Introdución
The Harvey TFE Paste is a high-quality, non-hardening, and non-separating white thread compound formulated with PTFE (Polytetrafluoroethylene). This product is designed to create a secure and leak-proof seal on threaded pipe joints in various plumbing applications.
It effectively seals and lubricates both plastic and metal threaded connections, ensuring durability and reliability for your plumbing systems.
Información de seguridade
WARNING: Cancer - www.P65Warnings.ca.gov
PRECAUCIÓN: Contents may be used on liquid and gaseous systems within above limits. Do not use on halogens or oxygen; instead use Harvey's PTFE thread tape. Do not take internally; if swallowed seek immediate medical attention. Do not induce vomiting. Use in well ventilated area. KEEP OUT OF REACH OF CHILDREN. NON-HAZARDOUS PER 29 CFR 1910.1200.
EMERGENCY/FIRST AID: Call 1-877-740-5015 for instructions.
Características do produto
- Seals and lubricates plastic or metal threaded joints.
- Non-hardening and non-separating formula.
- Withstands up to 3,000 PSI on gases at temperatures from -50°F to +400°F.
- Withstands up to 10,000 PSI on liquids at temperatures from -50°F to +500°F.
- Suitable for use with water, steam, natural & LP gas, oils, fuels, and dilute acids.
- Compatible with various pipe materials including metals, PVC, CPVC, ABS, polypropylene, and nylon.
- Lubricates as it seals, preventing harm to seals of valves or faucets.
- Easy application tube, ideal for small jobs.
Aplicacións
Harvey TFE Paste is designed for sealing threaded pipe joints in a wide range of applications, including both plastic and metal piping systems. It is suitable for lines carrying various substances and operating under specific temperature and pressure conditions.
Image: Demonstrates the application of Harvey TFE Paste on both plastic and metal pipe threads, highlighting its versatility.
Compatible Pipe Materials:
- Metais
- PVC (cloruro de polivinilo)
- CPVC (Chlorinated Polyvinyl Chloride)
- ABS (acrilonitrilo butadieno estireno)
- Polipropileno
- Nylon
Suitable for Pipes Carrying:
Image: Visual representation of substances the TFE Paste is suitable for: water, steam, and dilute acid/caustics.
- Auga
- Vapor
- Natural & LP Gas
- Aceites
- Combustibles
- Dilute Acids
Instrucións de funcionamento
Preparación:
- Ensure the male pipe threads are clean and free from dirt, grease, or old sealant residue.
- Confirm the pipe material is compatible with Harvey TFE Paste (refer to "Applications" section).
Aplicación:
- Unscrew the cap from the Harvey TFE Paste tube.
- Apply a sufficient amount of paste evenly onto the male pipe threads. Ensure complete coverage of the threads.
- Assemble the threaded joint by screwing the male and female components together.
- Tighten the joint to the manufacturer's specifications for the pipe and fitting. The paste lubricates as it seals, facilitating proper tightening.
The paste is non-hardening, allowing for adjustments if needed before the system is pressurized.
Especificacións
| Fabricante | WM Harvey |
| Número de peza | 023015-48 |
| Número de modelo do artigo | 023015-48 |
| Peso do elemento | 2.08 onzas |
| Dimensións do produto | 8.28 x 6.35 x 5.82 polgadas |
| Tamaño | 1 fl oz (29 mL) |
| Cor | Branco |
| Material | PTFE, Lubricants, Sealants, Solids |
| Contido VOC | 46 g/l |
