Introdución
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your OSRAM Sylvania QHE3x32T8/UNV-PSN-SC Fluorescent Lamp Ballast. Please read this manual thoroughly before installation and retain it for future reference. This ballast is designed for use with 3-lamp, 32W T8 fluorescent lamps and operates on 120-277V, 50/60Hz electrical systems.
Instrucións de seguridade importantes
WARNING: Risk of electric shock. Disconnect power before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local codes and ordinances.
- Asegurar a subministración voltage is compatible with the ballast's operating voltage (120-277V).
- Do not install damaged products. Inspect the ballast for damage before installation.
- Non faga nin altere ningún burato aberto nun recinto de cableado ou compoñentes eléctricos durante a instalación do kit.
- Para evitar danos ou abrasións no cableado, non expoña os cables a bordos de chapa ou outros obxectos cortantes.
- This ballast is designed for indoor use in dry locations unless otherwise specified.
- Ground the ballast case properly to prevent electrical hazards.
Produto rematadoview
The OSRAM Sylvania QHE3x32T8/UNV-PSN-SC is a high-efficiency, programmed rapid start electronic ballast designed for optimal performance with T8 fluorescent lamps. It features universal voltage input and lamp striation control for consistent light output.
Características principais:
- Programmed Rapid Start T8 Electronic Ballast
- Universal Voltage: 120-277 V, 50/60 Hz
- High-Efficiency - Type CC
- Alto Factor de Potencia
- Lamp Control de estrías
- Clasificación sonora A
- Inherent Thermal Protection
- UL Listed Class P, Type 1 Outdoor, Type CC
- Complies with FCC 47 CFR Part 18, Non-Consumer
- No PCBs
Imaxe 1: Arriba view of the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast, showing product labeling and specifications.
Instalación e cableado
Before beginning installation, ensure all power to the fixture is disconnected at the circuit breaker. Follow the wiring diagram carefully for proper and safe connection.
Diagrama de cableado:
Image 2: Detailed wiring diagram for the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast, illustrating connections for input power and lamp saídas.
Instrucións de cableado:
- Potencia de entrada: Connect the black wire to the LINE (L) input and the white wire to the NEUTRAL (N) input. Ensure the ground wire is securely connected to the ballast case and fixture ground.
- Lamp Conexións:
- Connect the blue/white wires to the first lamp.
- Connect the blue wires to the second lamp.
- Connect the red wires to the third lamp.
- Connect the yellow wires to the common lamp terminals as indicated in the diagram.
- Montaxe: Securely mount the ballast within the fixture using appropriate fasteners. Ensure adequate ventilation around the ballast.
- Voltage Compatibilidade: This ballast is designed for universal voltage operation (120V or 277V). Verify your supply voltage partidos.
Lamp Compatibilidade:
This ballast is compatible with the following T8 fluorescent lamp configuracións:
| Lamp Tipos | Line Current (120V) | Line Current (277V) | Min. Temp de inicio |
|---|---|---|---|
| 3 x FO32T8 | 0.69A | 0.29A | -20 °F/-29 °C |
| 3 x FO25T8 | 0.53A | 0.23A | -20 °F/-29 °C |
| 3 x FO17T8 | 0.36A | 0.16A | -20 °F/-29 °C |
| 2 x FO40T8 | 0.63A | 0.27A | 0 °F/-18 °C |
| 2 x FO32T8 | 0.51A | 0.23A | -20 °F/-29 °C |
Also suitable for "U" bend and SS equivalents.
Instrucións de funcionamento
Once properly installed and wired, the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast operates automatically. Upon applying power, the ballast will initiate the programmed rapid start sequence to ignite the connected fluorescent lamps. This ensures quick and reliable lamp ignition and extends lamp vida.
- Asegúrese de todo lamps are correctly seated in their sockets before applying power.
- The ballast is designed for continuous operation within its specified temperature and voltagintervalos e.
- No user adjustments are required for normal operation.
Mantemento
The OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast is designed for long-term, maintenance-free operation. However, periodic inspection of the lighting fixture and its components is recommended.
- Desconexión de alimentación: Always disconnect power at the circuit breaker before performing any inspection or maintenance.
- Limpeza: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, lint-free cloth for cleaning.
- Inspección de cableado: Comprobe periodicamente as conexións do cableado para comprobar se están ben axustadas e se presentan signos de desgaste ou danos.
- Lamp Substitución: Substitúe lamps with compatible T8 fluorescent lamps as specified in the "Lamp Compatibility" section. Ensure power is off during lamp substitución.
- Ballast Replacement: If the ballast fails, replace it with an identical OSRAM Sylvania QHE3x32T8/UNV-PSN-SC model or an approved equivalent.
Resolución de problemas
If your lighting fixture is not operating correctly, consult the following troubleshooting guide. Always disconnect power before attempting any inspection or repair.
| Problema | Causa posible | Solución |
|---|---|---|
| Lamps non se iluminan | Non hai enerxía para o dispositivo Cableado incorrecto Defectuoso lamps Lastre defectuoso | Comprobe o disxuntor e o interruptor de parede. Verificar o cableado co diagrama. Substitúe lamps with known good ones. Replace ballast if lamps are good and wiring is correct. |
| Lampparpadean ou son tenues | solto lamp conexións Incorrecto lamp tipo Baixo volume de entradatage Envellecemento lamps | Asegurar lampestán asentados de forma segura. Verificar lamps are compatible T8 types. Comprobar a subministración voltage. Substitúe lamps. |
| Ballast hums excessively | Montaxe solta Vol. incorrectotage Internal ballast issue | Aperte os parafusos de montaxe. Comprobar o voltage. Replace ballast if hum persists and is excessive. |
Especificacións técnicas
| Característica | Detalle |
|---|---|
| Número de modelo | QHE3x32T8/UNV-PSN-SC |
| Número de peza | 51413 |
| Marca | OSRAM (Manufacturer: Sylvania) |
| Vol. De entradatage | 120-277V AC |
| Frecuencia | 50/60 Hz |
| Lamp Tipo | T8 Fluorescent (e.g., F32T8, FO32T8, F25T8, F17T8, F40T8) |
| Número de Lamps | 3 (or 2 for F40T8/F32T8) |
| Wattage (per lamp) | 32W (for F32T8) |
| Método de inicio | Programmed Rapid Start |
| Eficiencia | High-Efficiency - Type CC |
| Factor de potencia | Alto Factor de Potencia |
| Peso do elemento | 1.32 libras (aprox. 0.6 kg) |
| Dimensións do produto (L x W x H) | 9.5 x 1.68 x 1.18 polgadas (aprox. 24.1 x 4.3 x 3.0 cm) |
| Min. Start Temperature | -20°F (-29°C) for most T8 lamps; 0°F (-18°C) for 2xFO40T8 |
| Certificacións | UL Listed, Type CC, FCC 47 CFR Part 18, RoHS compliant |
Información da garantía
OSRAM products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to the QUICKTRONIC® QHE3x32T8/UNV-PSN-SC ballast, please refer to the official OSRAM/Sylvania warranty documentation provided with your purchase or visit the OSRAM website. Typically, electronic ballasts come with a limited warranty covering defects in materials and workmanship under normal use.
Note: The "QUICK60+" System Warranty mentioned on the product label refers to a system warranty when used with specific OSRAM lamps. Consult OSRAM for details.
Atención ao cliente
For technical assistance, product inquiries, or support, please contact OSRAM/Sylvania customer service.
Technical Assistance Hotline: 1-800-LIGHTBULB (as indicated on product label)
You may also visit the official OSRAM websitio para obter recursos adicionais e opcións de contacto.
