Sharp SPC106X

Sharp SPC106X LED Alarm Clock User Manual

Model: SPC106X

1. Introdución

Grazas pola compraasing the Sharp SPC106X LED Alarm Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new alarm clock. Please read these instructions thoroughly before using the device.

The Sharp SPC106X features a clear 1.0" blue LED display, an ultra-thin design, and essential alarm functions including snooze. It is designed for indoor use and operates electrically with battery backup capability.

2. Información de seguridade

  • Fonte de enerxía: Empregue só o adaptador de corrente especificado. Asegúrese de que o volumetage é compatible coa túa subministración eléctrica local.
  • Auga e humidade: Non expoña a unidade á choiva, á humidade nin a líquidos que goteen ou salpiquen. Non coloque obxectos cheos de líquido, como vasos, enriba da unidade.
  • Ventilación: Asegúrese de que haxa unha ventilación axeitada. Non bloquee as aberturas de ventilación.
  • Calor: Manteña a unidade lonxe de fontes de calor como radiadores, rexistros de calor, estufas ou outros aparellos (incluídos amplificadores) que producen calor.
  • Limpeza: Limpar só cun pano seco.
  • Baterías: If using backup batteries, ensure they are inserted with correct polarity. Remove batteries if the unit is not used for an extended period.

3. Contido do paquete

  • Sharp SPC106X LED Alarm Clock Unit
  • Power Adapter (attached)
  • Manual de usuario (este documento)

Note: Batteries are not included and must be purchased separately for backup functionality.

4. Produto rematadoview

Familiarize yourself with the components of your Sharp SPC106X alarm clock:

Sharp SPC106X LED Alarm Clock front view

Figura 1: Fronte View of Sharp SPC106X LED Alarm Clock. This image displays the front of the black alarm clock with a bright blue 1.0" LED display showing "12:01". Indicators for "PM" and "ALARM" are visible on the left side of the display. The "SHARP" logo is centered below the time. The clock features an ultra-thin design case and a stable base.

Controis e indicadores:

  • 1.0" Blue LED Display: Mostra a hora actual e a hora da alarma.
  • Indicador PM: Lights up when the time displayed is PM.
  • ALARM Indicator: Lights up when the alarm is set.
  • Botón TIME: Úsase para definir a hora actual.
  • Botón ALARMA: Úsase para configurar a hora da alarma.
  • Botón HORA: Adjusts the hour for time or alarm settings.
  • Botón MIN: Adjusts the minute for time or alarm settings.
  • Botón SNOOZE/DIMMER: Located on top, this button activates snooze during an alarm and adjusts display brightness.
  • ALARM ON/OFF Switch: Located on the side, this switch enables or disables the alarm.
  • LOUD/SOFT Switch: Located on the side, this switch adjusts the alarm volume.
  • Compartimento de batería: Located on the bottom for backup batteries (not included).

5. Configuración

5.1. Conexión de alimentación

  1. Unpack the alarm clock and its power adapter.
  2. Plug the power adapter into a standard household outlet. The LED display will illuminate.
  3. (Optional) For battery backup, open the battery compartment on the bottom of the unit and insert 2 AAA batteries (not included). This will preserve time settings during a power outage.

5.2. Axuste da hora actual

  1. Manteña premido o TEMPO botón. Os díxitos das horas comezarán a parpadear.
  2. Mentres sostén o TEMPO botón, prema HORA button repeatedly to advance to the correct hour. Observe the PM indicator for correct AM/PM setting.
  3. Mentres aínda sostén o TEMPO botón, prema MIN button repeatedly to advance to the correct minute.
  4. Soltar o TEMPO botón. A hora xa está axustada.

6. Instrucións de funcionamento

6.1. Configuración da alarma

  1. Manteña premido o ALARMA button. The alarm hour digits will begin to flash.
  2. Mentres sostén o ALARMA botón, prema HORA button repeatedly to set the desired alarm hour. Observe the PM indicator.
  3. Mentres aínda sostén o ALARMA botón, prema MIN button repeatedly to set the desired alarm minute.
  4. Soltar o ALARMA button. The alarm time is now set.

6.2. Activación/desactivación da alarma

  • Para activar a alarma, deslice o botón ALARMA ON / OFF switch (located on the side) to the "ON" position. The ALARM indicator on the display will light up.
  • Para desactivar a alarma, deslice o botón ALARMA ON / OFF switch to the "OFF" position. The ALARM indicator will turn off.

6.3. Uso da función de pospoñer a alarma

Cando soe a alarma, prema o botón grande SNOOZE / DIMMER button on top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes.

6.4. Adjusting Display Brightness (Dimmer)

Preme o SNOOZE / DIMMER button (when the alarm is not sounding) to cycle through different brightness levels (High, Low, Off) for the LED display.

6.5. Axustar o volume da alarma

Desliza o LOUD/SOFT switch (located on the side) to select your preferred alarm volume level.

7. Mantemento

  • Limpeza: Limpe a unidade cun pano suave e seco. Non empregue produtos de limpeza abrasivos nin solventes.
  • Substitución da batería: Replace backup batteries annually or when the display shows signs of dimming during power outages.
  • Almacenamento: Se garda o reloxo durante un período prolongado, retire as pilas de reserva para evitar fugas.

8 Solución de problemas

ProblemaCausa posibleSolución
A pantalla do reloxo está apagada.Sen poder nin poder outage.Ensure power adapter is securely plugged in. Check household power. If using battery backup, ensure batteries are fresh and correctly inserted.
Non soa a alarma.A alarma non está activada ou o volume é demasiado baixo.Check if the ALARM ON/OFF switch is in the "ON" position. Verify the ALARM indicator is lit. Adjust the LOUD/SOFT switch to a higher volume.
Time/Alarm cannot be set.Buttons not pressed correctly.Ensure you are pressing and holding the TIME or ALARM button while adjusting hours/minutes. Refer to sections 5.2 and 6.1.
A pantalla é demasiado brillante/escura.É preciso axustar o axuste do regulador de intensidade.Press the SNOOZE/DIMMER button (when alarm is not sounding) to cycle through brightness levels.

9. Especificacións

  • Modelo: SPC106X
  • Marca: Agudo
  • Cor: Negro
  • Tipo de visualización: LED dixital
  • Cor da pantalla: Azul
  • Tamaño da pantalla: 1.0 polgadas
  • Características especiais: Alarm, Snooze, Dimmer
  • Dimensións do produto: 2.2"W x 3.9"H (Note: The provided dimensions are for width and height, depth is not specified but implied by the compact design)
  • Fonte de enerxía: Electrical Operation (AC powered)
  • Copia de seguridade da batería: Si (pilas non incluídas)
  • Tipo de habitación: Dormitorio
  • Tipo de montaxe: Mesa
  • Material do cadro: Plástico
  • Peso do artigo: 9.6 onzas
  • Fabricante: MZ Berger
  • UPC: 049353612447

10. Garantía e soporte

Garantía limitada

MZ Berger & Company warrants to the original consumer purchaser of this product that it shall be free of defects in material and workmanship for one year from the purchase date. This warranty does not cover damage resulting from tampering, improper use, unauthorized modification, or misuse. This warranty is limited to repair or replacement of the product at MZ Berger's discretion.

To obtain warranty service, you must include a Proof of Purchase (sales receipt or photocopy) and a check or money order for USD $5.00 to cover the cost of handling. Also include your return address and a brief description of the issue. Ship the clock, postage prepago, ao enderezo seguinte:

Centro de Servizos MZ Berger
29-76 Northern Boulevard
Long Island City, NY 11101

Atención ao cliente

Please call Toll Free at 1-(800)-221-0131 for customer service assistance. Available Monday-Friday, 9:00 AM - 4:00 PM EST.

Please do not return the clock to the store without first contacting customer service.

Documentos relacionados - SPC106X

Preview Reloxo despertador LED SHARP SPC189/SPC193 con porto USB: manual de instrucións e garantía
Manual de instrucións oficial e información de garantía para o reloxo despertador LED SHARP SPC189 e SPC193 con portos de carga USB. Aprende a configurar a hora, a alarma, usar a repetición da alarma, a carga USB e as precaucións de seguridade.
Preview Reloxo despertador SPC268 Sunrise con porto USB: manual de instrucións e garantía
Manual de instrucións oficial e información de garantía para o reloxo despertador SHARP SPC268 con porto USB. Aprende a configurar o reloxo, as alarmas, a usar as luces do amencer e as luces que cambian de cor e a comprender as precaucións de seguridade.
Preview Reloxo despertador de proxección SHARP SPC543 con porto USB - Manual de instrucións
Manual de instrucións oficial e información de garantía para o reloxo despertador de proxección SHARP SPC543 con porto USB. Aprende a configurar o reloxo, a alarma e a data, a usar a función de proxección e a comprender as instrucións de seguridade.
Preview Manual do usuario e instrucións do reloxo despertador dixital LCD SHARP SPC500
Manual de usuario oficial e instrucións para o reloxo despertador dixital LCD SHARP SPC500. Aprende a configurar a hora, a configurar a alarma, a usar as funcións de repetición e retroiluminación e a comprender os avisos sobre a fonte de alimentación e a batería. Inclúe información da FCC.
Preview Manual do usuario do reloxo despertador dixital LCD SHARP SPC483/SPC222
Manual do usuario que contén instrucións para configurar e operar os reloxos despertadores dixitais LCD SHARP SPC483 e SPC222, incluíndo as características, a alimentación, o coidado e o cumprimento da normativa FCC.
Preview Reloxo despertador LED Sharp SPC182 con porto USB: manual de instrucións e garantía
Manual de instrucións oficial e información de garantía para o reloxo despertador LED Sharp SPC182 con porto USB. Obtén información sobre as características, a configuración, o funcionamento, as precaucións de seguridade e a atención ao cliente.