Introdución
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Schlage FA358STN609 Sutton Exterior Handleset with Deadbolt. Please read these instructions carefully before installation and use to ensure proper function and longevity of your product.
Contido do paquete
Before beginning installation, verify that all components are present. The FA358STN609 package includes the exterior half of the handleset and deadbolt components. Nota: This unit requires a separate FA359 or F359 interior handleset to complete the full assembly.
- Exterior Handleset (Lever/Knob and Trim)
- Exterior Deadbolt Cylinder
- Hardware de montaxe
- Parafusos de instalación
- Chaves
Configuración e instalación
Proper installation is crucial for the security and functionality of your handleset. Follow these steps carefully:
- Preparación da porta: Ensure your door has the necessary bore holes. A minimum 4-inch center-to-center door preparation is required for this two-piece handleset model.
- Instalar o pestillo do pestillo: Insira o pestillo do pestillo no bordo da porta. Asegúreo cos parafusos proporcionados.
- Install Deadbolt Cylinder: Place the exterior deadbolt cylinder through the top bore hole.
- Instalar o conxunto de manillar exterior: Position the exterior handleset through the lower bore hole.
- Adjust Bottom Through-Bolt: The patented adjustable bottom through-bolt can move up and down by 1 1/2 inches. Align it with the pre-existing hole in your door for a secure fit.
- Secure Handleset: Attach the interior handleset (FA359 or F359, sold separately) to the exterior components using the provided screws, ensuring all parts are aligned and tightened securely.
- Proba de funcionamento: After installation, test the deadbolt and handleset operation with the key and from the interior to ensure smooth locking and unlocking.
Image: Schlage FA358STN609 Sutton Exterior Handleset with Deadbolt in Antique Brass finish. This image shows the complete exterior assembly of the handleset, including the deadbolt cylinder and the lower handle with its decorative plate.
Instrucións de funcionamento
The Schlage FA358STN609 handleset provides secure entry and exit for your door.
- Locking the Deadbolt: From the exterior, insert the key into the deadbolt cylinder and turn to extend the bolt into the door frame. From the interior, rotate the thumbturn to extend the bolt.
- Unlocking the Deadbolt: From the exterior, insert the key into the deadbolt cylinder and turn to retract the bolt. From the interior, rotate the thumbturn to retract the bolt.
- Operating the Handleset Latch: From the exterior, turn the handle to retract the latch bolt. From the interior, turn the handle to retract the latch bolt.
Mantemento
To ensure the longevity and smooth operation of your Schlage handleset, follow these maintenance guidelines:
- Limpeza: Limpar o conxunto de asas regularmente cun pano suave eamp pano. Evite produtos de limpeza abrasivos, solventes ou produtos químicos agresivos, xa que poden danar o acabado.
- Lubricación: Periodically apply a small amount of graphite-based lubricant to the keyway and internal mechanisms to maintain smooth operation. Do not use oil-based lubricants, as they can attract dust and debris.
- Inspección: Periodically check all screws and mounting hardware for tightness. Tighten any loose fasteners to prevent wobbling or misalignment.
Resolución de problemas
Se tes problemas co teu mango, consulta os seguintes problemas e solucións comúns:
| Problema | Causa posible | Solución |
|---|---|---|
| Key turns but deadbolt does not retract/extend. | Misalignment of deadbolt mechanism or worn internal components. | Check for obstructions in the door frame. Ensure the deadbolt latch is properly installed. If the issue persists, professional assistance may be required. |
| A asa está solta ou treme. | Parafusos de montaxe soltos. | Tighten all visible mounting screws. Ensure the adjustable bottom through-bolt is secure. |
| Difficulty inserting or turning key. | Dirt/debris in keyway or lack of lubrication. | Apply graphite lubricant to the keyway. Clean the key if it appears dirty. Do not force the key. |
Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | FA358STN609 |
| Marca | ESCALA |
| Material | Latón, Metal |
| Cor/Acabado | Latón antigo |
| Tipo de bloqueo | Key Lock (Deadbolt) |
| Característica especial | Adjustable bottom through-bolt (1 1/2" range) |
| Required Door Prep | 4" minimum center-to-center for two-piece model |
| Peso do elemento | 3 libras (aprox.) |
| UPC | 043156822447 |
Información da garantía
This Schlage handleset is backed by a Garantía mecánica e de acabado de por vida. This warranty covers defects in material and workmanship for the lifetime of the product, provided it is installed and maintained according to these instructions. For specific terms and conditions, please refer to the official Schlage warranty documentation or contact customer support.
Atención ao cliente
For further assistance, technical support, or warranty claims, please visit the official Schlage website or contact their customer service department. Keep your model number (FA358STN609) and purchase information readily available when contacting support.
Schlage Official Websitio: www.schlage.com
