Grant 3593

Manual de usuario do kit de instalación do volante Grant 3593

Brand: Grant

Introdución

This manual provides comprehensive instructions for the installation of the Grant 3593 Steering Wheel Installation Kit. This kit is designed to facilitate the mounting of Grant Classic Series, Challenger Series, or Signature Series steering wheels onto compatible vehicles. It includes all necessary components and step-by-step guidance to ensure a proper and secure installation.

Important Safety Note: This kit is not intended for use on any airbag-equipped vehicle. Always ensure the vehicle's power is disconnected before beginning installation.

Compoñentes incluídos

The Grant 3593 Installation Kit typically includes the following parts:

  • Die-cast hub
  • Grade 5 hardware (bolts, washers)
  • Matte black trim pieces
  • Horn contact components (spring, contact plate, wire)
  • Detailed step-by-step instructions (this manual)
Image showing all components of the Grant 3593 Installation Kit, including a black die-cast hub, a metal horn contact, a spring, three bolts, and a brown horn contact plate.
This image displays the complete set of parts included in the Grant 3593 Installation Kit. Visible components are the black hub, the metal horn contact with wire, a spring, three hex-head bolts, and a circular brown horn contact plate.

Instrucións de instalación

Follow these steps carefully to install your Grant steering wheel using the 3593 kit. Always refer to your vehicle's service manual for specific procedures related to steering wheel removal.

  1. Preparación: Disconnect the vehicle's battery to prevent accidental electrical shorts. Ensure the front wheels are straight and the steering wheel is centered.
  2. Remove Existing Steering Wheel: Carefully remove the original steering wheel according to the vehicle manufacturer's instructions. This usually involves removing the horn button, disconnecting electrical wires, and unbolting the steering wheel from the steering column shaft.
  3. Install Horn Contact Components: Attach the horn contact plate and spring to the steering column as specified in the kit's detailed instructions. Connect the horn wire to the vehicle's horn circuit.
  4. Mount the Die-Cast Hub: Slide the die-cast hub onto the steering column shaft, aligning the splines. Ensure it seats properly and fully engages with the shaft.
  5. Protexe o Hub: Use the provided grade 5 hardware to securely fasten the hub to the steering column. Tighten bolts evenly and to the manufacturer's recommended torque specifications.
  6. Attach Steering Wheel: Position your Grant Classic, Challenger, or Signature Series steering wheel onto the installed hub. Align the bolt holes on the steering wheel with those on the hub.
  7. Fasten Steering Wheel: Use the appropriate hardware (often supplied with the Grant steering wheel itself) to attach the steering wheel to the hub. Tighten all fasteners securely and evenly.
  8. Install Trim Pieces and Horn Button: Place the matte black trim pieces as directed around the hub. Install the horn button, ensuring it makes proper electrical contact for horn activation.
  9. Comprobacións finais: Reconnect the vehicle's battery. Test the horn and ensure the steering wheel is firmly attached, operates smoothly, and has no excessive play. Check for any loose components or wires.
A Grant steering wheel installed in a classic car interior, showing the finished appearance.
This image illustrates a Grant steering wheel, similar to those compatible with the 3593 installation kit, mounted within a vehicle's interior. It provides a visual reference for the completed installation.

Operación

Once the Grant steering wheel is correctly installed with the 3593 kit, its operation is straightforward. The steering wheel functions as the primary control for vehicle direction. The horn button, integrated into the steering wheel, activates the vehicle's horn when pressed. Ensure all connections are secure for reliable operation and responsive steering.

Mantemento

To ensure the longevity and proper function of your Grant steering wheel and installation kit, consider the following maintenance tips:

  • Inspección periódica: Periodically check all mounting hardware for tightness. Vibrations can sometimes loosen fasteners over time.
  • Limpeza: Clean the steering wheel and trim pieces with a mild automotive interior cleaner and a soft cloth. Avoid harsh chemicals that could damage materials or finishes.
  • Horn Function: Occasionally test the horn to ensure it is working correctly. If the horn becomes intermittent, check the electrical connections at the horn button and the horn contact plate.
  • Evite a forza excesiva: Do not apply excessive force to the steering wheel or horn button, as this can damage internal components or the steering column.

Resolución de problemas

This section addresses common issues that may arise during or after the installation of the Grant 3593 kit.

Horn Not Working

  • Comprobe a conexión da batería: Ensure the vehicle battery is properly reconnected.
  • Verify Horn Wire: Confirm the horn wire from the kit is correctly connected to the vehicle's horn circuit.
  • Inspect Contact Plate: Ensure the horn contact plate and spring are correctly positioned and making proper electrical contact.
  • Botón de bocina: Check the horn button itself for proper function and secure connection.

Steering Wheel Feels Loose

  • Tighten Hub Bolts: Re-check and tighten the bolts securing the die-cast hub to the steering column shaft.
  • Tighten Steering Wheel Bolts: Ensure the bolts attaching the steering wheel to the hub are securely fastened.
  • Spline Engagement: Verify that the hub and steering wheel splines are fully engaged with the steering column shaft and that no damage has occurred.

Especificacións

CaracterísticaDetalle
MarcaGrant
Modelo3593 Kit de instalación
Peso do elemento1.6 onzas
Dimensións do produto0.7 x 0.7 x 0.6 polgadas
Número de peza do fabricante3593
CompatibilidadeGrant Classic Series, Challenger Series, or Signature Series steering wheels
MaterialDie-cast hub, Grade 5 hardware
Nota especialNot for use on any airbag equipped vehicle
Grant brand logo.
The official logo for Grant Products, indicating the manufacturer of this installation kit.

Información da garantía

Grant Products typically offers a limited warranty on its products against defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the documentation included with your purchase or visit the official Grant Products websitio. Garda o comprobante de compra para reclamacións de garantía.

Atención ao cliente

For further assistance, technical support, or inquiries regarding the Grant 3593 Installation Kit, please contact Grant Products customer service.

You may find contact information on the official Grant Products websitio: www.grantproducts.com (Nota: Este é un marcador de posición) URL; please refer to actual product documentation for correct contact details).

Documentos relacionados - 3593

Preview Grant Steering Wheel Installation Guide: Classic/Challenger Models
Detailed instructions for installing Grant Classic/Challenger steering wheels, covering FORM #2 and FORM 7A for the #4405 Specialty Installation Kit. Includes safety, installation steps, torque specs, and warranty information.
Preview Grant 5595/5595-1 Billet Steering Wheel Installation Guide
Comprehensive installation instructions for Grant's 5595/5595-1 billet steering wheel kit. Covers removal of original wheel, preparation, and installation steps for vehicles without airbags, along with warranty information.
Preview Guía de instalación do volante Grant: series Classic/Challenger e Signature
Instrucións completas de instalación para os volantes das series Grant Classic/Challenger e Signature, incluíndo a extracción, a montaxe do cubo, o cableado e a información sobre a garantía. Asegúrate de que o axuste e o funcionamento da bucina sexan axeitados para o teu vehículo.
Preview Guía de instalación do volante Grant (kits 3249, 3288, 3294)
Comprehensive installation instructions for Grant steering wheel kits, detailing the removal of old wheels, assembly of new Grant wheels, horn button modifications, and important safety and warranty information. Designed for classic and Challenger models.
Preview GRANT Steering Wheel Installation Guide and Warranty Information
Comprehensive installation instructions, diagram descriptions, torque specifications, and limited warranty details for GRANT steering wheels and hub kits. Includes specific guidance for Toyota and Honda/Acura vehicles. Learn how to safely remove your old wheel and install your new GRANT steering wheel.
Preview Guía de instalación do volante GRANT para os modelos 5560/5560-1 e 5592/5592-1
Step-by-step instructions for installing GRANT steering wheels (models 5560/5560-1, 5592/5592-1) and a supplement for 1971-on Volkswagen. Includes removal of old wheel, installation of new wheel, warranty information, and important safety warnings. Not for use on airbag-equipped vehicles.