Marte 33490

Mars 33490 Heat Pump Defrost Thermostat User Manual

Modelo: 33490

1. Introdución

This manual provides instructions for the proper installation, operation, and maintenance of the Mars 33490 Heat Pump Defrost Thermostat. This device is designed to manage the defrost cycle of heat pump systems, ensuring efficient operation by sensing the temperature of the outdoor coil.

2. Características do produto

  • Designed specifically for heat pump defrost applications.
  • Features a 3/8 inch tube mounting mechanism for secure attachment.
  • Equipped with 54 inch leads for flexible and convenient wiring.
  • Activates (opens) at approximately 80°F (26.7°C) to terminate defrost.
  • Deactivates (closes) at approximately 30°F (-1.1°C) to initiate defrost.

3. Información de seguridade

Instrucións de seguridade importantes

Read all instructions carefully before installation or operation. Failure to follow these instructions could result in property damage, personal injury, or death.

  • Always disconnect power to the heat pump system at the circuit breaker before installing or servicing the thermostat.
  • Installation should be performed by a qualified HVAC technician or licensed electrician to ensure safety and proper function.
  • Asegúrese de que todo o cableado cumpra cos códigos e regulamentos eléctricos locais.
  • Do not operate the heat pump system if the thermostat or any associated components are visibly damaged.
  • This product may be subject to California Proposition 65. For more information, visit www.P65Warnings.ca.gov. Lavar as mans despois da manipulación.

4. Configuración e instalación

Guía de instalación

The Mars 33490 defrost thermostat is designed for secure mounting on a 3/8 inch diameter tube within the heat pump system.

  1. Desconexión de alimentación: Before commencing any work, ensure the main power supply to the heat pump unit is completely disconnected at the circuit breaker to prevent electrical shock.
  2. Lugar de montaxe: Identify a suitable 3/8 inch diameter tube on the heat pump's outdoor coil. This location should accurately reflect the coil's temperature for effective defrost control.
  3. Montaxe do termostato: Securely attach the thermostat to the selected 3/8 inch tube using its integrated mounting clip. Ensure there is good thermal contact between the thermostat's sensor and the tube for accurate temperature readings.
  4. Cableado: Connect the 54 inch leads of the thermostat into the heat pump's control circuit. Refer to the heat pump manufacturer's specific wiring diagram for correct connections. Typically, this thermostat is wired in series with the defrost control board's sensor input.
  5. Verificar conexións: Double-check all wiring connections to ensure they are secure and correctly terminated according to the wiring diagram.
  6. Restaurar enerxía: Once installation is complete and all connections have been verified, safely restore power to the heat pump system.
Mars 33490 Heat Pump Defrost Thermostat with 3/8 inch tube mount and wiring leads
Image 1: Mars 33490 Heat Pump Defrost Thermostat. This image shows the compact design of the thermostat, featuring its white cylindrical body, copper-colored base, metal mounting clip, and black electrical leads. The 3/8 inch tube mount is visible, designed for secure attachment to a heat pump's refrigerant line.
Lado view of Mars 33490 Heat Pump Defrost Thermostat showing wiring and mounting clip
Imaxe 2: Lateral view of the Mars 33490 Heat Pump Defrost Thermostat. This perspective highlights the robust metal mounting clip that secures the thermostat to a refrigerant tube, along with the entry point of the black wiring leads into the thermostat body. The product identification numbers are faintly visible on the white casing.

5. Funcionamento

Funcionamento funcional

The Mars 33490 is an automatic defrost thermostat that operates by sensing the temperature of the outdoor coil. It functions as follows:

  • When the coil temperature rises to approximately 80 °F (26.7 °C), the thermostat's internal switch will open. This signal typically indicates that the coil is clear of ice and signals the defrost cycle to terminate.
  • When the coil temperature drops to approximately 30 °F (-1.1 °C), the thermostat's internal switch will close. This action initiates or allows the defrost cycle to begin, provided other defrost conditions (e.g., time, pressure differential) are met by the heat pump's main control board.

This thermostat works in conjunction with the heat pump's main control board to ensure efficient defrosting, preventing excessive ice buildup on the outdoor coil and maintaining optimal heating efficiency.

6. Mantemento

Pautas de mantemento

The Mars 33490 Defrost Thermostat is designed for reliable, long-term operation and is generally maintenance-free. However, periodic inspection is recommended to ensure continued optimal performance.

  • Inspección anual: During routine heat pump maintenance, visually inspect the thermostat for any signs of physical damage, corrosion, or loose wiring connections.
  • Limpeza: Ensure the area around the thermostat is kept free from debris, dirt, leaves, or ice buildup that could interfere with accurate temperature sensing.
  • Montaxe segura: Verify that the thermostat remains securely mounted to the refrigerant tube to maintain proper thermal contact and accurate temperature readings.

If any damage is observed, or if the heat pump exhibits unusual defrost behavior (e.g., no defrost, continuous defrost), consult a qualified HVAC technician for diagnosis and repair.

7 Solución de problemas

Solución de problemas comúns

This section provides general guidance for common issues related to defrost thermostat operation. Always consult a qualified technician for complex diagnostics and repairs, especially when dealing with electrical components.

ProblemaCausa posibleSolución
Heat pump not defrostingDefrost thermostat failure (stuck open circuit)A qualified technician should test thermostat continuity. Replace if faulty.
Heat pump defrosts too frequently or infrequentlyImproper thermostat mounting, poor thermal contact, or faulty thermostatVerify secure mounting and good thermal contact with the refrigerant tube. A technician can test thermostat operation and replace if necessary.
Thermostat appears physically damagedPhysical impact, environmental exposure, or wearDisconnect power and replace the thermostat immediately to prevent further system issues.

8. Especificacións

Especificacións técnicas

  • Modelo: Marte 33490
  • Fabricante: Marte
  • Número de peza: 33490
  • Open Temperature: 80 °F (26.7 °C)
  • Close Temperature: 30 °F (-1.1 °C)
  • Tipo de montaxe: 3/8 inch Tube Mount
  • Lonxitude do cable: 54 polgadas
  • Dimensións do produto: Aproximadamente 5 x 3 x 2 polgadas (12.7 x 7.6 x 5.1 cm)
  • Peso do artigo: Aproximadamente 4 onzas (113 gramos)
  • Pilas necesarias: Non
  • Data de primeira dispoñibilidade: 20 de maio de 2010

9. Garantía e soporte

Información sobre a garantía e atención ao cliente

For specific warranty details regarding your Mars 33490 Heat Pump Defrost Thermostat, please refer to the documentation provided with your original purchase or contact Mars customer support directly.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact your authorized Mars dealer or visit the official Mars websitio para recursos de apoio.

Fabricante: Marte

Número de peza: 33490

ASIN: B003N6AB98

Documentos relacionados - 33490

Preview MARS SGF80S120D5S1A Single-StagLista de pezas para fornos de gas multiposición
Lista oficial de pezas para o MARS SGF80S120D5S1A Single-StagForno de gas multiposición. Este documento detalla os compoñentes, os nomes das pezas e as cantidades do forno AFUE da serie SE ao 80 %.
Preview MARS Geothermal & Commercial WSHP Accessories Catalog
This catalog from MARS details accessories for Geothermal and Commercial Water Source Heat Pump (WSHP) systems, including various flow centers, loop pumps, fittings, tools, controls, and hose kits designed for efficient and reliable operation.
Preview Manual de instalación e utilización do comando filaire MARS 7800-500
Guía completa para a instalación e a utilización do comando filaire MARS modelo 7800-500. Descubra os procedementos de instalación, as características, as funcións e as consignas de seguridade para o seu sistema CVC.
Preview MARS HVAC/R Service & Installation Catalog
Explore the comprehensive MARS catalog for HVAC/R service and installation products. Find essential components like air conditioner mounting brackets, condenser pads, vent kits, disconnect boxes, and more, designed for professional installation and reliable performance.
Preview Serie Auga-Auga MARS 24 (MW): Manual de instalación, funcionamento e mantemento
Guía completa para a serie auga-auga MARS 24 (MW), que abrangue os procedementos de instalación, funcionamento e mantemento para aplicacións comerciais. Inclúe nomenclatura do modelo, avisos de seguridade, mantemento do sistema de refrixeración, datos físicos e resolución de problemas.
Preview Manual do propietario do aire acondicionado inversor de descarga lateral de zona única MARS Hyper Heat
Comprehensive owner's manual for the MARS Hyper Heat Single Zone Side Discharge Inverter air conditioner. Includes safety precautions, operating conditions, maintenance, troubleshooting, and warranty details for models VCD24, 30, 36, 48, 60 SA Series.