Introdución
The IDEAL 89-212 Terminal Strip is a robust 12-circuit electrical connector designed for secure and reliable wire termination. It features a rugged base to prevent breakage and corrosion-resistant surface plates with No.8 philslot screws, ensuring long-term durability. This terminal strip is rated for up to 600-Volt and 30A applications, making it suitable for various industrial and home improvement electrical connections.
Información de seguridade
Always observe standard electrical safety precautions when working with terminal strips and electrical wiring. Failure to do so may result in serious injury or damage to property.
- Ensure power is disconnected at the source before installation, maintenance, or troubleshooting.
- Empregar equipos de protección individual (EPI) axeitados, como luvas illantes e lentes de seguridade.
- Verificar voltage and current ratings of the terminal strip are compatible with your application. This unit is rated for up to 600 Volts and 30 Amps.
- All wiring should comply with local and national electrical codes.
- Do not exceed the specified torque rating of 16-Inch-Pound for the screws.
- Este produto pode conter substancias químicas que o Estado de California sabe que causan cancro e defectos conxénitos ou outros danos reprodutivos (advertencia da Proposición 65).
Produto rematadoview
Figure 1: The IDEAL 89-212 Terminal Strip, showing its black housing and screw terminals.
The IDEAL 89-212 is a 12-circuit screw terminal strip designed for efficient and secure electrical connections. Each circuit consists of a metal terminal block with two philslot screws for securing wires, separated by a rugged black plastic housing.
Características principais:
- Torque Rating of 16-Inch Pound
- Rugged base eliminates breakage
- Center spacing of 0.562-Inch (14.3mm)
- Accepts up to No.10 AWG wire
- Rated up to 600-Volt, 30A
Especificacións
| Especificación | Valor |
|---|---|
| Marca | IDEAL |
| Número de modelo | 89-212 |
| Valoración actual | 30 Amps |
| Voltage Avaliación | 600 voltios |
| Número de contactos | 12 |
| Tipo de conector | Parafuso |
| Tipo de montaxe | Superficie |
| Material | Cobre (terminais), plástico (carcasa) |
| Cor | Negro |
| Pitch do elemento | 0.56 polgadas (14.3 mm) |
| Wire Gauge Accepted | Up to No.10 AWG |
| Peso do elemento | 4.8 onzas |
| Dimensións do produto | 4 x 2 x 1 polgadas |
| Certificacións | CSA, UL |
Configuración
Follow these steps for proper installation of the terminal strip:
- Desconexión de alimentación: Before beginning any installation, ensure that all power to the circuit is completely disconnected at the main breaker or fuse box. Verify with a voltagprobador.
- Montaxe: Secure the terminal strip to a stable, non-conductive surface using appropriate fasteners through the mounting holes provided at each end of the strip. Ensure it is firmly attached to prevent movement.
- Preparación do cable: Strip approximately 3/8 to 1/2 inch of insulation from the ends of the wires to be connected. Ensure the wire strands are neatly twisted if using stranded wire.
- Inserción do cable: Loosen the philslot screws on the desired terminal circuits. Insert the prepared wire ends fully into the terminal openings beneath the screws.
- Conexións seguras: Tighten the philslot screws firmly to secure the wires. Apply a torque of up to 16-Inch-Pound. Do not overtighten, as this can damage the terminal or wire. Ensure no loose strands are exposed.
- Verificación: After all connections are made, visually inspect each terminal to confirm wires are securely fastened and there are no exposed conductors that could cause a short circuit.
Instrucións de funcionamento
Once installed, the IDEAL 89-212 Terminal Strip operates passively as a connection point for electrical circuits. Its primary function is to provide a secure and organized method for connecting multiple wires within a system.
- The terminal strip facilitates the distribution of power or signals from one source to multiple destinations, or vice-versa.
- Ensure that the total current flowing through any single terminal or the entire strip does not exceed its rated capacity (30 Amps).
- Accessory jumpers are available for creating common connections across multiple terminals if required for your application.
Mantemento
The IDEAL 89-212 Terminal Strip requires minimal maintenance. Regular inspection is recommended to ensure continued safe and reliable operation.
- Inspección periódica: Periodically inspect the terminal strip for any signs of damage, discoloration, or loose connections. This should be done with power disconnected.
- Limpeza: If necessary, gently clean the exterior of the terminal strip with a dry, lint-free cloth. Do not use liquid cleaners or solvents.
- Comprobación de estanqueidade: Re-check the tightness of the screw terminals annually, especially in environments subject to vibration or significant temperature fluctuations. Ensure power is off before checking.
- Condicións ambientais: Ensure the terminal strip is not exposed to excessive moisture, dust, or corrosive substances beyond its intended operating environment.
Resolución de problemas
If you encounter issues with your IDEAL 89-212 Terminal Strip, consider the following common troubleshooting steps:
- Sen alimentación/conexión intermitente:
- Check Wire Connections: Ensure all wires are securely fastened under the screws. Loose connections are a common cause of intermittent power.
- Verify Wire Stripping: Confirm that enough insulation was stripped to allow good contact with the terminal, but not so much that bare wire is exposed outside the terminal.
- Inspeccionar os cables: Check for damaged or broken wires leading to or from the terminal strip.
- Sobrequecemento/decoloración:
- Comprobar carga: Ensure the current load does not exceed the 30 Amp rating of the terminal strip. Overloading can cause overheating.
- Inspeccionar conexións: Loose connections can create resistance and generate heat. Re-tighten screws if necessary (with power off).
- Medidor de arame: Confirm that the wire gauge used is appropriate for the current load and is not undersized.
- Danos físicos:
- If the terminal strip housing is cracked or broken, or if terminals are corroded beyond cleaning, the unit should be replaced immediately to ensure safety and proper function.
If issues persist after troubleshooting, consult a qualified electrician or contact IDEAL customer support.
Garantía e Soporte
For information regarding warranty coverage, technical support, or replacement parts for your IDEAL 89-212 Terminal Strip, please refer to the official IDEAL Industries websitio web ou póñase en contacto directamente co seu departamento de atención ao cliente. Garde o recibo da compra como proba de compra.
Nota: Os termos e condicións específicos da garantía poden variar segundo a rexión e o produto.
