Introdución
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Beverage-Air DW79-B-24 Remote Horizontal Bottle Cooler. Please read this manual thoroughly before operating the unit and retain it for future reference. This cooler is designed for commercial use, featuring a deep well design and self-contained refrigeration system for optimal beverage cooling.
Fronte view of the Beverage-Air DW79-B-24 bottle cooler, showcasing its black painted steel exterior, stainless steel top with three sliding lids, and integrated bottle opener on the right side.
Configuración e instalación
The Beverage-Air DW79-B-24 is a freestanding unit. Proper placement and initial setup are crucial for performance and longevity.
Desembalaxe
- Carefully remove all packaging materials, including any protective films or tapes.
- Inspect the unit for any shipping damage. Report any damage to your carrier immediately.
Colocación
- Place the cooler on a level, sturdy surface capable of supporting its weight (approximately 379 lbs when empty, plus contents).
- Ensure adequate ventilation around the unit. Do not block the air intake or exhaust vents.
- Avoid direct sunlight or proximity to heat-generating appliances.
- Dimensions: 80"W x 26-1/2"D x 33-3/4"H. Allow sufficient space for door operation and maintenance access.
Conexión eléctrica
- Connect the unit to a dedicated electrical circuit as specified on the product's data plate.
- Ensure the power supply matches the unit's requirements (e.g., voltage, ampera).
Posta en marcha inicial
- After placement and electrical connection, allow the unit to sit for at least 2 hours before plugging it in. This allows refrigerants to settle.
- Plug in the unit and allow it to reach the desired operating temperature before loading products.
Instrucións de funcionamento
Your Beverage-Air bottle cooler is designed for efficient and convenient beverage storage and dispensing.
Controis electrónicos
- The unit features electronic controls for precise temperature management. Refer to the control panel for temperature display and adjustment buttons.
- Set the desired temperature according to your beverage cooling requirements.
Cargando produtos
- Utilize the three sliding lids to access the deep well interior.
- Arrange beverages using the five adjustable epoxy coated wire dividers to optimize space and organization.
- The cooler has a case capacity of 32 cases (12 oz. bottles) or 45-3/4 cases (12 oz. cans). Do not overload the unit beyond its stated capacity.
- Ensure proper air circulation around products for efficient cooling.
Bottle Cap Opener and Catcher
- An integrated bottle cap opener and cap catcher are provided for user convenience.
- Regularly empty the cap catcher to prevent overflow.
Mantemento
Regular maintenance ensures optimal performance and extends the lifespan of your Beverage-Air cooler.
Limpeza do Exterior
- Clean the black painted steel exterior with a mild soap and water solution. Avoid abrasive cleaners.
- Limpe a parte superior de aceiro inoxidable con anuncioamp un pano e secar ben para evitar manchas de auga.
Limpeza do Interior
- Periodically clean the galvanized interior and epoxy coated wire dividers with a mild, food-safe cleaning solution.
- Ensure the unit is unplugged before cleaning the interior.
Limpeza de serpentíns do condensador
- The condenser coil should be cleaned regularly (e.g., monthly or quarterly, depending on environment) to maintain efficiency.
- Consult a qualified service technician for condenser coil cleaning, especially for units using R290 Hydrocarbon refrigerant.
Mantemento de xuntas
- Inspect door gaskets regularly for tears or damage. Clean them with warm, soapy water.
- Ensure gaskets form a tight seal to prevent cold air loss.
Resolución de problemas
This section provides solutions to common issues. For problems not listed or if issues persist, contact qualified service personnel.
| Problema | Causa posible | Solución |
|---|---|---|
| A unidade non arrefría | Power supply issue, thermostat setting, dirty condenser coil, blocked airflow. | Check power connection, adjust thermostat, clean condenser coil, ensure proper ventilation. |
| Ruído excesivo | Compoñentes soltos, obstrución do ventilador, problema co compresor. | Check for loose parts, clear obstructions, contact service if compressor related. |
| Auga no chan | Clogged drain line, excessive humidity, damaged drain pan. | Clear drain line, ensure proper sealing, inspect drain pan. |
Importante: Any repairs involving the refrigeration system or electrical components should only be performed by a certified technician.
Especificacións
| Característica | Detalle |
|---|---|
| Marca | Bebidas-Aire |
| Número de modelo | DW79HC-B |
| Acabado Exterior | Aceiro pintado de negro |
| Acabado interior | Galvanizado |
| Material superior | Aceiro inoxidable |
| Tipo de tapa | Solid, Sliding (3 lids) |
| Separadores | 5 adjustable epoxy coated wire dividers |
| Case Capacity (12 oz. bottles) | 32 casos |
| Case Capacity (12 oz. cans) | 45-3/4 cases |
| Tipo de refrixerante | R290 Hydrocarbon |
| potencia do compresor | 1 / 4 HP |
| Pés cúbicos | 24.1 cu. pés |
| Dimensións (ancho x profundo x alto) | 80" x 26-1/2" x 33-3/4" |
| Peso do elemento | 379 libras |
| Certificacións | cULus, UL EPH Classified, UL-Sanitation, Energy Star Compliant |
| Lugar de fabricación | Feito en USA |
Garantía e Soporte
For specific warranty information, please refer to the documentation provided with your purchase or contact Beverage-Air directly. General support inquiries can be directed to the manufacturer or your authorized dealer.
Fabricante: TigerChef (as per product specifications)
For service or technical assistance, please have your model number (DW79HC-B) and serial number ready.
