JBL StagManual do usuario dos altofalantes de audio coaxial para coche e 602 de 6-1/2" e 2 vías

Introdución

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JBL Stage 602 6-1/2" 2-Way Coaxial Car Audio Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and optimal performance.

Características clave

• Tipo de altofalante: 6.5" Stage Series 2-Way Coaxial Car Speakers
• Material do cono: Injection-molded polypropylene cone for enhanced durability and sound quality.
• Tweeter: PEI Balanced Dome Tweeter for clear high-frequency reproduction.
• Impedancia: 4 ohms, optimized for compatibility with a wide range of car audio systems.
• Resposta en frecuencia: 55 - 22000 Hz, providing a broad audio spectrum.
• Sensibilidade: 91dB, ensuring efficient power conversion into sound.
• Manexo de potencia: 135W Peak / 45W RMS per speaker.
• Top-Mount Depth: 2-5/16" for flexible installation.

Contido do paquete

O teu JBL Stage 602 speaker package typically includes the following items:

• Two (2) JBL Stage 602 6-1/2" Coaxial Speakers
• Two (2) Speaker Grilles
• Mounting Hardware (screws, clips)
• Speaker Brackets (for various mounting options)
• Speaker Foam (for minimizing unwanted sounds/vibrations)
• Owner's Manual / Documentation

Configuración e instalación

Proper installation is crucial for optimal sound performance and speaker longevity. If you are unsure about any steps, it is recommended to seek professional assistance.

1. Precaucións de seguridade

• Desconecte a batería do vehículo antes de comezar calquera traballo eléctrico.
• Usar equipamento de seguridade axeitado, incluída protección ocular.
• Ensure all wiring is correctly connected to prevent damage to the speakers or vehicle's electrical system.
• Avoid overtightening screws to prevent stripping or damaging mounting surfaces.

2. Preparación para a instalación

1. Eliminar altofalantes existentes: Carefully remove the existing car audio speakers from their mounting locations (e.g., door panels, rear deck). This may involve removing trim panels, screws, and disconnecting wiring.
2. Comprobe o axuste: Compare the JBL Stage 602 speakers with the original speakers and the mounting location. Use the provided mounting brackets if necessary to ensure a secure fit.
3. Cableado: Identify the positive (+) and negative (-) speaker wires from your vehicle's audio system. Ensure proper polarity when connecting the new speakers.

3. Montaxe do altofalante

1. Altofalantes seguros: Place the JBL Stage 602 speakers into the prepared mounting locations. Use the provided screws to secure them firmly. If using mounting brackets, attach the brackets first, then the speakers to the brackets.
2. Aplicar escuma: Apply the included speaker foam around the speaker's edge where it meets the mounting surface. This helps to minimize vibrations and improve sound quality by creating a better seal.
3. Conectar cableado: Connect the vehicle's speaker wires to the terminals on the JBL Stage 602 speakers. Ensure the positive (+) wire connects to the positive terminal and the negative (-) wire connects to the negative terminal.
4. Instalar reixas: If desired, attach the speaker grilles over the speakers.
5. Remontar: Reassemble any removed trim panels or components.

4. Guía xeral de instalación

For a visual guide on upgrading car audio speakers, including insights into speaker components and mounting options, refer to the video below. This video provides general information applicable to JBL GTO series speakers, which share similar installation principles.

Funcionamento dos altofalantes

Once installed, your JBL Stage 602 speakers will operate as part of your vehicle's existing audio system. No specific operational controls are on the speakers themselves.

• Fonte de audio: Reproduce audio a través da unidade principal do teu coche (radio, reprodutor de CD, reprodutor multimedia).
• Control de volume: Adjust the volume using your head unit's controls.
• Controis de ton: Utilize your head unit's equalizer (EQ), bass, treble, and balance/fader controls to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
• Período de rodaxe: Allow a short break-in period (typically 10-20 hours of normal listening) for the speaker components to loosen up and achieve their optimal sound performance.

Mantemento e coidados

To ensure the longevity and continued performance of your JBL Stage 602 speakers, follow these maintenance guidelines:

• Limpeza: Limpe con coidado as grellas e os arredores do altofalante cun pano suave e seco. Evite o uso de produtos químicos agresivos ou produtos de limpeza abrasivos.
• Evitar a sobrecarga: Do not drive the speakers with an amplifier that exceeds their recommended RMS power handling (45W RMS per speaker) to prevent damage.
• Factores ambientais: Protect speakers from extreme temperatures, direct sunlight for prolonged periods, and excessive moisture.
• Inspección periódica: Periodically check the speaker cones and surrounds for any signs of damage or wear.

Resolución de problemas

If you experience issues with your speakers, consult the following common troubleshooting steps:

Especificacións

Garantía e Soporte

JBL Stage 602 speakers come with a 1 ano de garantía limitada. For warranty claims, technical support, or further assistance, please contact JBL customer service or visit the official JBL websitio.

Para obter máis información e asistencia sobre o produto, pode visitar o Tenda JBL en Amazon.