Progress Lighting P5607-09 Outdoor Wall Lantern Instruction Manual

Introdución

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P5607-09 Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: Progress Lighting P5607-09 Outdoor Wall Lantern. This image displays the complete fixture, featuring a brushed nickel finish, clear flat glass panels, and a single exposed bulb.

Información importante de seguridade

AVISO: Risco de descarga eléctrica. Desconecte a alimentación na caixa de fusibles ou no disyuntor antes da instalación ou do mantemento. Consulte cun electricista cualificado se non ten dúbidas sobre o proceso de instalación.

• Todas as conexións eléctricas deben estar de acordo cos códigos e as ordenanzas locais ou co Código Eléctrico Nacional (NEC).
• Use UL or ETL listed wire connectors suitable for the size, type, and number of conductors.
• Do not install this fixture in wet locations unless specifically rated for such use. This fixture is rated for outdoor use.
• Ensure the fixture is securely mounted to a structural element.
• Non exceda a potencia máximatage especificado para a lámpada.
• Always handle glass components with care.

Contido do paquete

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product.

• Outdoor Wall Lantern Fixture (Model P5607-09)
• Ferraxes de montaxe (parafusos, porcas para cables, placa de montaxe)
• Folla de instalación
• Clear Flat Glass Panels

Image: Line drawing of the P5607-09 fixture, showing its basic outline and internal components. This diagram helps identify the model number and general structure.

Especificacións

Instalación e colocación

This fixture is designed for outdoor wall mounting. Refer to the included "Installation Sheet" for detailed step-by-step wiring and mounting instructions. Always ensure power is disconnected at the circuit breaker before beginning any electrical work.

Fixture Sizing and Placement Guidelines

Proper sizing and placement are crucial for optimal aesthetic and functional lighting. Consider the following guidelines:

Iluminación de entrada

• Altura do aparello: Select fixtures that measure 1/4 to 1/3 of the door's height.
• Altura de montaxe: Mount the center of the fixture at eye level, approximately 5.5 to 6 feet from the ground.
• Espazamento: For double doors or wider entryways, mount lights on either side, 8 to 10 feet apart.

Image: A diagram illustrating how to size wall lanterns for an entryway. It shows a door and a wall lantern, with text indicating that wall lanterns should measure 1/4 the height of the door. An example is provided: a 96-inch door requires a 24-inch fixture height.

Image: An architectural drawing of a house front, demonstrating the recommended placement of two 24-inch tall wall lanterns flanking a 96-inch tall front door. This visually reinforces the 1/4 door height rule for fixture sizing.

Garage Lighting

• Single Car Garage: Use a single wall lantern to illuminate.
• Two or More Car Garages: Mount lights on either side of the garage doors, or across the top of the doors for even illumination.

Image: An architectural drawing of a house with a garage, illustrating the placement of two 24-inch tall wall lanterns flanking a 16-foot wide garage door. The text indicates that for a 16-foot door, a 24-inch height for each fixture is appropriate, following the 0.25 multiplier rule.

Operación

Once properly installed and wired, your P5607-09 Outdoor Wall Lantern operates like any standard outdoor light fixture. It can be controlled by a wall switch, dimmer switch (if using dimmable bulbs), or an external timer/photocell system (not included) connected to the circuit.

• Asegúrese de que o tipo de lámpada e a potencia correctastage (up to 100W incandescent, medium base) are used.
• For optimal performance and energy efficiency, consider using LED bulbs compatible with outdoor fixtures.

Mantemento

Limpeza

• Desconecte sempre a alimentación antes de limpar.
• Para limpar o aparello, limpeo cun pano suave eamp pano.
• Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• Para os paneis de vidro, pódese usar un limpador de cristais suave, aplicado primeiro nun pano e non directamente na luminaria.

Substitución da lámpada

• Ensure the power is turned off and the bulb has cooled completely before attempting to replace it.
• Carefully unscrew the old bulb and screw in a new medium base (E26) bulb, not exceeding 100 watts.
• Ensure the glass panels are securely re-installed after bulb replacement.

Resolución de problemas

Garantía e soporte

This Progress Lighting fixture comes with a Garantía limitada de 1 anos. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support. For warranty claims or technical assistance, please contact Progress Lighting customer service.

For additional product information or support, visit the Progress Lighting Store.

Recursos adicionais

Mostra de produtos