Fluke 1653B Multifunction Installation Tester User Manual

1. Introdución e finalview

The Fluke 1653B is a VDE-certified multifunction installation tester designed to verify the safety of electrical installations in private, commercial, and industrial applications. This device offers a comprehensive suite of tests including insulation resistance, loop impedance, RCD/FI testing, earth resistance, and phase rotation. It features a digital display, internal memory, and a PC interface for documentation and reporting.

Características principais:

• Digital display for clear readings.
• Limit value display for quick pass/fail indication.
• Insulation resistance measurement.
• Measurement of resistances of insulating floors and walls.
• Low-ohm measurement for continuity.
• Earth resistance measurement.
• Loop impedance measurement, including loop measurement without RCD/FI activation.
• Vol. De redetage medición.
• Determination of short-circuit current/overcurrent protection installations.
• RCD/FI testing, including type A RCDs and increasing earth current tests.
• Phase rotation test.
• Internal memory for storing measurement values.
• PC interface for data transfer and reporting.

Figura 1: Fronte view of the Fluke 1653B Multifunction Installation Tester. The device is yellow and black, featuring a large green digital display showing measurement values (e.g., 0.23 Ω and 1000 A). Control buttons such as 'TEST', 'ZERO', 'MEMORY', and function buttons (F1-F4) are visible on the left side, while a rotary dial for selecting measurement modes (e.g., Insulation, Loop, RCD, Earth, Phase Rotation, Volts) is on the right.

2. Configuración

2.1. Instalación da batería

The Fluke 1653B is battery-powered. Before initial use, or when the low battery indicator appears, ensure fresh batteries are installed. Refer to the battery compartment cover for correct polarity and battery type (typically AA or C cells, depending on the model variant).

1. Localiza o compartimento da batería na parte traseira do dispositivo.
2. Open the battery compartment cover using a screwdriver or coin if necessary.
3. Insert the required number of batteries, observing the correct polarity (+/-) as indicated inside the compartment.
4. Peche ben a tapa do compartimento da batería.

2.2. Acendido inicial

Press the green power button (labeled with a circle and vertical line) located near the bottom left of the control panel to turn on the device. The digital display will illuminate and perform a self-test.

3. Instrucións de funcionamento

This section provides general guidance for operating the Fluke 1653B. Always refer to the on-screen prompts and safety warnings during operation.

3.1. Selecting a Measurement Function

Use the large rotary dial on the right side of the device to select the desired measurement function. The selected function will be indicated on the display.

• VOLTS (V.): For measuring AC/DC voltage.
• INSULATION (R_ISO): For insulation resistance tests.
• CONTINUITY (R_LO): For low-ohm continuity tests.
• LOOP (Z_L NO TRIP): For loop impedance measurement without tripping RCDs.
• LOOP (Z_L HI CURRENT): For high current loop impedance measurement.
• ΔT RCD TIME: For RCD trip time measurement.
• I_ΔN RCD TRIP: For RCD trip current measurement.
• R_E TERRA: For earth resistance measurement.
• ROTACIÓN DE FASE: For determining phase sequence.

3.2. Realización dunha proba

Once a function is selected and test leads are connected appropriately, press the large PROBA button (located on the bottom left) to initiate the measurement. The display will show the measurement result.

O CERO button can be used to null out lead resistance for accurate low-ohm measurements.

3.3. Using Memory Functions

The device includes internal memory for storing measurement values. Use the MEMORIA button and the arrow keys to navigate and save readings. Refer to the on-screen prompts for specific memory operations.

• Preme MEMORIA to access memory functions.
• Use the up/down arrow keys to scroll through stored readings or memory locations.
• Function buttons (F1-F4) may provide additional options related to memory, such as saving, recalling, or deleting data.

3.4. PC Interface

The Fluke 1653B features a PC interface for documentation and reporting. Connect the device to a computer using the appropriate cable (sold separately) and use Fluke's software (if applicable) to download and analyze stored data.

4. Mantemento

Proper maintenance ensures the longevity and accuracy of your Fluke 1653B.

4.1. Limpeza

Limpar o instrumento casing con anuncioamp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from any electrical circuits before cleaning.

4.2. Almacenamento

When not in use for extended periods, remove the batteries to prevent leakage. Store the device in a dry, cool place, away from direct sunlight and extreme temperatures.

4.3. Calibración

For continued accuracy, it is recommended to have the Fluke 1653B calibrated periodically by an authorized service center. Refer to Fluke's official documentation for recommended calibration intervals.

5 Solución de problemas

This section provides solutions to common issues. For more complex problems, contact Fluke customer support.

6. Especificacións

The following specifications are for the Fluke 1653B Multifunction Installation Tester:

• Número de modelo: Fluke 1653B
• Fabricante: REDES FLUKE
• Certificación: VDE
• Tipo de visualización: Dixital
• Fonte de enerxía: Funciona con pilas
• Cor: Negro/Amarelo
• Tipo de medida: Multimeter (Multifunction Tester)
• UPC: 095969460873
• Primeira data dispoñible: 15 de xaneiro de 2020

7. Garantía e soporte

For warranty information, technical support, or service, please contact Fluke Networks directly or visit their official websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.

Recursos en liña: For the most up-to-date information, FAQs, and software downloads, please visit the official Fluke Networks support page.