Introdución
The Videx Audio Kit 8K-1 Flush is an audio entry system designed for secure and convenient communication at entry points. This kit is part of the 8000 Series modular design, offering two-way speech, an electronic call tone, and a lock release facility. It is suitable for both indoor and outdoor usage.
Key components of the kit include:
- 1 x Speaker panel (flush mount)
- 1 x Flush Mounting Box
- 1 x 12vAC transformer
- 1 x Smart Handset
The door station features a stainless steel fascia with an aluminium surround and can accommodate up to 12 call buttons, each with a backlit nameplate. The wall-mounted telephone handset includes a lock release button and a three-position call tone volume control. Up to two additional telephones can be installed per apartment. An optional code lock with two codes, two changeover relay outputs, and an override input can be added, programmable from 1-99 seconds or for latching output.
Compoñentes do produto superadosview
This image displays the main components of the Videx Audio Kit 8K-1 Flush, including the speaker panel, the flush mounting box, the 12vAC transformer, and the smart handset. These parts work together to form the complete audio entry system.
Configuración e instalación
Proper installation is crucial for the optimal performance of your Videx Audio Kit 8K-1 Flush. It is recommended that installation be performed by a qualified technician.
Lista de verificación previa á instalación:
- Ensure all components listed in the kit contents are present.
- Verify power supply (12vAC) is available at the installation site.
- Prepare necessary tools (screwdrivers, wire strippers, drill, etc.).
- Lea atentamente todas as instrucións antes de comezar a instalación.
Pasos de instalación:
- Mounting the Flush Box: Securely install the flush mounting box into the wall or desired surface according to local building codes and wiring regulations. Ensure adequate space for wiring.
- Wiring the Speaker Panel: Connect the speaker panel to the system wiring. Refer to the detailed wiring diagram provided in the full manual for specific terminal connections for speech, call tone, and lock release.
- Connecting the Transformer: Connect the 12vAC transformer to the main power supply and to the speaker panel/system control unit as per the wiring diagram. Ensure power is OFF during wiring.
- Installing the Smart Handset: Mount the smart handset on the interior wall. Connect the handset wiring to the appropriate terminals, ensuring correct polarity for speech and call functions.
- Proba do sistema: After all connections are made, restore power and test the system. Verify two-way speech, call tone functionality, and lock release operation.
- Adjusting Call Tone Volume: Use the three-position switch on the handset to adjust the call tone volume to a comfortable level.
For detailed wiring diagrams and advanced configuration options (e.g., adding additional handsets or code locks), please consult the comprehensive technical manual.
Instrucións de funcionamento
Making a Call from the Door Station:
To call an apartment, the visitor presses the corresponding call button on the speaker panel. This will activate the electronic call tone inside the apartment.
Receiving a Call and Communication:
- When the call tone sounds, lift the smart handset.
- Two-way speech communication will be established with the visitor at the door station.
- To end the call, replace the handset on its cradle.
Operating the Lock Release:
During an active call, press the lock release button on the smart handset to momentarily activate the electric lock, allowing the visitor entry.
Adjusting Call Tone Volume:
The smart handset features a three-position switch for adjusting the call tone volume (low, medium, high) to suit your preference.
Mantemento
- Limpeza: Use un suave, damp cloth to clean the exterior surfaces of the speaker panel and handset. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspección: Periodically inspect all visible wiring and connections for any signs of wear or damage. Ensure the speaker panel's nameplate is clean and legible.
- Consideracións ambientais: While designed for outdoor use, ensure the speaker panel is not exposed to direct, prolonged water spray or extreme temperatures beyond its operating range.
- Servizo profesional: For any internal repairs or complex issues, contact a qualified service technician. Do not attempt to open or repair internal components yourself.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| No call tone when button is pressed. | No power to the system; faulty wiring; handset volume too low. | Check 12vAC transformer connection and power supply. Verify wiring connections. Adjust handset volume. |
| No two-way speech. | Incorrect wiring; faulty speaker/microphone; handset not lifted. | Check all speech wiring connections. Ensure handset is fully lifted. Contact support if components are suspected faulty. |
| Lock release not working. | No power to lock; faulty lock release button; incorrect wiring to lock. | Verify power to the electric lock. Check lock release button wiring. Ensure lock is compatible and correctly wired. |
| Backlit nameplate not illuminating. | Faulty LED/bulb; wiring issue. | Check wiring to the nameplate illumination. Contact support for replacement parts if necessary. |
If the problem persists after attempting these solutions, please contact Videx customer support or a qualified technician.
Especificacións
| Característica | Detalle |
|---|---|
| Marca | Videx |
| Número de modelo | 3K1 |
| Tipo de Kit | Audio Entry Kit |
| Tipo de montaxe | Flush Mount (Speaker Panel) |
| Fonte de alimentación | 12 VCA |
| Speaker Panel Dimensions (H x W x D) | 154 mm x 115 mm x 45 mm |
| Door Station Finish | Stainless steel fascia with aluminium surround |
| Botóns de chamada | Up to 12 (with backlit nameplate) |
| Funcións do teléfono | Lock release button, 3-position call tone volume control |
| Additional Handsets | Up to 2 per apartment |
| Funcións opcionais | Code lock (2 codes, 2 relay outputs, override input) |
| Peso do elemento | 4.4 libras (aprox. 2 quilogramos) |
| Uso interior/exterior | Exterior, Interior |
| Dispositivos compatibles | Orador |
| Cor | Black (referring to some components/accents) |
Información da garantía
Videx products are manufactured to high standards and come with a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Videx websitio web para obter información detallada sobre os termos e condicións da garantía.
Atención ao cliente
For technical assistance, troubleshooting, or spare parts, please contact Videx customer support. Have your product model number (3K1) and purchase details ready when contacting support.
Contact information (e.g., phone number, email, website) can typically be found on the manufacturer's official websitio ou embalaxe do produto.
