Introdución
This manual provides comprehensive instructions for the assembly, operation, and maintenance of the Velleman MK179 Proximity Card Reader Kit. The MK179 is designed for various access control and security applications, including opening doors, managing security systems, and authorizing equipment use. Please read these instructions carefully before beginning assembly or operation.
Características clave
- Easy Addition and Removal of Tags
- Coil Can Be Mounted Away From the Board
- Extremely Secure and Practically Safe Operation
Configuración e montaxe
The Velleman MK179 is supplied as a kit and requires assembly. Careful soldering and component placement are essential for proper functionality.
Identificación de compoñentes
Before starting, identify all components against the provided parts list (not included in this manual, refer to kit packaging). The main circuit board and the proximity cards are key elements.
Imaxe 1: The Velleman MK179 circuit board, showing various electronic components such as resistors, capacitors, integrated circuits, and a relay. This board forms the core of the proximity card reader.
Pasos de montaxe
- Preparar o espazo de traballo: Ensure a clean, well-lit workspace with appropriate soldering tools.
- Solder Components: Carefully solder all components onto the printed circuit board according to the silk screen markings and the kit's detailed instructions. Pay close attention to component orientation (e.g., diodes, ICs, electrolytic capacitors). Atención: Incorrect soldering can prevent the device from functioning. Double-check all solder joints for bridges or cold joints.
- Connect Coil: The proximity coil can be mounted directly on the board or remotely, allowing for flexible installation options. Ensure a secure connection to the designated terminals.
- Fonte de alimentación: Connect a stable 12V DC power supply to the designated input terminals. Observe correct polarity.
Imaxe 2: An assembled Velleman MK179 Proximity Card Reader Kit, showcasing the compact design of the circuit board with its components and the integrated relay.
Instrucións de funcionamento
The MK179 operates by reading unique identification codes from proximity cards (tags).
Imaxe 3: Two white proximity cards, included with the Velleman MK179 kit, used for activating the reader.
Adding and Removing Tags
The MK179 features an easy method for programming and de-programming proximity tags. Refer to the detailed instructions provided with your kit for the specific button presses and LED indicators for adding or removing tags. Generally, this involves:
- Para engadir un Tag: Activate the programming mode (e.g., by pressing a button for a specific duration), then present the new tag to the reader coil. The device will confirm successful addition (e.g., via an LED flash).
- To Remove a Tag: Activate the removal mode, then present the tag to be removed. The device will confirm removal.
Funcionamento normal
Unha vez tags are programmed, simply present a valid tag to the reader coil. The device will recognize the tag and activate its output (e.g., a relay closure) for a pre-set duration, allowing it to control connected devices like door locks or alarms.
Mantemento
The Velleman MK179 Proximity Card Reader Kit is designed for reliable operation with minimal maintenance.
- Limpeza: Keep the circuit board and reader coil free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
- Condicións ambientais: Ensure the device is operated within its specified environmental conditions (temperature, humidity) to prevent damage.
- Fonte de alimentación: Use only a stable and correctly rated 12V DC power supply. Fluctuations or incorrect voltagPodemos danar a unidade.
Resolución de problemas
If you encounter issues with your Velleman MK179, consider the following troubleshooting steps:
- O dispositivo non se acende:
- Comprobe as conexións da fonte de alimentación e asegúrese de que o volume sexa correctotage (12V DC) and polarity.
- Inspect for any short circuits or incorrect component placement on the assembled board.
- Tags Not Being Read:
- Asegurar o tag is presented within the effective reading range of the coil.
- Verifique que o tags have been correctly programmed into the device.
- Check the coil connection to the main board.
- Comportamento de saída incorrecto:
- Confirm the relay connections to the external device are correct.
- Review the programming steps for adding/removing tags to ensure no errors occurred.
- Problemas da asemblea:
- If the device does not function after assembly, carefully inspect all solder joints for quality. A common issue is a solder bridge between traces or a "cold" solder joint that doesn't make proper electrical contact.
- Verify that all components are in their correct positions and orientations.
Especificacións
| Número de modelo do artigo | MK179 |
| Dimensións do produto | 0.98 x 4.76 x 7.87 polgadas |
| Peso do elemento | 2.56 onzas |
| Marca | Velleman |
| Fabricante | Velleman |
| ASIN | B004XZPW0G |
| UPC | 836479009196 |
| País de Orixe | Polonia |
Soporte e Contacto
For further assistance or detailed technical support regarding your Velleman MK179 Proximity Card Reader Kit, please refer to the official Velleman websitio ou póñase en contacto co seu servizo de atención ao cliente.
Note: Specific warranty information is typically provided with the product packaging or on the manufacturer's official websitio.
