KING W2020-W

King W2020-W Electric Wall Heater

Manual de usuario

Introdución

This manual provides essential instructions for the safe installation, operation, and maintenance of your King W2020-W Electric Wall Heater. Please read all instructions carefully before installation and use to ensure proper function and to prevent personal injury or property damage. Keep this manual for future reference.

King W2020-W Electric Wall Heater front view

Imaxe 1: Fronte view of the King W2020-W Electric Wall Heater, showing the white grille and compact design.

Características principais:

Información importante de seguridade

AVISO: Para reducir o risco de incendio, descarga eléctrica ou lesións, observe o seguinte:

Contido do paquete

Upon opening the package, verify that all components are present and undamaged. If any parts are missing or damaged, do not attempt to install or operate the heater. Contact customer support immediately.

Instalación e Configuración

IMPORTANTE: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Incorrect installation can lead to fire, electric shock, or injury.

  1. Escolla localización: Select a wall location that is clear of obstructions and combustible materials. Ensure there is adequate clearance around the heater as specified in local codes and the heater's labeling. The heater is designed for indoor use.
  2. Preparar a abertura na parede: Create a wall opening suitable for the heater's dimensions (refer to specifications). Ensure the opening is structurally sound to support the heater's weight.
  3. Cableado: Turn off power at the main circuit breaker before beginning any wiring. Connect the heater to a dedicated 208V circuit. Follow the wiring diagram provided with the unit and adhere to all electrical codes. This model supports dual wattage (2000W/1000W); ensure correct wiring for your desired wattagconfiguración.
  4. Montaxe: Securely mount the heater housing into the wall opening using appropriate fasteners. Ensure the unit is level and flush with the wall surface.
  5. Instalar a grella: Once wiring and mounting are complete, attach the front grille to the heater housing.
  6. Encendido: Restablecer a corrente no disxuntor principal.
Diagram showing King W2020-W Electric Wall Heater components and dimensions

Imaxe 2: Explosión view of the King W2020-W Electric Wall Heater, illustrating the heater housing, finned grille, and internal components, along with key dimensions.

Vídeo de instalación:

Vídeo 1: Un overview of the King W-Series Wall Heater, demonstrating its features and applications. This video provides visual context for the product, including its design and how it fits into various settings.

Instrucións de funcionamento

The King W2020-W Electric Wall Heater features adjustable temperature control for personalized comfort.

  1. Activar/Desactivar: The heater is typically controlled by a wall-mounted thermostat (sold separately or integrated, depending on model variant). Turn the thermostat to the desired setting to activate the heater. Turn it to the lowest setting or "OFF" to deactivate.
  2. Axuste da temperatura: Rotate the thermostat dial (if present) or use the thermostat controls to set your preferred room temperature. The heater will cycle on and off to maintain the set temperature.
  3. Dual Wattage (se corresponde): If your unit is wired for dual wattage, ensure the correct wattage (2000W or 1000W) is selected during installation based on your heating requirements. This setting is typically fixed during wiring and not user-adjustable during operation.

For optimal performance, avoid placing objects directly in front of the heater that could obstruct airflow.

Mantemento

Regular maintenance ensures efficient and safe operation of your heater. Always disconnect power at the circuit breaker before performing any maintenance.

Resolución de problemas

If your heater is not operating correctly, consult the following table before contacting service.

ProblemaCausa posibleSolución
O quentador non se acende.No power to the unit; thermostat set too low; circuit breaker tripped; Smart Limit Protection activated.Check circuit breaker; ensure thermostat is set above room temperature; reset Smart Limit Protection by turning off power for a few minutes and then restoring.
O quentador produce calor insuficiente.Room size too large for heater; thermostat set too low; airflow obstructed.Ensure heater wattage is appropriate for room size; increase thermostat setting; clear any obstructions from the heater's grille.
O quentador acéndese e apágase con frecuencia.Thermostat sensing incorrect room temperature; heater is oversized for the room.Relocate thermostat if external; ensure proper heater sizing for the space.
Unusual noises from heater.Loose components; dust buildup on fan.Disconnect power and inspect for loose parts; clean fan and internal areas. If noise persists, contact a qualified technician.

Especificacións

CaracterísticaDetalle
Número de modeloW2020-W
MarcaREI
Voltage208 voltios
Wattage2000 Watts (Dual Wattage: 2000W/1000W)
CorBranco
Tipo de montaxeWall Mount (Rack Mount form factor)
Uso interior/exteriorInterior
Cobertura de calefacciónAta 200 metros cadrados
Tipo de combustibleEléctrico
Características especiaisAdjustable Temperature, Overheat Protection (Smart Limit Protection)
Dimensións do produto9 x 4 x 12 polgadas
Peso do elemento8 libras
CertificaciónListado UL

Garantía e Soporte

This King W2020-W Electric Wall Heater comes with a 1 ano de garantía desde a data de compra, cubrindo defectos de materiais e fabricación en condicións de uso normal.

For warranty claims, technical support, or to purchase replacement parts, please contact King Electric customer service. Refer to the official King Electric websitio para obter a información de contacto máis actualizada.

Fabricante: Rei Eléctrico

Documentos relacionados - W2020-W

Preview King W Fan Force Electric Space Heater Installation and Operating Manual
Comprehensive installation, operation, maintenance, and troubleshooting guide for the King W Fan Force Electric Space Heater. Includes safety warnings, wiring diagrams, and warranty information.
Preview Guía de instalación do calefactor King serie KCV Cove
Instrucións oficiais de instalación para o quentador de encova King serie KCV (modelo KCV1202), que detallan as precaucións de seguridade, a configuración eléctrica, a montaxe, o cableado e o mantemento.
Preview Quentador eléctrico King serie W: guía de instalación, funcionamento e mantemento
Guía completa para os quentadores eléctricos da serie King W, que abrangue a instalación, o cableado, o funcionamento, os avisos de seguridade, a resolución de problemas, o mantemento e a información sobre a garantía.
Preview Guía de instalación e mantemento do quentador de parede King serie W
Guía completa de instalación, mantemento, funcionamento e resolución de problemas para o quentador de parede King serie W. Inclúe instrucións de seguridade, diagramas de cableado, selección de localización e consellos para a resolución de problemas.
Preview Guía de instalación, seguridade e cableado do calefactor de convección King PX ComfortCraft
Esta guía ofrece instrucións de seguridade esenciais, procedementos de instalación paso a paso, diagramas de cableado e consellos para a resolución de problemas para os modelos de calefactor forzado con ventilador King PX ComfortCraft (1215, 2017, 2417).
Preview Calentador compacto King KBP serie ECO2S+: eficiencia enerxética 2-Stage Calefacción
Información detallada sobre o calefactor compacto King KBP da serie ECO2S+, con control electrónico ECO2S+ de aforro de enerxía, 2 segundostagcalefacción electrónica, detección remota da temperatura e opcións de instalación versátiles. Inclúe especificacións, información de pedidos e detalles de enxeñaría.