MR BEAMS MB985

Mr Beams MB985 ReadyBright Wireless Power Outage LED Ceiling Light Instruction Manual

1. Produto rematadoview

The Mr Beams MB985 ReadyBright Ceiling Light is designed to provide reliable illumination during power outages. This wireless LED light automatically activates when a power failure is detected, offering up to 40 hours of bright light. It is part of the ReadyBright Wireless Power Outage LED Lighting System and is controlled by the Mr. Beams MB220 remote control (sold separately). This light is not motion-activated; its primary function is to provide emergency lighting.

Mr Beams MB985 ReadyBright Ceiling Light, top-down view

Imaxe 1.1: De arriba abaixo view of the Mr Beams MB985 ReadyBright Ceiling Light, showing its compact, round design and central LED.

2. Configuración e instalación

2.1 Que hai na caixa

  • Mr Beams MB985 ReadyBright Ceiling Light
  • Ferramentas de montaxe (parafusos)

Note: Batteries and the MB220 remote control are not included with this single ceiling light unit.

2.2 Instalación da batería

  1. Twist the back cover of the ceiling light counter-clockwise to open the battery compartment.
  2. Insert four (4) C-cell batteries, ensuring correct polarity (+/-).
  3. Replace the back cover by aligning and twisting clockwise until secure.

2.3 Montaxe da lámpada de teito

The MB985 ceiling light features simple wireless installation, requiring no electrician. It can be flush-mounted to a ceiling or wall.

  1. Select a desired mounting location on a ceiling or wall. Ensure the surface is suitable for screw installation.
  2. Separate the mounting plate from the light unit by twisting.
  3. Position the mounting plate at the chosen location and mark the screw holes.
  4. Using the provided screws, securely attach the mounting plate to the surface.
Hands screwing the mounting plate of the Mr Beams ceiling light into a ceiling

Image 2.1: A person's hands using a screwdriver to attach the white mounting plate to a ceiling surface.

  1. Align the ceiling light unit with the mounted plate and twist clockwise until it locks securely into place.
Hand attaching the Mr Beams ceiling light unit to its mounted base

Image 2.2: A hand holding the Mr Beams ceiling light unit, aligning it with the previously installed mounting plate on the ceiling.

3. Instrucións de funcionamento

The Mr Beams MB985 ReadyBright Ceiling Light operates as part of the ReadyBright Wireless Power Outage LED Lighting System. It is designed to work in conjunction with the Mr. Beams MB220 remote control (not included).

3.1 Potencia Outage Detección

  • Cando un poder outage occurs, the MB985 ceiling light will automatically detect the power failure and illuminate.
  • It provides up to 40 hours of continuous light on a single set of batteries during an outage.

3.2 Operación de control remoto

The MB985 light can be controlled manually using the MB220 remote control for convenience and to conserve battery life when not needed during an outage.

  • Use the remote to turn the light ON or OFF as desired.
  • The remote allows for maximum safety and convenience, enabling you to control the light from a distance.
Person holding a Mr Beams remote control, illuminating two ceiling lights in a room

Image 3.1: A person's hand holding the Mr Beams remote control, pointing towards two illuminated ceiling lights in a room, demonstrating remote operation.

3.3 Apagado automático

The light features an auto shut-off function to conserve battery life. If the light is activated during a power outage and no one is present, it will automatically turn off after a set period.

Mr Beams ceiling light illuminating a kitchen area where a woman and child are present

Image 3.2: A Mr Beams ceiling light providing illumination in a kitchen setting, with a woman and child visible, highlighting its use during an outage.

4. Mantemento

4.1 Substitución da batería

When the light output diminishes or the light fails to activate, it is time to replace the batteries. Follow the steps in Section 2.2 for battery installation.

4.2 Limpeza

To clean the light, gently wipe the exterior with a soft, damp pano. Non empregue produtos de limpeza abrasivos nin mergulle a unidade en auga.

5 Solución de problemas

ProblemaCausa posibleSolución
Light does not turn on during a power outage.Dead or incorrectly installed batteries. Not paired with a ReadyBright system.Check and replace batteries, ensuring correct polarity. Ensure the light is properly integrated with a ReadyBright system and MB220 remote.
Light falls from mounting location.Improper installation of mounting plate or light unit.Ensure mounting screws are securely fastened. Verify the light unit is twisted and locked firmly onto the mounting plate.
Light does not respond to remote control.Remote control batteries are dead or light is out of range.Replace batteries in the MB220 remote control. Move closer to the light unit.
A saída de luz é débil.Batería baixa.Replace the C-cell batteries in the ceiling light.

6. Especificacións

  • Modelo: MB985
  • Marca: MR BEAMS
  • Fonte de luz: LED
  • Fonte de enerxía: Cordless-electric (Battery-powered)
  • Pilas necesarias: 4 x C-cell batteries (not included)
  • Duración da batería: Up to 40 hours during power outage
  • Material: Plástico
  • Cor: Branco
  • Método de instalación: Montar a lavar
  • Características especiais: Wireless, Power Outage Detection, Remote Controlled (with MB220 remote)
  • Dimensións (aprox.): 25.4 x 22.9 x 17.8 cm (Package dimensions)

7. Garantía e soporte

For warranty information and customer support, please refer to the official Mr. Beams websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo de compra para reclamacións de garantía.

Documentos relacionados - MB985

Preview Saída de enerxía READYBRIGHT™tagInstrucións de instalación de luces electrónicas
Guía completa de instalación para MR BEAMS READYBRIGHT™ Power Outtage Lights (modelos MB220, MB785, MB985), que proporcionan instrucións paso a paso, características e información de seguridade para a iluminación de emerxencia.
Preview Manual do usuario do reflector de movemento de 2 cabezais Mr Beams MB12984 Pro
Manual de usuario detallado para o reflector de movemento de 2 cabezales Mr Beams MB12984 Pro con bañador de parede en cascada, que abrangue as especificacións, os modos de funcionamento, os axustes axustables e as instrucións de instalación.
Preview Lámpada de teito LED con sensor de movemento sen fíos MR BEAMS MB980: Guía de extracción do sensor de luz
Instrucións paso a paso para retirar o sensor de luz da lámpada de teito LED con sensor de movemento sen fíos MR BEAMS MB980. Aprende a personalizar a túa experiencia de iluminación.
Preview Guía de instalación da lanterna LED ultrabrillante Mr Beams MB470/MB480
Guía completa de instalación e uso da lanterna LED Mr Beams UltraBright (MB470/MB480), que detalla a configuración, as características, a carga e os modos de suspensión.
Preview Instrucións de instalación do foco LED ultrabrillante con sensor de movemento sen fíos Mr Beams MB380-390
Instrucións de instalación para o foco LED ultrabrillante con sensor de movemento sen fíos Mr Beams (MB380-390). Aprende a instalar e usar este foco LED activado por movemento para unha iluminación eficiente e duradeira.
Preview Instrucións de instalación do foco LED ultrabrillante con sensor de movemento sen fíos Mr Beams MB380-390
Guía de instalación para o foco LED ultrabrillante con sensor de movemento sen fíos Mr Beams MB380-390, que detalla as características, as pezas incluídas, os pasos de instalación e as precaucións sobre a batería para un uso óptimo.