Bogen Classic Series Amp Manual de instrucións C20

1. Introdución

This manual provides essential instructions for the proper installation, operation, and maintenance of your Bogen Classic Series Amp C20. Please read this manual thoroughly before using the product to ensure safe and efficient performance. Retain this manual for future reference.

2. Información de seguridade

AVISO: Este produto contén produtos químicos coñecidos polo estado de California por causar cancro e defectos de nacemento ou outros danos á reprodución.

Always observe basic safety precautions when using electrical equipment to reduce the risk of fire, electric shock, and injury to persons.

• Non expoña este aparello á choiva nin á humidade.
• Non bloquee ningunha abertura de ventilación. Instáleo segundo as instrucións do fabricante.
• Non instale preto de fontes de calor como radiadores, rexistros de calor, cociñas ou outros aparellos (incluíndo amplificadores) que producen calor.
• Use só anexos/accesorios especificados polo fabricante.
• Encargue toda a reparación a persoal de servizo cualificado.

3. Produto rematadoview

The Bogen Classic Series Amp C20 is a single-channel amplifier designed for various audio applications. It features robust construction and reliable performance.

3.1 Características principais

• Monocanal ampmáis vivo
• Surface Mount design
• Vol. De entradatage: 120 voltios
• Potencia de saída: 20 Watts

3.2 Contido do paquete

Ao desembalar, comproba que se inclúen os seguintes elementos:

• Bogen Classic Series Amp C20
• Funil
• Manual de instrucións (este documento)

3.3 Controis e indicadores do panel frontal

Image 1: Front panel of the Bogen Classic Series Amp C20. This image displays the MIC1, MIC2, AUX, and TREBLE control knobs, along with the POWER switch and the "Classic Series" branding.

1. MIC1 Input Level Control: Axusta o volume da entrada de micrófono 1.
2. MIC2 Input Level Control: Axusta o volume da entrada de micrófono 2.
3. AUX Input Level Control: Adjusts the volume for the Auxiliary input.
4. Control de agudos: Adjusts the high-frequency response of the audio output.
5. Interruptor POWER: Cambia o ampacendido e apagado do lificador.

3.4 Conexións do panel traseiro

Image 2: Rear panel of the Bogen Classic Series Amp C20. This image shows the various input and output connections, including power input and speaker terminals.

The rear panel contains connections for power, microphone inputs, auxiliary inputs, and speaker outputs. Specific details on these connections are provided in the Setup section.

4. Configuración e instalación

4.1 Montaxe

The Bogen Classic Series Amp C20 is designed for surface mounting. Ensure the mounting surface is stable and capable of supporting the unit's weight (approximately 4.5 pounds). Allow adequate ventilation around the unit to prevent overheating.

4.2 Conexión eléctrica

1. Ensure the POWER switch on the front panel is in the OFF position.
2. Connect the power cord to a standard 120 Volt AC outlet.

4.3 Conexións de entrada de audio

Connect your audio sources to the appropriate inputs on the rear panel:

• Micrófonos: Connect microphones to the MIC1 and MIC2 input jacks.
• Auxiliary Devices: Connect line-level audio sources (e.g., CD player, media player) to the AUX input jacks.

4.4 Conexións de saída de altofalantes

Connect your speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for all speaker connections. Refer to your speaker's manual for impedance matching requirements.

5. Funcionamento

5.1 Acendido/Apagado

1. Para encender o amplifier, press the POWER switch on the front panel to the ON position. The power indicator (if present) will illuminate.
2. To power off, press the POWER switch to the OFF position.

5.2 Axustar os niveis de entrada

1. Start with all input level controls (MIC1, MIC2, AUX) set to their minimum position.
2. Begin playing audio from your desired source.
3. Slowly increase the corresponding input level control until the desired volume is achieved.
4. Adjust the TREBLE control to fine-tune the high-frequency response to your preference.

5.3 Consellos xerais de uso

• Avoid setting volume levels too high, which can cause distortion and potentially damage speakers.
• Ensure all connections are secure before operating the ampmáis vivo.

6. Mantemento

6.1 Limpeza

Limpe o exterior do amplifier with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners, as they may damage the finish or internal components.

6.2 Ventilación

Comprobe regularmente que as aberturas de ventilación estean libres de po e residuos para garantir un fluxo de aire axeitado e evitar o sobrequecemento.

6.3 Servizos

Non hai pezas reparables polo usuario no interior amplificador. Encargue toda a reparación a persoal de servizo cualificado.

7 Solución de problemas

If you experience issues with your Bogen Classic Series Amp C20, consult the following table before contacting support.

8. Especificacións

Nota: as especificacións están suxeitas a cambios sen previo aviso.

9. Garantía e soporte

For warranty information and technical support, please refer to the official Bogen websitio web ou póñase en contacto co seu departamento de atención ao cliente. Garde o recibo da compra como proba de compra para reclamacións de garantía.

Información de contacto:

• Websitio: www.bogen.com (Placeholder, actual URL pode variar)
• Atención ao cliente: Consulte o websitio web para obter os datos de contacto rexionais.