Produto rematadoview
The INTEX Easy Set Inflatable Swimming Pool (Model 28120EH) offers a convenient and enjoyable swimming experience. This round, above-ground pool measures 10 feet in diameter with a 30-inch depth, holding approximately 1,018 gallons (3,853 liters) of water. Constructed from durable, puncture-resistant 3-Ply PVC material, it is designed for quick setup and lasting use. The pool features an inflatable top ring that rises as the pool fills with water, simplifying the installation process.
This pool is suitable for outdoor use and is weather-resistant. It is designed for ages 6 and up, and adult supervision is required for children.
Información de seguridade
AVISO: O incumprimento destas instrucións pode provocar lesións graves ou a morte.
- Non apto para nenos menores de 3 anos.
- To be used under adult supervision at all times.
- Should not be used by children over 36 months without appropriate supervision.
- NO JUMPING: Do not jump into the pool.
- NON MERXELO: Do not dive into the pool.
- NO SLOPING GROUND: Ensure the pool is set up on a completely level surface to prevent collapse and injury.
- Manteña os nenos baixo supervisión directa no ambiente acuático.
- Empty the pool when not in use to prevent unsupervised access by young children.
- Install fencing or other approved barriers to prevent unsupervised access to the pool by children.
Image: Intex Easy Set Pool showing safety icons for no jumping, no diving, and level ground, along with dimensions (10 ft diameter, 30 in height, 23 in water depth, 1018 gal capacity).
Instrucións de configuración
Setting up your INTEX Easy Set Pool is designed to be straightforward, typically taking about 10 minutes before filling with water. Follow these steps for proper installation:
- Prepare o terreo: Select a firm, level surface in your backyard. It is highly recommended to place a ground cloth (sold separately) underneath the pool to protect the bottom from punctures and debris. Ensure the area is free of sharp objects, rocks, or uneven terrain.
- Lay Out the Pool: Carefully unroll and spread out the pool liner on the prepared ground. Ensure the drain plug is positioned away from any structures or areas where water drainage could cause damage.
- Inflate the Top Ring: Locate the air valve on the top inflatable ring. Use an air pump (manual or electric, sold separately) to inflate the ring until it is firm but not over-inflated. The top ring should feel taut to the touch.
- Comezar a encher con auga: Start filling the pool with water using a garden hose. As the water level rises, the inflatable top ring will begin to float and lift the pool walls into shape. Smooth out any wrinkles on the bottom of the pool as it fills.
- Monitor de nivel de auga: Continue filling until the water reaches the fill line indicated on the pool liner, or just below the inflatable top ring. Do not overfill.
Image: Visual guide demonstrating the three simple steps for setting up the Intex Easy Set Pool.
Image: A couple filling the pool, highlighting the quick setup time.
Operación
Once your pool is set up and filled, it's ready for use. The pool provides a comfortable water depth of approximately 23 inches (58 cm), making it suitable for various ages under supervision.
- Profundidade da auga: The actual water depth is about 23 inches (58 cm), which is ideal for children and adults to cool off.
- Filter Pump (Sold Separately): For optimal water clarity and hygiene, it is recommended to use an external filter pump. The pool includes dual suction outlet fittings designed to connect to an optional filter pump (not included).
- Entrada e saída: For easier and safer entry and exit, especially for younger children, consider purchasing a small pool ladder or step (sold separately).
Image: A father and son enjoying the pool, demonstrating typical use.
Image: Highlighting the recommended age for pool users.
Mantemento
Proper maintenance ensures the longevity of your pool and the cleanliness of its water. Regular care is essential.
- Tratamento de augas: Regularly test and treat the pool water with appropriate chemicals (e.g., chlorine, pH adjusters) to maintain sanitation and clarity. Follow the chemical manufacturer's instructions for dosage and application.
- Limpeza: Use a pool skimmer to remove debris from the water surface. For the pool interior, a soft brush or pool vacuum (sold separately) can be used.
- Funcionamento da bomba de filtro: If using an optional filter pump, operate it daily for several hours to circulate and filter the water. Clean or replace filter cartridges as recommended by the pump manufacturer.
- Covering the Pool: When not in use, cover the pool with a pool cover (sold separately) to prevent debris from entering and to reduce water evaporation.
- Reparación de pinchazos: The pool is made with puncture-resistant material, but in case of damage, a repair patch is included for easy fixes. Clean and dry the area around the puncture before applying the patch firmly.
Image: Illustration of the durable 3-Ply PVC material used in the pool construction.
Image: Depiction of HydroAeration Technology, which improves water filtration and clarity.
Image: Illustrates the dual suction outlet fittings for connecting an optional filter pump to improve water hygiene.
Resolución de problemas
- Pool Losing Water:
- Check for leaks in the inflatable top ring or the main pool liner. Use the included repair patch for small punctures.
- Asegúrese de que o tapón de drenaxe estea ben pechado.
- Verify the pool is on a perfectly level surface. Uneven ground can cause water to spill over one side or put undue stress on the pool structure, leading to leaks or collapse.
- Water Not Clear:
- Ensure your optional filter pump is running for sufficient periods daily.
- Check and clean/replace the filter cartridge.
- Test water chemistry (chlorine, pH) and adjust as necessary.
- Desinflado do anel superior:
- Check the air valve for a secure cap.
- Inspect the top ring for small punctures. Use soapy water to identify air leaks and apply the repair patch.
Especificacións
| Característica | Detalle |
|---|---|
| Marca | INTEX |
| Número de modelo | 28120 EH |
| Dimensións do produto | 120"L x 120"A x 30"A (10 pés de diámetro x 30 polgadas de altura) |
| Profundidade da auga | 23 polgadas (58 cm) |
| Capacidade de auga | 1,018 galóns (3,853 litros) |
| Forma | Redondo |
| Cor | Azul |
| Material | Puncture-resistant 3-Ply PVC Plastic |
| Peso do elemento | 16.94 libras (7.7 quilogramos) |
| Requírese montaxe | Si |
| Característica especial | Resistente á intemperie |
| Uso interior/exterior | Ao aire libre |
Image: Diagram illustrating the overall dimensions of the pool.
Image: Diagram illustrating the water depth of the pool.
Image: Diagram illustrating the water capacity of the pool.
Garantía e Soporte
The INTEX Easy Set Inflatable Swimming Pool comes with a 180-Day Manufacturer Limited Warranty. For any questions regarding use, installation, service needs, or warranty claims, please contact INTEX customer service. Their dedicated team is available via phone, chat, or email to assist you.
For further assistance, please refer to the contact information provided in your product packaging or visit the official INTEX websitio.
Vídeos de produtos
No official product videos with seller creator type were provided in the product data. Please refer to the written instructions and images for guidance.
