1. Produto rematadoview
The Forney 58402 is a heavy-duty Bakelite pin-type wall electrical receptacle designed for surface mounting. It features a 2-pole/3-wire grounding configuration, suitable for high-power applications. This receptacle is rated for 50 Amps at 125/250 Volts and conforms to NEMA 6-50 standards.
Características principais:
- Heavy duty Bakelite pin-type design for durability.
- Wall electrical receptacle for surface mounting.
- 2-pole/3-wire grounding for enhanced safety.
- 50 Amp with 125/250-Volt capacity.
- NEMA 6-50 electrical configuration.
Figura 1: Fronte view of the Forney 58402 Electrical Receptacle, showing the pin configuration and voltage/ampborrar valoracións.
2. Información de seguridade
AVISO: Electrical work can be hazardous. Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing this receptacle. Failure to do so may result in serious injury or death. If you are unsure about any part of these instructions, consult a qualified electrician.
- Asegúrese de que se cumpran todos os códigos eléctricos locais e nacionais.
- Empregar equipos de protección individual (EPI) axeitados, como luvas illantes e lentes de seguridade.
- Verificar o voltage e amperage of your circuit match the receptacle's ratings (50A, 125/250V).
- Do not use this receptacle if it appears damaged.
- Manter aos nenos lonxe das instalacións eléctricas.
3. Configuración e instalación
This section provides general guidelines for installing the Forney 58402 wall receptacle. Specific wiring configurations may vary based on local codes and existing electrical systems.
Ferramentas e materiais necesarios:
- Desaparafusadores (Phillips e Flathead)
- Descascados de fíos
- Voltagprobador
- Mounting screws (appropriate for surface)
- Caixa eléctrica (se non a hai xa)
Pasos de instalación:
- Desconectar a enerxía: Locate the circuit breaker or fuse controlling the circuit where the receptacle will be installed and turn it OFF. Verify power is off using a voltagprobador.
- Preparar superficie de montaxe: Ensure the surface is clean, dry, and structurally sound. The receptacle is designed for surface mounting.
- Mount the Receptacle Base: Position the receptacle base on the desired surface. Use appropriate mounting screws to secure it firmly. The back of the receptacle features pre-drilled holes for this purpose.
- Conexións de cable: This receptacle is a 2-pole/3-wire grounding type (NEMA 6-50). It typically requires two hot wires (L1, L2) and one ground wire.
- Strip approximately 1/2 inch of insulation from each wire.
- Connect the L1 (Hot) wire to one of the brass-colored terminals.
- Connect the L2 (Hot) wire to the other brass-colored terminal.
- Connect the Ground wire (typically green or bare copper) to the green hexagonal grounding screw.
- Cableado seguro: Ensure all wire connections are tight and secure. No bare wire should be exposed outside the terminals.
- Remontar: Carefully place the cover over the wired base and secure it with the provided screws.
- Restaurar enerxía: Once installation is complete and verified, turn the power back ON at the circuit breaker or fuse box.
Figura 2: Atrás view of the Forney 58402 Receptacle, showing the metal mounting plate and screw holes for surface installation.
Figura 3: Abaixo view of the Forney 58402 Receptacle, illustrating the internal wiring access points and terminals.
4. Instrucións de funcionamento
The Forney 58402 Electrical Receptacle is designed for straightforward operation.
- Verificar a compatibilidade: Ensure the plug of your electrical device is compatible with the NEMA 6-50 configuration of this receptacle.
- Inserir o enchufe: Align the pins of your device's plug with the slots on the receptacle and firmly insert the plug.
- Retirar o enchufe: To disconnect, grasp the plug firmly and pull it straight out from the receptacle. Do not pull by the cord.
Imaxe 4: Primeiro plano view of the Forney 58402 Receptacle's pin configuration, showing the 50A 250V markings.
5. Mantemento
Regular inspection and basic maintenance will help ensure the longevity and safe operation of your Forney 58402 receptacle.
- Inspección periódica: Annually inspect the receptacle for any signs of damage, cracks, discoloration, or loose connections.
- Limpeza: With power disconnected, gently wipe the exterior of the receptacle with a dry, clean cloth to remove dust or debris. Do not use liquid cleaners.
- Apretar conexións: If comfortable and with power disconnected, periodically check and tighten the terminal screws to ensure secure wire connections.
- Protección ambiental: Se está instalado no anuncioamp or dusty environment, ensure the receptacle is adequately protected from moisture and excessive dust accumulation.
6 Solución de problemas
If you experience issues with your Forney 58402 receptacle, consider the following common troubleshooting steps:
| Problema | Causa posible | Solución |
|---|---|---|
| No power from receptacle | Disyuntor disparado ou fusible fundido | Check your electrical panel and reset the breaker or replace the fuse. |
| No power from receptacle | Conexión de cableado solta | With power disconnected, inspect and tighten all wire connections within the receptacle. |
| O enchufe non encaixa | Incompatible plug type | Ensure your device's plug is a NEMA 6-50 type. Do not force incompatible plugs. |
| Receptacle feels hot | Overload or loose connection | Immediately disconnect power. Reduce load or check wiring. Consult an electrician if problem persists. |
If troubleshooting steps do not resolve the issue, or if you are unsure, contact a qualified electrician.
7. Especificacións
| Atributo | Valor |
|---|---|
| Marca | Forney |
| Modelo | 58402 |
| Tipo | Pin-Type Wall Receptacle |
| Ampera | 50 Amps |
| Voltage | 125/250 voltios |
| Configuración NEMA | 6-50 |
| Postes/Fios | Conexión a terra de 2 polos e 3 cables |
| Material | Bakelite (Housing), Plastic (Body) |
| Cor | Negro |
| Total de tomas de corrente | 1 |
| Dispositivos compatibles | All (NEMA 6-50 compatible) |
8. Garantía e soporte
Specific warranty details for the Forney 58402 Electrical Receptacle are not provided in this manual. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact Forney customer service directly.
You may visit the official Forney websitio web para obter información de contacto e recursos adicionais: www.forneyind.com
