Scosche HA1710B Double DIN Radio Install Dash Kit Instruction Manual

1. Introdución

This manual provides detailed instructions for installing the Scosche HA1710B Double DIN Radio Install Dash Kit. This kit is designed to facilitate the installation of an aftermarket car stereo into select 2001-05 Honda Civic vehicles, providing a factory-like appearance.

Please read all instructions carefully before beginning the installation process. Ensure all necessary tools and components are available.

2. Compatibilidade

This dash kit is compatible with select Honda Civic 2001-05 models. It is not compatible with Civic Si modelos.

For specific compatibility, refer to the fit guide image below. This kit is designed for Double DIN installations only.

Image: Fit Guide for Scosche HA1710B Dash Kit. This guide illustrates vehicle compatibility, specifically noting that the kit works with 2001-05 Honda Civic DX, LX, and EX models, but is not for use with Civic Si models. It also indicates that it is for Double DIN installations only.

Scosche Double DIN Kits accommodate True Double DIN stereos with a maximum faceplate opening of 96.8mm x 173mm. Some radios labeled as Double DIN may be oversized, potentially requiring minor trimming of the kit for a proper fit.

Image: Industry Standard Sized Opening. This diagram provides the dimensions for the stereo opening in the dash kit, which are 96.8mm (3-13/16 inches) in height and 173mm (6-13/16 inches) in width. This is for reference to ensure your aftermarket stereo will fit.

3. Contido do paquete

Verifique que todos os elementos que se indican a continuación estean incluídos no seu paquete:

• Radio Bezel (Dash Kit)
• Manual de instrucións
• Mounting Brackets (Left and Right)
• Hardware (screws, clips)

Image: Scosche HA1710B Dash Kit. This image displays the primary dash kit bezel, which frames the aftermarket stereo.

Imaxe: En ángulo view of the Scosche HA1710B Dash Kit. This perspective highlights the design and mounting tabs of the dash kit bezel.

Image: Car Stereo Dash Kit Components. This image shows the dash kit along with representations of a wire harness and antenna adapter, noting that the latter two are sold separately.

4. Información de seguridade

• Desconecte sempre o terminal negativo da batería do vehículo antes de comezar calquera traballo eléctrico para evitar curtocircuítos e descargas eléctricas.
• Use o equipo de protección individual axeitado, como lentes de seguridade.
• Asegúrese de que o vehículo estea aparcado nunha superficie nivelada co freo de estacionamento activado.
• Refer to your vehicle's service manual for specific instructions on removing factory components.
• If you are unsure about any step, consult a qualified professional installer.

5. Instalación

The following video provides a comprehensive overview of the installation process, from preparation to final testing. Detailed steps are also provided below.

5.1. Preparación

1. Desconectar batería: Disconnect the negative battery terminal of your vehicle.
2. Review Instrucións: Read through the entire instruction manual provided with the dash kit and your new stereo.
3. Identify Tabs: Despois de reviewing the instructions, identify and remove any tabs on the dash kit components that are not required for your specific application.

5.2. Factory Radio Removal

4. Remove Trim Panels: Using a panel removal tool, carefully pry off and remove any trim panels surrounding your factory stereo.
5. Unscrew Factory Radio: Locate and unscrew the mounting screws holding the factory radio in place.
6. Unplug Harnesses: Gently pull out the factory radio and unplug all electrical harnesses and antenna cables from the back.

5.3. Conexións de cableado

Connect the aftermarket stereo's wiring harness to the vehicle's wiring harness. Match wire colors according to the instructions provided with your aftermarket stereo and the Scosche wiring adapter (if purchased separately).

• Use splice connectors or solder connections for secure and reliable electrical contact.
• Ensure all connections are properly insulated with electrical tape or heat shrink tubing.
• Some wires, such as amplifier turn-on, parking brake sense, and steering wheel control connections, may require specific routing or additional adapters not included in this kit.

5.4. Dash Kit Assembly

7. Coloque os soportes: Secure the left and right mounting brackets to your new aftermarket stereo using the screws provided with the stereo.
8. Insert Stereo: Slide the assembled stereo and brackets into the dash kit bezel.

5.5. New Stereo Installation

9. Conectar cableado: Plug the vehicle's wiring harness into the aftermarket stereo's harness. Connect the antenna cable.
10. Monte estéreo: Carefully slide the new stereo assembly into the dashboard opening. Secure it with the factory mounting screws.
11. Reinstall Trim: Reattach all removed trim panels, ensuring they snap securely into place.

5.6. Pasos finais

12. Volver conectar a batería: Volve conectar o terminal negativo da batería.
13. Funcións de proba: Turn on the vehicle and test all functions of the new stereo, including audio, radio, and any connected accessories.

6. Funcionamento

This dash kit provides the mounting solution for your aftermarket stereo. For detailed operating instructions of your new stereo, please refer to the instruction manual provided by the stereo manufacturer.

7. Mantemento

• Periodically check the mounting screws for tightness.
• Clean the dash kit and stereo faceplate with a soft, damp pano. Evite produtos químicos agresivos ou produtos de limpeza abrasivos.
• Ensure no debris accumulates around the stereo or in the dash opening.

8 Solución de problemas

• Stereo does not power on:
  • Comprobe as conexións da batería.
  • Verify all wiring harness connections are secure and correct.
  • Check the stereo's fuse.
• Poor fit of stereo in dash kit:
  • Ensure all unnecessary tabs on the dash kit were removed.
  • Confirm your aftermarket stereo's dimensions are within the kit's specifications (96.8mm x 173mm). Minor trimming may be required for oversized units.
  • Verify factory radio brackets are used as required.
• Dash kit does not fit vehicle:
  • Double-check vehicle compatibility (2001-05 Honda Civic, non-Si models).
  • Ensure all factory components were removed correctly.

9. Especificacións

10. Garantía e soporte

The Scosche HA1710B Dash Kit is backed by Scosche's Limited Lifetime Warranty and Lifetime Tech Support.

For technical assistance or warranty claims, please contact Scosche customer support directly. Refer to the official Scosche websitio web ou a embalaxe do produto para obter información de contacto.