OR801118 Powerzone Power Strip User Manual

Produto rematadoview

The POWER ZONE OR801118 Power Strip is designed to convert a single wall outlet into six grounded outlets, providing expanded power access for multiple devices. It features a built-in circuit breaker for overload protection, ensuring safety and reliability for your electrical equipment.

This power strip is rated for 15 Amps, 125 Volts, and 1875 Watts, making it suitable for a variety of household and office electronics. It is UL listed, indicating compliance with safety standards.

POWER ZONE OR801118 Power Strip with six outlets, a red ON/OFF switch, and a power cord with a straight plug.

Figure 1: The POWER ZONE OR801118 Power Strip, showing its six outlets, integrated circuit breaker switch, and attached power cord with a standard 3-prong plug.

Información de seguridade

Lea e comprenda todas as instrucións de seguridade antes de usar este produto. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios ou lesións graves.

Non exceda as clasificacións eléctricas de 15 Amps, 125 Volts, or 1875 Watts. Overloading the power strip can cause the circuit breaker to trip or lead to fire hazards.
This product is designed for indoor use only. Do not expose to moisture or use in wet environments.
Do not plug one power strip into another. This is known as "daisy-chaining" and can lead to electrical overload.
Asegúrate de que o enchufe estea completamente inserido na toma de corrente. Unha conexión solta pode provocar sobrequecemento.
Keep children and pets away from the power strip and connected devices.
Non desmontes nin modifiques a regleta. Non contén pezas que o usuario poida reparar no seu interior.
If the circuit breaker trips, unplug some devices before resetting the switch.

Configuración

Unpack the Power Strip: Carefully remove the power strip from its packaging. Inspect it for any signs of damage. Do not use if damaged.
Escolle unha localización: Select a dry, indoor location away from water sources, heat, and direct sunlight. Ensure there is adequate ventilation around the power strip and connected devices.
Enchufe na toma de parede: Insert the power strip's straight plug firmly into a standard 3-prong, 125V grounded wall outlet. Ensure the connection is secure.
Conectar dispositivos: Plug your electronic devices into the six available outlets on the power strip. Ensure that the total wattagA potencia de todos os dispositivos conectados non supera os 1875 vatios.
Activar enerxía: If the power strip has an ON/OFF switch (often integrated with the circuit breaker), ensure it is in the "ON" position. The switch is typically red and clearly marked.

Instrucións de funcionamento

The POWER ZONE OR801118 Power Strip is designed for simple operation.

Encendido/apagado: The power strip features a master ON/OFF switch, which also functions as a circuit breaker. To supply power to the connected devices, press the switch to the "ON" position. To cut power to all connected devices, press the switch to the "OFF" position.
Protección contra sobrecarga: In the event of an electrical overload (when the total current draw exceeds 15 Amps or 1875 Watts), the built-in circuit breaker will automatically trip, cutting power to all connected devices to prevent damage and fire hazards.
Resetting the Circuit Breaker: If the circuit breaker trips, first unplug some of the devices connected to the power strip to reduce the load. Then, push the circuit breaker switch back to the "ON" position to restore power. If the breaker continues to trip, consult the Troubleshooting section.

Mantemento

Regular maintenance helps ensure the longevity and safe operation of your power strip.

Limpeza: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or sprays directly on the power strip.
Inspección: Periodically inspect the power strip, its cord, and the plug for any signs of damage, such as frayed wires, cracks, or discoloration. If any damage is observed, discontinue use immediately and replace the unit.
Almacenamento: When not in use for extended periods, store the power strip in a cool, dry place, away from direct sunlight and extreme temperatures.

Resolución de problemas

Problema	Causa posible	Solución
Sen alimentación aos dispositivos conectados.	Power strip switch is OFF. O interruptor de circuito disparou. A toma de corrente non ten corrente. Power strip is damaged.	Asegúrese de que o interruptor de encendido/apagado estea na posición "ON". Reduce the load by unplugging some devices, then reset the circuit breaker. Test the wall outlet with another device. Check your home's circuit breaker panel. Discontinue use and replace the power strip.
O disyuntor salta con frecuencia.	Overload (too many devices or high-power devices). Faulty device connected. Internal fault in power strip.	Calcula a potencia totaltage of connected devices; ensure it's below 1875 Watts. Distribute devices across multiple outlets if possible. Unplug devices one by one to identify the faulty one. Discontinue use and replace the power strip.
Power strip feels hot.	Sobrecarga. Ventilación deficiente. Danos internos.	Immediately unplug all devices and the power strip from the wall. Reduce load. Ensure power strip is not covered or in an enclosed space. Discontinue use and replace the power strip.

Especificacións

Número de modelo	OU801118
Marca	ZONA DE ENERXÍA
Total de tomas de corrente	6
Voltage Avaliación	125 voltios
AmpCapacidade de eraaxe	15 Amps
Wattage Avaliación	1875 vatios
Formato de enchufe	Tipo B (3 puntas con conexión a terra)
Lonxitude do cordón	18 polgadas (aproximadamente, segundo a descrición)
Peso do elemento	9 onzas
Dimensións do produto (L x W x H)	11.88 x 9 x 8.75 polgadas
Certificacións	Listado UL
Usos recomendados	Apartment, Hotel, Office, Restaurant, TV (general purpose)

Garantía e Soporte

Specific warranty information is not provided in the product details. For warranty claims or technical support, please contact POWER ZONE customer service directly. Refer to the product packaging or the manufacturer's official websitio para os detalles de contacto.

It is recommended to retain your purchase receipt as proof of purchase for any warranty-related inquiries.

	Regleta de alimentación avanzada Greenlite de 5 tomas de corrente Nivel 1: características, instalación e garantía Información detallada sobre a regleta de enchufes avanzada Greenlite de 5 tomas de corrente de nivel 1, incluíndo as características do produto, a protección contra sobretensións, os tipos de tomas (sempre acesa, con interruptor, de control), as instrucións de instalación e a garantía limitada.
	Regleta de alimentación avanzada Greenlite Tier 1: características, especificacións e guía de instalación Información detallada sobre a regleta de alimentación avanzada Greenlite Tier 1, incluíndo a súa protección contra sobretensións, a funcionalidade da toma de control, a conmutación automática, as especificacións e as instrucións de configuración para o seu uso en TV e PC.
	Regleta de alimentación avanzada Greenlite Tier 1: Manual do usuario e guía de instalación Guía completa para a regleta de alimentación avanzada Greenlite Tier 1, que detalla as características, as especificacións, os avisos de seguridade e as instrucións de configuración para as configuracións de TV e PC.
	Regleta de alimentación avanzada Greenlite TIER 1 APS/T105USB con carga USB - Protección contra sobretensións Información detallada sobre a regleta de alimentación Greenlite TIER 1 Advanced (APS/T105USB), con 5 tomas de corrente, 2 USB-A, 1 USB-C, protección contra sobretensións e un disyuntor reiniciable. Inclúe características, instalación e garantía.
	CyberPower 6-Outlet Surge Protector CSB604/CSB606/CSB606W User Guide Detailed information on the CyberPower 6-Outlet Surge Protector models CSB604, CSB606, and CSB606W, including features, specifications, safety precautions, troubleshooting, and technical support.
	Serie Blaze PowerZone Connect: Guía de inicio rápido e manual de instalación Guía completa para instalar, configurar e operar a serie Blaze PowerZone Connect ampamplificadores, que abarcan os modelos 1002, 1502, 2004/2004D, 3004/3004D, 4008 e 6008. Inclúe a configuración, a conectividade de rede, o enrutamento de audio, as especificacións e a información de seguridade.

POWER ZONE OR801118