Behringer UFO202

Behringer U-PHONO UFO202 USB Audio Interface Instruction Manual

1. Introdución

The Behringer U-PHONO UFO202 is a compact, high-quality 2-input/2-output USB audio interface designed to convert analog audio sources, such as turntables and cassette players, into digital format. It features a built-in phono preamplifier, allowing direct connection of record players, and provides high-quality audio conversion for your computer. This manual provides essential information for the proper setup, operation, and maintenance of your UFO202.

2. Instrucións de seguridade

Please read and follow these safety instructions carefully to ensure safe operation and to prevent damage to the device or injury to yourself.

3. Características

The Behringer U-PHONO UFO202 offers the following key features:

4. Configuración

Follow these steps to set up your Behringer U-PHONO UFO202:

  1. Conectar ao ordenador: Connect the UFO202 to an available USB port on your computer using the integrated USB cable. The device is USB class-compliant and typically does not require special drivers for Windows, macOS, or Linux.
  2. Conectar a fonte de audio: Connect your analog audio source (e.g., turntable, cassette player, or other line-level device) to the RCA INPUT jacks on the UFO202. Ensure left (white) and right (red) channels are correctly matched.
  3. Ground Connection (for Turntables): If connecting a turntable, attach its ground wire to the GND terminal on the UFO202 to minimize hum and noise.
  4. Select Input Type: Use the PHONO/LINE switch on the UFO202 to select the appropriate input type for your source. Select FONO for turntables and LIÑA for cassette players or other line-level devices.
  5. Conectar auriculares: For monitoring, plug your headphones into the 1/4-inch PHONES jack. Adjust the VOLUME knob to control headphone output level.
  6. Connect to Playback System (Optional): If you wish to route the audio output to external speakers or an amplifier, connect the RCA OUTPUT jacks of the UFO202 to the corresponding inputs on your playback system.
Behringer U-PHONO UFO202 USB Audio Interface with RCA inputs and outputs, USB cable, and headphone jack.
Figura 1: Fronte view of the Behringer U-PHONO UFO202, showing the RCA inputs and outputs, USB cable, headphone jack, and volume control.
Behringer U-PHONO UFO202 USB Audio Interface with a closer view of the input/output connections and the PHONO/LINE switch.
Figura 2: De arriba abaixo view of the Behringer U-PHONO UFO202, highlighting the RCA input/output connections, the PHONO/LINE switch, and the GND terminal.

5. En funcionamento

Once the UFO202 is set up, you can begin using it for audio conversion and playback:

6. Mantemento

Proper maintenance ensures the longevity and optimal performance of your UFO202:

7 Solución de problemas

If you encounter issues with your UFO202, refer to the following troubleshooting tips:

ProblemaCausa posibleSolución
No sound output from headphones/speakers.Incorrect connections, low volume, incorrect software settings.Check all RCA and headphone connections. Increase the UFO202's VOLUME knob. Verify the UFO202 is selected as the output device in your computer's sound settings and audio software. Ensure the MONITOR switch is in the desired position.
No input signal detected.Incorrect input selection, source not playing, incorrect software settings.Ensure the PHONO/LINE switch matches your audio source. Confirm the analog source is playing. Verify the UFO202 is selected as the input device in your computer's sound settings and audio software.
Hum or buzzing noise.Ground loop, unshielded cables, electrical interference.Ensure the turntable's ground wire is connected to the UFO202's GND terminal. Try using different, shielded RCA cables. Avoid placing the unit near power supplies or other electronic devices that may cause interference.
Dispositivo non recoñecido polo ordenador.Faulty USB port/cable, operating system issue.Try connecting to a different USB port on your computer. Restart your computer. Ensure your operating system is up to date.

8. Especificacións

CaracterísticaDetalle
Entradas2 x RCA (Phono/Line switchable)
Saídas2 x RCA, 1 x 1/4" TRS Headphone
InterfaceUSB
Compatibilidade con SOWindows, macOS, Linux
Fonte de alimentaciónAlimentado por bus USB
Canles2
Número de modelo do produtoUFO202-BK

9. Garantía e soporte

Para obter información detallada sobre a garantía, o rexistro do produto e a asistencia técnica, visite a páxina web oficial de Behringer website or contact your local Behringer distributor. Keep your purchase receipt as proof of purchase for warranty claims.

You can find additional resources and contact information at the Behringer official websitio: www.behringer.com