Manual de instrucións da base da cadeira de coche para bebés Chicco KeyFit

1. Produto rematadoview

The Chicco KeyFit Infant Car Seat Base is designed for secure and accurate installation in your vehicle. This base is compatible with all Chicco KeyFit and KeyFit 30 infant car seats (sold separately).

Image 1: Chicco KeyFit Infant Car Seat Base, showing its overall design and components.

2. Configuración e instalación

Proper installation is crucial for the safety of your child. The KeyFit base offers two primary installation methods: using the vehicle's LATCH system or the vehicle's seat belt.

2.1. Pasos previos á instalación

• Ensure your vehicle's seating position is suitable for a rear-facing infant car seat base.
• Consult your vehicle's owner's manual for specific car seat installation guidelines and LATCH anchor locations.

2.2. Adjusting the Recline Angle (ReclineSure Leveling Foot)

The ReclineSure leveling foot helps achieve the proper recline angle for your infant car seat base. This is essential for your child's safety and comfort.

1. Place the car seat base on the vehicle seat.
2. Locate the ReclineSure leveling foot adjustment handle, typically found at the front of the base.
3. Press the adjustment handle and rotate the leveling foot to raise or lower the front of the base until the RideRight bubble level indicator shows the bubble within the green zone.

Image 2: Close-up of the RideRight bubble level indicator, showing the green zone for correct recline.

2.3. LATCH Installation (SuperCinch Tightener)

The SuperCinch LATCH Tightener provides a secure installation with minimal effort.

1. Locate your vehicle's lower LATCH anchors.
2. Extend the LATCH connectors from the car seat base.
3. Attach both LATCH connectors to the vehicle's lower anchors. Ensure they click securely into place.
4. Press down firmly on the car seat base while pulling the SuperCinch LATCH Tightener strap to remove slack from the LATCH belt.
5. Verify the installation by checking that the base does not move more than one inch side-to-side or front-to-back at the belt path.

Image 3: Demonstrates the use of the SuperCinch LATCH tightener for a secure installation.

2.4. Vehicle Seat Belt Installation

For vehicles without LATCH anchors, or if preferred, use the vehicle's seat belt.

1. Route the vehicle's lap and shoulder belt through the designated belt path on the car seat base.
2. Abróchese o cinto de seguridade.
3. Engage the integrated lock-offs on the base to secure the seat belt.
4. Press down firmly on the car seat base while pulling the shoulder belt to remove all slack.
5. Verify the installation by checking that the base does not move more than one inch side-to-side or front-to-back at the belt path.

Image 4: Illustrates the process of installing the car seat base using the vehicle's seat belt.

3. Operating the Car Seat Base

Once the base is securely installed, attaching and detaching the infant car seat is a simple process.

3.1. Attaching the Infant Car Seat

1. Align the infant car seat with the base.
2. Lower the car seat onto the base until it clicks securely into place.
3. Gently pull up on the car seat to ensure it is firmly attached to the base.

Image 5: Shows an infant car seat being clicked into the securely installed base.

3.2. Detaching the Infant Car Seat

1. Locate the release handle on the back of the infant car seat.
2. Squeeze the release handle and lift the infant car seat straight up from the base.

4. Mantemento

Regular maintenance ensures the longevity and cleanliness of your car seat base.

4.1. Instrucións de limpeza

• The car seat base can be wiped clean with a damp pano e xabón suave.
• Non use produtos de limpeza ou disolventes abrasivos.
• Refer to your infant car seat's manual for cleaning instructions for fabric components, as they may be removable and machine-washable.

4.2. Inspección

• Periodically inspect the base for any signs of damage, wear, or missing parts.
• Ensure all straps, buckles, and adjusters are functioning correctly.

5 Solución de problemas

If you encounter issues during installation or use, refer to these common troubleshooting tips.

5.1. Base is Not Level

• Re-adjust the ReclineSure leveling foot until the bubble in the RideRight indicator is within the green zone.
• Ensure the vehicle seat is not excessively reclined or angled.

5.2. Base is Not Secure

• For LATCH installation, ensure the SuperCinch Tightener strap is pulled taut while pressing down on the base.
• For seat belt installation, ensure the vehicle's seat belt is fully tightened and the integrated lock-offs are engaged.
• Check that the base does not move more than one inch in any direction at the belt path.

5.3. Infant Car Seat Not Clicking into Base

• Ensure the infant car seat is correctly aligned with the base.
• Check for any obstructions between the car seat and the base.
• Apply firm, even pressure when lowering the car seat onto the base.

6. Especificacións

7. Garantía e soporte

7.1. Exención de responsabilidade legal

NO EVENT, REGARDLESS OF CAUSE, SHALL CompanyC BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER ARISING UNDER BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND WHETHER BASED ON THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

7.2. Further Assistance

For additional support, warranty information, or to purchase replacement parts, please visit the official Chicco websitio ou póñase en contacto co seu departamento de atención ao cliente.