1. Introdución
The ASRock STEEL LEGEND 1000W is an advanced ATX 3.1 computer power supply designed for high-performance systems. It features 80 PLUS GOLD and Cybenetics Platinum (efficiency) and Lambda A (acoustics) certifications, ensuring high energy efficiency and low noise operation. With 1000W of continuous power and 83.4A on a single 12V line, it is suitable for demanding gaming PCs, workstations, and video processing systems. Its fully modular design and flat cables facilitate clean cable management and improved airflow within the PC case. The STEEL LEGEND 1000W is built to meet current and future hardware demands, including support for PCIe 5.1 and a native 12V-2x6 connector.
2. Información de seguridade
- WARNING: Do not open the housing - risk of electric shock. There are no user-serviceable parts inside. Opening the unit will void the warranty.
- Ensure the power supply is disconnected from the main power outlet before installation, removal, or cleaning.
- Instale a fonte de alimentación nunha zona ben ventilada, lonxe de fontes de calor, luz solar directa e humidade.
- Emprega só os cables modulares que se inclúen con esta fonte de alimentación. O uso de cables incompatibles pode danar a fonte de alimentación e os compoñentes conectados.
- Asegúrese de que todas as conexións estean seguras antes de encender o sistema.
- This power supply is equipped with multiple protection functions (OCP, UVP, SCP, OVP, OTP, OPP) to safeguard against electrical anomalies. If the unit shuts down unexpectedly, check for potential issues before restarting.
3. Contido do paquete
Verifica que todos os elementos estean presentes no teu paquete:
- ASRock STEEL LEGEND 1000W Power Supply Unit
- Modular Cable Set (see details below)
- Cable de alimentación de CA
- Parafusos de montaxe
Figure 3.1: ASRock STEEL LEGEND 1000W PSU and Retail Packaging
Figure 3.2: Modular Cable Set
Cable modular sobreview:
- 1x 20+4 pin ATX Motherboard Connector
- 2x 4+4 pin EPS CPU Connectors
- 3x 6+2 pin PCIe Connectors (for graphics cards)
- 1x 12+4 pin PCIe 5.1 Connector (for latest generation graphics cards)
- 9x SATA Power Connectors
- 3x 4-pin Molex Peripheral Connectors
4. Configuración e instalación
Follow these steps to install your ASRock STEEL LEGEND 1000W Power Supply:
- Prepara o teu sistema: Ensure your computer is completely powered off and unplugged from the wall outlet. Open your computer case.
- Retirar a fonte de alimentación antiga (se corresponde): Desconecta todos os cables da túa antiga fonte de alimentación e retíraa da carcasa.
- Montar a nova fonte de alimentación: Carefully place the ASRock STEEL LEGEND 1000W into the PSU mounting bay of your computer case. Secure it with the provided screws. Ensure the fan is facing the correct direction for optimal airflow (usually facing down if there's a bottom vent, or up if not).
- Connect Modular Cables to PSU: Identify the necessary cables for your components (motherboard, CPU, graphics card(s), SATA devices, etc.). Connect these cables to the corresponding modular ports on the power supply. Refer to the diagram below for port identification.
Figure 4.1: Modular Cable Connection Panel
- Connect Cables to Components:
- Placa base: Connect the 20+4 pin ATX cable to your motherboard.
- CPU: Connect the 4+4 pin EPS CPU cable(s) to your motherboard's CPU power connector(s).
- Tarxeta(s) gráfica(s): Connect the 6+2 pin PCIe cable(s) or the 12+4 pin PCIe 5.1 cable to your graphics card(s). Ensure you use the correct connector type for your specific GPU.
- Dispositivos de almacenamento: Conecta os cables de alimentación SATA aos teus SSD, HDD e unidades ópticas.
- Periféricos: Connect Molex cables to any other peripherals requiring this type of power.
- Xestión de cables Route cables neatly to improve airflow and aesthetics. The flat cables provided are designed to assist with this.
- Verificación final: Double-check all connections to ensure they are firmly seated.
5. Instrucións de funcionamento
Unha vez instalada a fonte de alimentación e conectados todos os compoñentes:
- Conectar alimentación de CA: Plug the AC power cord into the power supply's inlet and then into a wall outlet.
- Power On the PSU: Locate the main power switch on the rear of the power supply and flip it to the 'ON' (I) position.
Figure 5.1: Rear Panel with Power Switch and iCOOL Switch
- Start Your Computer: Preme o botón de acendido da carcasa do teu ordenador.
iCOOL Mode
The ASRock STEEL LEGEND 1000W features an iCOOL MODE switch on the rear panel. This mode allows the fan speed to automatically adjust based on the power supply's temperature and load. When activated, the fan operates almost silently at low loads and increases speed for effective cooling under high loads. To enable or disable iCOOL MODE, toggle the switch next to the main power switch (refer to Figure 5.1).
6. Mantemento
- Limpeza: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use a soft, dry cloth or compressed air. Ensure the power supply is turned off and unplugged before cleaning.
- Fluxo de aire: Ensure that the power supply's intake and exhaust vents are not obstructed. Good airflow is crucial for efficient cooling and longevity.
- Non desmontar: Never attempt to open the power supply unit. High voltages are present inside, even when unplugged, and doing so will void your warranty.
7 Solución de problemas
If you encounter issues with your power supply, try the following steps:
- Sen enerxía:
- Comprobe se o cable de alimentación de CA está conectado correctamente tanto á fonte de alimentación como á toma de corrente.
- Ensure the main power switch on the PSU's rear panel is in the 'ON' (I) position.
- Verifica que a toma de corrente funciona conectando outro dispositivo.
- Comprobe todas as conexións dos cables modulares para asegurarse de que estean firmemente asentadas tanto na fonte de alimentación como nos compoñentes.
- O sistema apágase inesperadamente:
- The power supply's built-in protection mechanisms (OCP, OVP, OTP, OPP, UVP, SCP) may have activated due to an overload, overvoltage, overheating, or short circuit.
- Ensure your system's power consumption does not exceed the PSU's capacity.
- Check for proper ventilation around the PSU and inside the case to prevent overheating.
- Disconnect non-essential peripherals to see if the issue persists.
- Fan Not Spinning (iCOOL Mode): If iCOOL Mode is enabled, the fan may not spin at low loads to maintain silent operation. This is normal. The fan will activate as the load and temperature increase. If the fan never spins even under heavy load, ensure iCOOL Mode is enabled or try disabling it to force the fan on.
If problems persist after performing these checks, contact ASRock customer support or your retailer for assistance.
8. Especificacións
Figure 8.1: ASRock STEEL LEGEND 1000W Power Supply Unit
| Característica | Descrición |
|---|---|
| Potencia total | 1000 W |
| Certificación 80 PLUS | 80 PLUS Ouro |
| Tipo PFC | PFC activo |
| Versión ATX | 3.1 |
| Max Output Current (+12V) | 83.4 A |
| Dimensións (ancho x profundo x alto) | 150 mm x 150 mm x 86 mm |
| Tipo de refrixeración | Activo |
| Diámetro do ventilador | 13.5 cm |
| Rodamento do ventilador | Rodamento dinámico de fluídos (FDB) |
| Características do ventilador | iCOOL MODE (automatic speed adjustment) |
| Capacitores | Capacitores 100% xaponeses |
| MTBF (tempo medio entre fallos) | 100,000 horas a 25 °C |
| Funcións de protección | OCP, UVP, SCP, OVP, OTP, OPP |
| Conector da placa base | 1x 20+4 pin ATX |
| CPU Power Connectors | 2x 4+4 pin EPS |
| Conectores de alimentación PCIe | 3x 6+2 pin, 1x 12+4 pin PCIe 5.1 |
| Conectores de alimentación SATA | 9 |
| Peripheral (Molex) Connectors | 3 x 4 pines |
| Tipo de cableado | Totalmente modular |
| Cor do produto | Negro |
9. Consellos de usuario
- Xestión de cables Adántachetage of the fully modular design and flat cables to keep your PC interior tidy. This not only improves aesthetics but also enhances airflow, contributing to better system cooling.
- Refrixeración óptima: Ensure your PC case has good airflow and that the PSU fan is not obstructed. If your case has a bottom intake, orient the PSU with the fan facing down.
- iCOOL Mode for Silence: If you prioritize quiet operation, especially during light tasks, ensure the iCOOL Mode is enabled. The fan will only spin up when necessary, keeping noise levels to a minimum.
- A proba de futuro: The native PCIe 5.1 connector is designed for the latest high-power graphics cards. If you plan to upgrade your GPU in the future, this PSU is already equipped to handle it.
10. Garantía e soporte
The ASRock STEEL LEGEND 1000W Power Supply comes with a 10-year manufacturer's warranty, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or further assistance, please contact ASRock customer service or your authorized retailer. Keep your proof of purchase for warranty validation.
