with remote control support. — Figura 5: Voltage Input/Output details. The module accepts 8.4-28V input and provides 5V or 12V output, controllable via remote channel.

5. Instrucións de funcionamento

Once the HGLRC 5-12V BEC module is correctly wired and the desired output voltage is selected, it will provide stable power to your connected components. The module also supports remote control functionality:

Remote Control ON/OFF: Connect the RX pin to a suitable remote control channel on your flight controller. This allows you to remotely switch the BEC module's output on or off, providing greater control over your drone's accessories. Consult your flight controller's manual for specific instructions on configuring a channel for this purpose.

6. Mantemento

To ensure the longevity and optimal performance of your HGLRC 5-12V BEC module, follow these maintenance guidelines:

Manter limpo: Regularly inspect the module for dust, dirt, or debris. Use a soft, dry brush or compressed air to clean it.
Evitar a humidade: Protect the module from water and excessive humidity, which can cause short circuits and corrosion.
Inspeccionar conexións: Periodically check all soldered joints and wiring terminal connections to ensure they are secure and free from damage. Loose connections can lead to intermittent power supply or component failure.
Xestión da temperatura: Ensure adequate airflow around the module, especially during operation, to prevent overheating.
Manipular con coidado: Avoid dropping or subjecting the module to strong impacts, as this can damage internal components.

7 Solución de problemas

If you encounter issues with your HGLRC 5-12V BEC module, refer to the following troubleshooting steps:

Problema	Causa posible	Solución
Sen saída voltage	Entrada incorrecta voltage. Cableado solto ou incorrecto. Module is switched off via remote control. Fallo do módulo.	Comprobar o voltage está dentro de 8.4V-28V. Check all connections for proper polarity and secure fit. Ensure the remote control channel is configured to turn the BEC on. If all else fails, the module may be faulty; contact support.
Vol de saída incorrectatage (e.g., 5V instead of 12V)	Incorrect solder joint configuration for voltage selección.	Check the solder joint for 5V/12V selection. Bridge it for 12V, leave disconnected for 5V.
Sobrequecemento do módulo	Excessive load on the output. Fluxo de aire insuficiente.	Reduce the load on the 5V/12V output (ensure total current draw is below 2A). Improve ventilation around the module.

8. Especificacións

Detailed technical specifications for the HGLRC 5-12V BEC module:

Parámetro	Valor
Nome	HGLRC 5-12V BEC
Vol. De entradatage	8.4V – 28V (Supports 2-6S LiPo)
Vol. De saídatage	5V 2A / 12V 2A (Switchable)
Corrente máxima de traballo	2A
Dimensións	12.1 mm × 21 mm
Peso	1.3 g
Material	Material composto
Idade recomendada	14+ anos
Para tipo de vehículo	Avións (drons RC FPV)

Image showing the HGLRC 5-12V BEC module and its key specifications: Name, Input Voltage, Vol. de saídatage, Size, and Weight. — Figure 6: Product Specifications summary.

9. Consellos de usuario

Non se dispoñía de consellos específicos para o usuario a partir dos recursos proporcionados.views or Q&A. However, general best practices for BEC modules include:

Always double-check your wiring before applying power to avoid short circuits or damage to components.
Asegúrese de que o volume de saídatage setting (5V or 12V) matches the requirements of the devices you are powering.
Consider using heat shrink tubing or conformal coating for added protection in harsh FPV environments.

10. Garantía e soporte

For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your proof of purchase for any warranty claims.

	Manual do dron de carreiras HGLRC Sector 5 V3 VTX FPV Manual de usuario completo para o dron de carreiras HGLRC Sector 5 V3 VTX FPV. Abarca a configuración, a configuración, as especificacións e a resolución de problemas deste dron de carreiras avanzado.
	HGLRC Racewhoop30 HD FPV Racing Drone Manual and Setup Guide Comprehensive manual for the HGLRC Racewhoop30 HD FPV Racing Drone, covering product specifications, interface description, setup, calibration, receiver configuration, VTX settings, flight modes, LED configuration, and troubleshooting.
	Manual do receptor HGLRC ELRS 2.4 RX-T Este manual ofrece información detallada sobre o receptor HGLRC ELRS 2.4 RX-T, incluíndo os parámetros do produto, os diagramas de conexión, os pasos de vinculación e as precaucións de uso.
	Manual do dron de carreiras HGLRC Sector25CR Sub250g HD FPV Manual de usuario completo para o dron de carreiras HGLRC Sector25CR Sub250g HD FPV, que abrangue as especificacións do produto, a configuración, a configuración e a resolución de problemas.
	Manual do dron HGLRC Sector4 FR Freestyle FPV HD: guía de configuración e configuración Guía completa para configurar o dron HGLRC Sector4 FR Freestyle FPV HD, que abrangue as especificacións do produto, a interface, a configuración do controlador de voo, a calibración, a configuración do receptor, o cableado VTX/DJI, os modos de voo, o OSD, a configuración dos LED e a resolución de problemas.
	Manual do usuario do dron de carreiras HGLRC Petrel132 FPV 6S Manual de usuario completo para o drón de carreiras HGLRC Petrel132 FPV 6S, que detalla as especificacións do produto, as descricións da interface, os procedementos de configuración, os axustes de configuración e as guías de resolución de problemas.

HGLRC HGLRC 5-12V BEC