Produto rematadoview
The Peerless ST630P Tilt Wall Mount is designed to securely hold flat panel displays ranging from 10 to 29 inches. This mount offers a discreet installation, keeping your display close to the wall, and features a one-touch tilt mechanism for easy angle adjustments.
Image: The Peerless ST630P Tilt Wall Mount, showcasing its black metal construction and VESA mounting plate.
Características clave
- VESA 75mm and 100mm compatible
- One-touch tilt adjustment: +15° to -5° without tools
- Weight capacity: 80 lbs (36.3 kg)
- Ability to lock desired tilt angle
- Construción metálica duradeira
Contido do paquete
Verifique que estean presentes todos os compoñentes antes de comezar a instalación.
- Smartmount Universal 10"-29" Tilt Wall Mount
- Mounting Hardware Kit (various screws and adapters for display and wall mounting)
Configuración e instalación
Información importante de seguridade: Read all instructions before installation. If you have any doubts about your ability to safely install this mount, consult a qualified professional. Ensure the mounting surface can support the combined weight of the mount and the display.
Ferramentas necesarias (non incluídas)
- Destornillador Phillips
- Broca
- Localizador de montantes (para a instalación de montantes de madeira)
- Nivel
- Lapis
- Cinta métrica
Opcións de montaxe
The ST630P mount can be installed on a single wood stud, concrete, or cinder block.
- Determinar a localización de montaxe: Choose a location on the wall that is structurally sound and allows for optimal viewing. Use a stud finder to locate the center of a wood stud if mounting to wood.
- Marcar os buratos: Hold the wall plate against the wall at the desired height and use a level to ensure it is straight. Mark the drill hole locations with a pencil.
- Perforar buratos piloto:
- For wood stud: Drill pilot holes according to the recommended size in the full instruction manual.
- For concrete/cinder block: Drill pilot holes and insert appropriate anchors.
- Fixar a placa de parede: Secure the wall plate to the wall using the provided mounting hardware. Ensure it is firmly attached.
- Fixar os soportes da pantalla: Attach the VESA compatible brackets to the back of your display using the appropriate screws from the hardware kit. Ensure the brackets are centered and securely fastened.
- Pantalla de montaxe: Carefully lift the display and hook the brackets onto the wall plate. Ensure the display is securely seated on the mount.
- Axustar a inclinación: Use the one-touch tilt mechanism to adjust the display to your desired viewing angle. The tilt can be adjusted from +15° to -5°.
- Lock Tilt (Optional): If a fixed tilt angle is desired, the mechanism allows for locking the tilt in place.
Imaxe: Un example of the Peerless ST630P Tilt Wall Mount installed in a home setting, showcasing a display mounted above a bar area.
Instrucións de funcionamento
The Peerless ST630P mount is designed for simple operation once installed.
Axuste do ángulo de inclinación
To adjust the vertical tilt of your display, simply grasp the top or bottom edge of the display and gently push or pull to achieve the desired angle. The one-touch tilt mechanism allows for smooth adjustment between +15 degrees (upward tilt) and -5 degrees (downward tilt) without the need for tools.
Locking Tilt Angle
For applications where a fixed tilt angle is preferred, the mount includes a feature to lock the display in position. Refer to the detailed installation guide for specific instructions on engaging the tilt lock mechanism.
Mantemento
The Peerless ST630P Tilt Wall Mount requires minimal maintenance.
- Periodically check all mounting screws and connections to ensure they remain secure.
- Limpa o soporte cun pano suave e seco. Evita produtos de limpeza ou solventes abrasivos.
- Do not attempt to lubricate any moving parts.
Resolución de problemas
If you encounter issues with your Peerless ST630P mount, refer to the following common solutions:
- A pantalla non está nivelada: Ensure the wall plate was installed using a level. If not, carefully remove the display, loosen the wall plate screws, adjust, re-level, and re-tighten.
- A pantalla semella inestable: Verify that all mounting hardware is securely tightened to both the wall and the display. Ensure the display's weight does not exceed the mount's 80 lbs capacity.
- Dificultade para axustar a inclinación: Check for any obstructions behind the display. Ensure the tilt locking mechanism (if engaged) is disengaged before attempting to adjust.
For further assistance, contact Peerless-AV customer support.
Especificacións
| Atributo | Valor |
|---|---|
| Modelo | ST630P |
| Marca | Peerless-AV |
| Compatible Display Sizes | 10 a 29 polgadas |
| Capacidade de peso | 80 libras (36.3 kg) |
| Compatibilidade VESA | 75 mm x 75 mm, 100 mm x 100 mm |
| Axuste de inclinación | +15° / -5° |
| Tipo de montaxe | Soporte de parede |
| Material | Metal |
| Dimensións do produto (L x W x H) | 6.6 x 6.2 x 2.23 polgadas (16.8 x 15.7 x 5.7 cm) |
| Peso do elemento | 1.65 libras (0.75 kg) |
Información da garantía
The Peerless ST630P Tilt Wall Mount comes with a 5 ano de garantía limitada. Esta garantía cobre os defectos nos materiais e na fabricación no uso normal.
Importante: A garantía non cobre o mal uso do produto.
For full warranty terms and conditions, please refer to the official Peerless-AV websitio ou póñase en contacto co servizo de atención ao cliente.
Soporte e Contacto
For technical support, replacement parts, or further inquiries, please contact Peerless-AV customer service.
Websitio: www.peerless-av.com
Fabricante: Peerless Industries
